Skip to content
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
32 lines (22 sloc) 1009 Bytes

You can control attached servo motors from the servo assembly. By default, servos will be unpowered when your robot starts, and can freely rotate when turned by hand. Upon setting a value, they will hold the corresponding position. They will become unpowered again when you turn off your robot, unplug your USB stick, or set their position to the special value None.

Querying servos

The servo assembly can interface with up to sixteen servos connected to it.

servo_one = r.servo_board.servos[1]

{{% notice tip %}} Servo can be connected to any port, you don't have to start at 0! {{% /notice %}}

Controlling servos

Servos can be controlled using the position parameter. This should be set to a value between -1 and 1.

servo_one.position = 0.65
>>> 0.65

{{% notice tip %}} When position is set to None, the servo loses power and can freely rotate. This is the same state they're in at start-up. {{% /notice %}}

You can’t perform that action at this time.