rq - the queueing system
Ruby Shell HTML JavaScript CSS
Pull request Compare This branch is even with brightroll:master.
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Failed to load latest commit information.



RQ is a simple queueing/messaging system for any Unix system and can process messages in any language. It is designed to run on every machine in your distributed system. Think of it as another one of those small, but important services (like crond). It uses directories and json text files on the Unix filesystem as its database. It does not use a specialized database. As a result, it is easy to understand and debug.

Each item in the queue is a Message. Messages can be small, but RQ was designed for a medium to large granularity. For example, messages could have attachments with 100s to 1000s of megabytes. Each message can be processed by the local machine or relayed reliably to another machine for processing. These machines don't have to be in the same data center and in fact can be on another continent. When a message is received in a queue, a worker process is started to process the message. The worker process is one-to-one with a unix process. (some call this a 'forking' model). The code required to implement a worker is very small. Also, API is compatible with any language that runs on Unix. While a worker is processing a message, you can view a real-time display of logs (with ANSI colors) via the browser.

Here is a sample screenshot of a single queue:

Screen Shot

A brief overview of the system.

Once RQ is installed, the user creates a queue. The queue requires only a few parameters, but the most important one is the 'queue script'. This is a program written in any language that will process each message. The API for the queue script is easy to implement and described below. Whenever a message is received on that queue, this program runs. The program will either succeed, fail, or ask to retry x seconds in the future. If the script takes a long time to run, it can send periodic updates to RQ to indicate progress. The script can also provide a lot of logging and produces large files as output.

The RQ system provides a REST, HTML, cmd-line, or low-level socket API to work with messages and queues. That is all there is to it.

When would you use RQ? In a typical web application, you should always respond to the browser within a small time frame. You should also avoid using a lot of memory in this section of your application stack as well. If you know a particular computation will exceed those requirements, you should hand off the task to a queueing system.

If you have scripts that run via cron, you should probably run that under RQ. In this scenario, RQ will monitor that the script properly executed.

Here are some examples:

  • Transcoding a video file (high cpu)
  • Implement a large query for a user in the background
  • Have a queue for curl requests for URLs passed in
  • A processing pipeline of files stored in S3 (light map/reduce)
    • retrieve
    • filter
    • reduce
    • sftp to partner
  • Deploy an update to systems all over the world for user-facing web app (high latency)
  • Periodically rotate and send HTTP logs to a NoSQL database for search and analysis
  • Verify URLs with Internet Explorer (and take screenshots) on a box controllable via a simple web api
  • Spin up EC2 instances via AWS API

Table Of Contents

Quick Setup

  1. Clone this git repository
  2. Run ./bin/rq-install to create a config and a set of default queues.
  3. Run ./bin/rq-mgr start to start the rq-mgr process, one RQ process per queue, and the web interface.
  4. Run ./test/run_tests.sh to exercise the test suite.

An init style startup script is provided in bin/rc.rq, you may copy or symlink it to your system init directory.

RQ returns a complete HTTP URL for each enqueued message, therefore you must configure RQ with the canonical hostname for real-world use.


Hip Tips

  • Scripts should be idempotent if at all possible.
  • Messages should not go to error frequently
    • RQ can retry a message if the error is transient. If this is happening, something is wrong with your assumptions.
  • Do not fire and forget an RQ message.
    • It is ok to be more lax in side of the queue script that processes that message
  • Log output that might help someone other than you diagnose the issue
  • Crypto - sign and encrypt your message before giving it to RQ. Secure channels is too hard of a problem.
  • Use the status system for progress updates
  • Do not run RQ in production with the name 'localhost'
  • Master passing - Do not access other message directories unless the message is done
  • Don't take too long via the Web UI, there is a X second timeout

Config Files

At the top level, config/config.json provides primary configuration. A typical config:


  "realm":"Your RQ",
   "foo user":"bar pass"
} } }
Key Description
env Environment for RQ_ENV
host Hostname used for canonical full message ID
port Port for the web UI to listen on (required, but default is 3333)
addr Addr for the web UI to listen on ( for all interfaces)
tmpdir Directory for temp files
allow_new_queue Boolean, enable the new queue web UI, default false
relative_root Path prefix for the web UI, default /
basic_auth Hash for HTTP Basic authentication, has two required elements
basic_auth: realm Realm for HTTP Basic
basic_auth: users Hash of username:password pairs

Fields in bold are mandatory, all others are optional.

Queue Config Files

Within each queue directory, the files config.json and form.json provide configuration. A typical config:


  {"cron":"*/10 * * * *",  "param1":"10m"},
  {"cron":"@hourly",       "param1":"1h"}
] }


{"default":"hidden","mesg_param1":{"label":"Frequency of run","help":"Tell the script its run interval"}}
Key Description
name Name of the queue
script Path to the script to execute for each message
num_workers Maximum number of messages to process at a time, default 1
exec_prefix This is prepended to the script path before calling exec(), default bash -lc
env_vars Hash of environment variables and values set before calling exec(), default empty
coalesce_params Array of param numbers. Coalesce messages if they have identical parameters, default []
blocking_params Array of param numbers. Run one message with identical parameters at a time, default []
schedule Array of hashes of cron-like scheduled jobs
schedule[]: cron A cron-like five element recurring schedule, see crontab(5)
schedule[]: paramN Optional param1-param4 will be passed to each scheduled job

Fields in bold are mandatory, all others are optional.

Scheduled jobs may be queued up to 1 minute in advance, with a due time set to match the scheduled time. Scheduled jobs will only be created if the queue is in UP state - a paused or downed queue will not schedule new jobs. Multiple schedules are supported and each can have different params.


  • Messages cannot be guaranteed to be delivered in order
  • Messages are unique per machine and should use the unique host name
  • Messages can be guaranteed to be delivered intact when relayed (MD5)
  • RQ will not respond with an OK if a message cannot be commited to disk
  • Queue Scripts that are referenced via symlinks are resolved to their full path before execution
    • (This is especially helpful when you have scripts running and you deploy a new version)
  • Files are consistent

It tries hard to

  • insure message is in identical state every run

  • avoid duplicate messages aka - there is a small chance that messages might be duplicated.

It does not try hard to guarantee ordering

  • messages might come in out-of-order. this may happen as a result of a failure in the system or operations repointing traffic to another rq

given the above, use timestamp versioning to insure an older message doesn't over-write a newer message. if you see the same timestamp again for a previously successful txn, it might be that ultra-ultra rare duplicate, so drop it.

  • You must exit properly with the proper handshake.

Your First Queue Script


Here's a simple example script in Ruby:

#!/usr/bin/env ruby

# NOTE: Ruby buffers stdout, so you must fflush if you want to see output
#       in the RQ UI


def write_status(state, mesg = '')
  io = IO.for_fd(ENV['RQ_WRITE'].to_i)
  msg = "#{state} #{mesg}\n"

write_status('run', "just started")
sleep 2.0



write_status('run', "pre lsof")
log(`lsof -p $$`)
write_status('run', "post lsof")

5.times do
  write_status('run', "#{count} done - #{5 - count} to go")
  sleep 1.0
log("done sleeping")



Here's a simple example script in Bash:


# The variable RQ_WRITE is a pipe to the RQ queue
function write_status {
  echo $1 $2 >&$RQ_WRITE

# The variable RQ_READ is a pipe from the RQ queue
function read_status {
  read -u $RQ_READ

write_status "run"  "Looking for RQ environment variables"

echo "----------- RQ env ---------"
env | grep RQ_
echo "-----------------------------"

write_status "run" "Finished looking for RQ environment variables"

if [ "$RQ_PARAM1" == "slow" ]; then
  echo "This script should execute slowly"
  write_status "run" "start sleeping for 30"
  sleep 30
  write_status "run" "done sleeping for 30"

if [ "$RQ_PARAM1" == "err" ]; then
  echo "This script should end up with err status"
  write_status "err" "by design"
  exit 0

if [ "$RQ_PARAM1" == "duplicate" ]; then
  echo "This script should create a duplicate to the test_nop queue"
  write_status "run" "start dup"
  write_status "dup" "0-X-test_nop"

  if [ "$REPLY" != "ok" ]; then
    echo "Sorry, system didn't dup test message properly : $REPLY"
    write_status "err" "duplication failed"
    exit 0

  if [ "$REPLY" == "ok" ]; then
    write_status "run" "done dup"

write_status "done" "script completed happily"

Queue Script API


When a queue has a message to process, and a slot is available to run, the queue script will be executed in a particular environment. This environment passes information about the message to the script via two ancient forms of Interprocess Communication: Environment variables and the filesystem.

Current Dir = [que]/[state]/[short msg id]/job/

Full Msg ID = host + q_name + msg_id

Variable Description
RQ_SCRIPT The script as is defined in config file
RQ_REALSCRIPT The fully realized path (symbolic links followed, etc)
RQ_HOST Base URL of host (Ex. "http://localhost:3333/")
RQ_DEST Msg Dest Queue (Ex. http://localhost:3333/q/test/)
RQ_DEST_QUEUE Just Queue Name (Ex. 'test')
RQ_MSG_ID Short msg id (Ex. "20091109.0558.57.780")
RQ_FULL_MSG_ID Full msg id of message being processed (Ex. http://rq.example.com:3333/q/test/20091109.0558.57.780)
RQ_MSG_DIR Dir for msg (Should be Current Dir unless dir is changed by script)
RQ_READ Read side pipe FD to the Queue management process
RQ_WRITE Write side pipe FD to the Queue management process
RQ_COUNT Number of times message has been relayed or processed
RQ_PARAM1 param1 for message
RQ_PARAM2 param2 for message
RQ_PARAM3 param3 for message
RQ_PARAM4 param4 for message
RQ_FORCE_REMOTE Force remote flag
RQ_PORT port number for RQ web server, default = 3333
RQ_ENV Typically one of 'production', 'development', or 'test'
RQ_VER RQ version

Logs and Attachments

Pipe Protocol

A queue script communicates with its parent RQ process over a pair of pipes. The pipe file descriptor numbers are provided in the RQ_READ and RQ_WRITE environment variables, named from the perspective of the queue script.

The queue script's stdin is closed, and its stdout and stderr are redirected to a file.

The queue script protocol follows this grammar:

CMD Space Text Newline
CMD = run | done | err | relayed | RESEND | DUP

resend detail:
  RESEND     = resend DUE Dash Text
  DUE        = Integer

dup detail:
  DUP        = due Dash FUTUREFLAG Dash NEWDEST
  DUE        = Integer
  NEWDEST    = An RQ queue path

dup response:
  STATUS     = ok | fail
  CONTENT    = for ok: <new message id> | for fail: <failure reason text>

For obvious reasons, the Text cannot have any newline characters. There is no limit to Text length, but in practice it should not exceed a few hundred bytes.

Command Description
run When the script is running, it is in 'run'. To send an updated status to the operator about the operation of the script, just send a 'run' with TEXT as the status.
    | example: `run Processed 5 of 15 log files.<nl>`

done | When the script is finished, and has successfully performed its processing. It sends this response. It must also exit with a 0 status or it will go to 'err'. | example: done Script is done.<nl> err | When the script has failed, and we want to message to go to 'err' (probably to notify someone that something has gone wrong and needs operator attention). Any exit status at this point will take the message to 'err'. | example: err Database dump script failed.<nl> relayed | This is used by the relay queue and should not be used by a user queue script. resend | When the script has failed, but we want to just retry running it again, we respond with a 'resend'. This will cause a message to go back into 'que' with a due time of X seconds into the future. | example: resend 300-Memcached at foo.example.com not responding.<nl> dup | Create a clone of the existing message (including attachments) to the new destination. NOTE: This is the first status response that is a 2 way conversation with the queue process. If the queue does match /^https?:/, then it goes to 'relay' to be sent on. Otherwise it is considered a local. If relay or the local queue doesn't exist or is admin DOWN/PAUSE, then the the response will indicate failure. This resets the current count for the newly generated message. | example: dup 0-X-http://rq.example.com/q/queuename<nl>

Special Queues

  • cleaner - this queue's script periodically removes old messages.
  • relay - this queue's script sends messages to a separate system. Whenever RQ locally is given a message that is destined for a separate host, the message actually goes into this queue.
  • webhook - this queue's script does webhook notifications for any message that requests it.


We use Unix Domain Sockets for the primary RPC mechanism. They work just like TCP sockets, except we don't have to worry about network security. You rendezvous with the listening process via a special file on the filessystem. They are better than pipes since they provide 2 way communication.

There are 3 primary systems that make up RQ. The rq-mgr process, the individual rq queue processes, and the web server process.

The primary process is the rq-mgr process. It sets up a Unix Domain socket and communicates via that for its primary API. Its primary function is to watch over and restart the individual RQ queue processes. It maintains a standard Unix pipe to the child RQ process to detect child death.

Each queue gets its own process. They also communicate. These monitor their queue directories and worker processes. They have the state of the 'que' queue in memory. It also uses a standard unix pipe to communicate with the rq-mgr. For queue scripts it maintains.

The web server exists to give RQ a human (HTML) and non-human (REST) interface using the HTTP standard. This makes it easy to use via a browser, cURL, or with just about any HTTP lib that comes with any language.

Queue States

  - starting
  - running
  - finishing
  - relay

Two-Phase Commit for Protocol

Sender         Receiver
------         --------
if no id,
         -----> alloc_id
   id    <-----

 use stored
         -----> prep, id
 ok |        <-----
  -> continue
 fail/unknown |    <-----
  -> fail job
 ok/already commited |    <-----
  -> mark job done

  modify or make
         <----->  attach/etc

ok, commit
          ----->  commit
 ok |        <-----
  -> mark job done


Dru Nelson http://github.com/drudru @drudru

Aaron Stone http://github.com/sodabrew @sodabrew

The overall concepts are very similar to the original UUCP systems that used to span the internet.

The idea for the directory storage was copied from the Qmail architecture by Dan J. Bernstein.

The code for RQ was largely written in-house.

Thanks to the BrightRoll engineers who used the system to help work the bugs out.

http://github.com/TJeezy is largely responsible for making RQ look a lot better.

I looked to resque for inspiration for this documentation. I treat it as a goal that I still want to achieve.

Good links on Unix Process stuff:

Daemons in unix http://www.enderunix.org/docs/eng/daemon.php

Good Link on Straight Up, Old Skool Pipes http://www.cim.mcgill.ca/~franco/OpSys-304-427/lecture-notes/node28.html

Process control http://www.steve.org.uk/Reference/Unix/faq_2.html