SparkFun Power Belivery Board - USB-C (Qwiic) (DEV-15801)
The Power Delivery Board uses the STUSB4500 power delivery controller which can be configured over I2C. This library talks to the controller to configure a USB Type-C power delivery adapter to switch the voltage from 5V up to 20V and 5A of current.
Library written by Alex Wende (SparkFun).
- /examples - Example sketches for the library (.ino). Run these from the Arduino IDE.
- /src - Source files for the library (.cpp, .h).
- keywords.txt - Keywords from this library that will be highlighted in the Arduino IDE.
- library.properties - General library properties for the Arduino package manager.
- Installing an Arduino Library Guide - Basic information on how to install an Arduino library.
- Product Repository - Main repository (including hardware files) for the Power Delivery board.
- Power Delivery Board Hookup Guide - Hookup Guide for the Power Delivery Board.
This product is open source!
Various bits of the code have different licenses applied. Anything SparkFun wrote is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round! Anything Maxim wrote has its own license. Anything that was co-writing with Peter Jansen is BSD.
Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.