Skip to content

sparkfun/SparkFun_Qwiic_pHAT_Extension

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

17 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SparkFun Raspberry Pi 400 Qwiic pHAT Extension

SparkFun Raspberry Pi 400 Qwiic pHAT Extension

SparkFun Raspberry Pi 400 Qwiic pHAT Extension (DEV-17512)

The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 provides you with a quick and easy solution to access all of the 400's GPIO, stack your favorite HAT right-side up, or connect a Qwiic-enabled device to the I2C bus (GND, 3.3V, SDA, and SCL). Since the Qwiic system allows for daisy-chaining boards with different addresses, you can also stack as many sensors as you’d like to the mounting holes on the pHAT to create a tower of sensing power!

The Qwiic pHAT Extension connects to the Raspberry Pi 400's GPIO using a 2x20 right angle header and extends out to the edge of the PCB. Two Qwiic connectors are included on each side of the board for easy access to the I2C bus. A set of large silicone bumpers have also been included for better stability when connecting the Qwiic pHAT Extension to the Raspberry Pi 400's GPIO port.

Repository Contents

  • /Hardware - Eagle design files (.brd, .sch)
  • /Production - Production panel files (.brd)

Documentation

Product Versions

Version History

  • v1.0 - Initial Release

License Information

This product is open source!

Please review the LICENSE.md file for license information.

If you have any questions or concerns on licensing, please contact technical support on our SparkFun forums.

Distributed as-is; no warranty is given.

  • Your friends at SparkFun.