diff --git a/Firmware/LoRaSerial/Commands.ino b/Firmware/LoRaSerial/Commands.ino
index ac8b1cdf..f87288e3 100644
--- a/Firmware/LoRaSerial/Commands.ino
+++ b/Firmware/LoRaSerial/Commands.ino
@@ -145,7 +145,7 @@ bool commandAT(const char * commandString)
         return true;
 
       case ('G'): //ATG - Generate a new netID and encryption key
-        generateRandomKeysID();
+        generateRandomKeysID(&tempSettings);
         return true;
 
       case ('I'): //ATI
@@ -199,17 +199,7 @@ bool commandAT(const char * commandString)
         }
 
         reportOK();
-        if (serialOperatingMode == MODE_VIRTUAL_CIRCUIT)
-        {
-          //Notify the PC of the serial port failure
-          serialOutputByte(START_OF_VC_SERIAL);
-          serialOutputByte(3);
-          serialOutputByte(PC_SERIAL_RECONNECT);
-          serialOutputByte(myVc);
-        }
-        outputSerialData(true);
-        systemFlush();
-        systemReset();
+        commandReset();
         return true;
     }
   }
@@ -852,6 +842,7 @@ void reportOK()
   commandComplete(true);
 }
 
+//Notify the host that the command is complete
 void commandComplete(bool success)
 {
   if (settings.operatingMode == MODE_VIRTUAL_CIRCUIT)
@@ -867,6 +858,22 @@ void commandComplete(bool success)
   }
 }
 
+//Notify the host of the reset then reboot the system
+void commandReset()
+{
+  if (serialOperatingMode == MODE_VIRTUAL_CIRCUIT)
+  {
+    //Notify the PC of the serial port failure
+    serialOutputByte(START_OF_VC_SERIAL);
+    serialOutputByte(3);
+    serialOutputByte(PC_SERIAL_RECONNECT);
+    serialOutputByte(myVc);
+  }
+  outputSerialData(true);
+  systemFlush();
+  systemReset();
+}
+
 //Remove any preceeding or following whitespace chars
 char * trimCommand()
 {
diff --git a/Firmware/LoRaSerial/LoRaSerial.ino b/Firmware/LoRaSerial/LoRaSerial.ino
index 02345167..2270ceef 100644
--- a/Firmware/LoRaSerial/LoRaSerial.ino
+++ b/Firmware/LoRaSerial/LoRaSerial.ino
@@ -487,7 +487,6 @@ bool trainingPreviousRxInProgress = false; //Previous RX status
 float originalChannel; //Original channel from HOP table while training is in progress
 uint8_t trainingPartnerID[UNIQUE_ID_BYTES]; //Unique ID of the training partner
 uint8_t myUniqueId[UNIQUE_ID_BYTES]; // Unique ID of this system
-unsigned long trainingTimer;
 
 //Virtual-Circuit
 int8_t cmdVc;   //VC index for ATI commands only
@@ -509,6 +508,7 @@ unsigned long retransmitTimeout = 0; //Throttle back re-transmits
 //Global variables
 //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 const Settings defaultSettings;
+Settings settings; //Active settings used by the radio
 Settings tempSettings; //Create a duplicate of settings during training so that we can resort as needed
 
 char platformPrefix[25]; //Used for printing platform specific device name, ie "SAMD21 1W 915MHz"
diff --git a/Firmware/LoRaSerial/States.ino b/Firmware/LoRaSerial/States.ino
index 08028fc6..4d7e019c 100644
--- a/Firmware/LoRaSerial/States.ino
+++ b/Firmware/LoRaSerial/States.ino
@@ -1722,9 +1722,7 @@ void updateRadioState()
                   && tempSettings.server == false)
               {
                 //Reboot the radio with the newly generated random netID/Key parameters
-                petWDT();
-                systemFlush();
-                systemReset();
+                commandReset;
               }
             }
             break;
diff --git a/Firmware/LoRaSerial/Train.ino b/Firmware/LoRaSerial/Train.ino
index bb8ae162..3b598185 100644
--- a/Firmware/LoRaSerial/Train.ino
+++ b/Firmware/LoRaSerial/Train.ino
@@ -10,7 +10,7 @@ void selectTraining()
 //Generate new netID/AES key to share
 //We assume the user needs to maintain their settings (airSpeed, numberOfChannels, freq min/max, bandwidth/spread/hop)
 //but need to be on a different netID/AES key.
-void generateRandomKeysID()
+void generateRandomKeysID(Settings * radioSettings)
 {
   if ((settings.debug == true) || (settings.debugTraining == true))
   {
@@ -22,24 +22,24 @@ void generateRandomKeysID()
   randomSeed(radio.randomByte());
 
   //Generate new NetID
-  settings.netID = random(0, 256); //Inclusive, exclusive
+  radioSettings->netID = random(0, 256); //Inclusive, exclusive
 
   //Generate new AES Key. User may not be using AES but we still need both radios to have the same key in case they do enable AES.
   for (int x = 0 ; x < 16 ; x++)
-    settings.encryptionKey[x] = random(0, 256); //Inclusive, exclusive
+    radioSettings->encryptionKey[x] = random(0, 256); //Inclusive, exclusive
 
   //We do not generate new AES Initial Values here. Those are generated during generateHopTable() based on the unit's settings.
 
   if ((settings.debug == true) || (settings.debugTraining == true))
   {
     systemPrint("Select new NetID: ");
-    systemPrintln(settings.netID);
+    systemPrintln(radioSettings->netID);
 
     systemPrint("Select new Encryption Key:");
     for (uint8_t i = 0 ; i < 16 ; i++)
     {
       systemPrint(" ");
-      systemPrint(settings.encryptionKey[i], HEX);
+      systemPrint(radioSettings->encryptionKey[i], HEX);
     }
     systemPrintln();
     outputSerialData(true);
@@ -62,7 +62,6 @@ void beginTrainingClient()
     changeState(RADIO_TRAIN_WAIT_TX_FIND_PARTNER_DONE);
   else
     changeState(RADIO_TRAIN_WAIT_RX_RADIO_PARAMETERS);
-  trainingTimer = millis();
 }
 
 //Start the training in server mode
@@ -206,7 +205,5 @@ void endClientServerTraining(uint8_t event)
   trainingServerRunning = false;
 
   //Reboot the radio with the new parameters
-  petWDT();
-  systemFlush();
-  systemReset();
+  commandReset();
 }
diff --git a/Firmware/LoRaSerial/settings.h b/Firmware/LoRaSerial/settings.h
index f0bae7e3..77df43bb 100644
--- a/Firmware/LoRaSerial/settings.h
+++ b/Firmware/LoRaSerial/settings.h
@@ -19,7 +19,7 @@ typedef enum
   RADIO_DISCOVER_SCANNING,
   RADIO_DISCOVER_WAIT_TX_FIND_PARTNER_DONE,
   RADIO_DISCOVER_STANDBY,
-  
+
   //Multi-Point: Datagrams
   RADIO_MP_STANDBY,
   RADIO_MP_WAIT_TX_DONE,
@@ -518,7 +518,6 @@ typedef struct struct_settings {
   //-- Add commands to set the parameters
   //-- Add parameters to routine updateRadioParameters
 } Settings;
-Settings settings;
 
 //Monitor which devices on the device are on or offline.
 struct struct_online {