Skip to content
This is a breakout board for the glass ferrule type fuse.
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
Documentation
Hardware
.gitattributes
.gitignore
LICENSE.md
README.md

README.md

SparkFun Fuse Breakout Board

SparkFun Fuse Breakout Board SparkFun Fuse Breakout Kit
SparkFun Fuse Breakout Board [BOB-15697] SparkFun Fuse Breakout Kit [KIT-15702]

This is a breakout board for the glass ferrule type fuse. It fits great with our 5mm fuse clips. Fuses are pretty simple, if current exceeds the rating of the fuse, the small filament inside the fuse heats up and breaks (like a light bulb burning out). The circuit is then broken and hopefully your circuit is saved from molten destruction.

For smaller loads, you may want to checkout a PTC (aka resettable fuse). They handle less current (500mA) but can be set and reset many times without doing harm to your system.

Note: The PCB was designed for DC power. It was not designed for AC power. Make sure that you are using the fuse breakout on the DC side for protection!

Repository Contents

  • /Documentation - Data sheets, additional product information
  • /Hardware - Eagle design files (.brd, .sch)

Repository Contents

Product Versions

  • BOB-15697 - Breakout board, V1
  • KIT-15702 - Kit version with breakout, glass fuse, connectors, and clips

License Information

This product is open source!

Please review the LICENSE.md file for license information.

If you have any questions or concerns on licensing, please contact technical support on our SparkFun forums.

Distributed as-is; no warranty is given.

  • Your friends at SparkFun.

You can’t perform that action at this time.