SparkFun Qwiic Dual Solid State Relay (COM-16810)
The SparkFun Qwiic Dual Solid State Relay integrates two solid state relays on to a single board allowing you to control both of them from a microcontroller via I2C with the Qwiic Ecosystem. The relays are rated for 25A @240VAC so you can control some serious power with this board.
The Qwiic Dual Solid State Relay comes fully assembled and uses the simple Qwiic interface. No soldering, no voltage translation, no figuring out which pin is SDA or SCL, just plug and go!
Note: Controlling high voltage (110/220VAC) requires certain precautions. A beginner can do it but if you're wary of working with high voltage, you may want to consider the pre-made IoT Power Relay. It's not controlled via I2C but the IoT Power Relay contains shielding to prevent accidental shock.
- /Firmware - Latest firmware
- /Hardware - Eagle design files (.brd, .sch)
- /Production - Production panel files (.brd)
- SparkFun Qwiic Relay Arduino Library - Arduino library for SparkFun Qwiic Relay boards.
- SparkFun Qwiic Relay Python Package - Python package for SparkFun Qwiic Solid State Relay boards.
- Hookup Guide - Basic hookup guide for the Qwiic Dual Solid State Relay.
- SparkFun Fritzing repo - Fritzing diagrams for SparkFun products.
- SparkFun 3D Model repo - 3D models of SparkFun products.
- COM-16810- Initial release of the Qwiic Dual Solid State Relay.
This product is open source!
Please review the LICENSE.md file for license information.
If you have any questions or concerns on licensing, please contact technical support on our SparkFun forums.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.