Code for the tutorial available from SparkFun Electronics
Squirrel Other
Switch branches/tags
Nothing to show
Clone or download
nseidle now makes all datums lower case.
In the past "myData" was valid as a field name. Now, during setup makes these fields all lower case so when you publish
to the channel you have to use all lower case names.
Latest commit 8fb4f80 Oct 12, 2015

Wimp Weather Station

Wimp Weather Station

A wireless weather station based on the Electric Imp

The Wimp is a personal weather station that uses the weather shield along with an Electric Imp to push live weather data up to Wunderground. You can help increase the accuracy and prediction of weather by adding a weather meter to your house! But why buy an off-the-shelf system when you can build you own? For around $250 you can build a cutting edge open source station that you have complete control over! All you need is a pile of parts and access to a Wifi network.

Read the tutorial on how to setup your own weather station wirelessly connected to Wunderground.

Repository Contents

The sketch to be loaded onto the Arduino is called Wimp_Weather_Station.ino. The Squirrel code that goes on the electric imp is called agent.nut and device.nut for the two parts of Imp code.

License Information

The hardware is released under Creative Commons ShareAlike 4.0 International. The code is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!

Distributed as-is; no warranty is given.