Permalink
Switch branches/tags
Nothing to show
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
154 lines (124 sloc) 6.63 KB
/**
* Copyright (c) 2016 - 2018, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef PCA10056_H
#define PCA10056_H
#ifdef __cplusplus
extern "C" {
#endif
#include "nrf_gpio.h"
#define LEDS_NUMBER 2
#define LED_1 NRF_GPIO_PIN_MAP(0,7)
#define LED_2 NRF_GPIO_PIN_MAP(0,14)
#define LED_START LED_1
#define LED_STOP LED_2
#define LEDS_ACTIVE_STATE 1
#define LEDS_LIST { LED_1, LED_2 }
#define LEDS_INV_MASK LEDS_MASK
#define BSP_LED_0 7
#define BSP_LED_1 7
#define BUTTONS_NUMBER 1
#define BUTTON_1 13
#define BUTTON_2
#define BUTTON_PULL NRF_GPIO_PIN_PULLUP
#define BUTTONS_ACTIVE_STATE 0
#define BUTTONS_LIST { BUTTON_1 }
#define BSP_BUTTON_0 BUTTON_1
#define RX_PIN_NUMBER 15
#define TX_PIN_NUMBER 17
#define CTS_PIN_NUMBER 19
#define RTS_PIN_NUMBER 20
#define HWFC false
#define BSP_QSPI_SCK_PIN 19
#define BSP_QSPI_CSN_PIN 9
#define BSP_QSPI_IO0_PIN 20
#define BSP_QSPI_IO1_PIN 21
#define BSP_QSPI_IO2_PIN 22
#define BSP_QSPI_IO3_PIN 23
// serialization APPLICATION board - temp. setup for running serialized MEMU tests
#define SER_APP_RX_PIN NRF_GPIO_PIN_MAP(0, 15) // UART RX pin number.
#define SER_APP_TX_PIN NRF_GPIO_PIN_MAP(0, 17) // UART TX pin number.
#define SER_APP_CTS_PIN NRF_GPIO_PIN_MAP(0, 19) // UART Clear To Send pin number.
#define SER_APP_RTS_PIN NRF_GPIO_PIN_MAP(0, 20) // UART Request To Send pin number.
#define SER_APP_SPIM0_SCK_PIN NRF_GPIO_PIN_MAP(0,30) // SPI clock GPIO pin number.
#define SER_APP_SPIM0_MOSI_PIN NRF_GPIO_PIN_MAP(0,3) // SPI Master Out Slave In GPIO pin number
#define SER_APP_SPIM0_MISO_PIN NRF_GPIO_PIN_MAP(0,31) // SPI Master In Slave Out GPIO pin number
#define SER_APP_SPIM0_SS_PIN NRF_GPIO_PIN_MAP(1,2) // SPI Slave Select GPIO pin number
#define SER_APP_SPIM0_RDY_PIN NRF_GPIO_PIN_MAP(1,15) // SPI READY GPIO pin number
#define SER_APP_SPIM0_REQ_PIN NRF_GPIO_PIN_MAP(1,14) // SPI REQUEST GPIO pin number
// serialization CONNECTIVITY board
#define SER_CON_RX_PIN NRF_GPIO_PIN_MAP(1,14) // UART RX pin number.
#define SER_CON_TX_PIN NRF_GPIO_PIN_MAP(1,13) // UART TX pin number.
#define SER_CON_CTS_PIN NRF_GPIO_PIN_MAP(1,15) // UART Clear To Send pin number. Not used if HWFC is set to false.
#define SER_CON_RTS_PIN NRF_GPIO_PIN_MAP(0,2) // UART Request To Send pin number. Not used if HWFC is set to false.
#define SER_CON_SPIS_SCK_PIN NRF_GPIO_PIN_MAP(0,27) // SPI SCK signal.
#define SER_CON_SPIS_MOSI_PIN NRF_GPIO_PIN_MAP(0,2) // SPI MOSI signal.
#define SER_CON_SPIS_MISO_PIN NRF_GPIO_PIN_MAP(0,26) // SPI MISO signal.
#define SER_CON_SPIS_CSN_PIN NRF_GPIO_PIN_MAP(1,13) // SPI CSN signal.
#define SER_CON_SPIS_RDY_PIN NRF_GPIO_PIN_MAP(1,15) // SPI READY GPIO pin number.
#define SER_CON_SPIS_REQ_PIN NRF_GPIO_PIN_MAP(1,14) // SPI REQUEST GPIO pin number.
#define SER_CONN_CHIP_RESET_PIN NRF_GPIO_PIN_MAP(1,1) // Pin used to reset connectivity chip
// Arduino board mappings
#define ARDUINO_SCL_PIN 11 // SCL signal pin
#define ARDUINO_SDA_PIN 8 // SDA signal pin
#define ARDUINO_AREF_PIN 2 // Aref pin
#define ARDUINO_13_PIN NRF_GPIO_PIN_MAP(0, 2) // Digital pin 13
#define ARDUINO_12_PIN NRF_GPIO_PIN_MAP(0, 3) // Digital pin 12
#define ARDUINO_11_PIN NRF_GPIO_PIN_MAP(0, 31) // Digital pin 11
#define ARDUINO_10_PIN NRF_GPIO_PIN_MAP(0, 30) // Digital pin 10
#define ARDUINO_9_PIN NRF_GPIO_PIN_MAP(0, 10) // Digital pin 9
#define ARDUINO_8_PIN NRF_GPIO_PIN_MAP(0, 9) // Digital pin 8
#define ARDUINO_7_PIN NRF_GPIO_PIN_MAP(0, 23) // Digital pin 7
#define ARDUINO_6_PIN NRF_GPIO_PIN_MAP(0, 22) // Digital pin 6
#define ARDUINO_5_PIN NRF_GPIO_PIN_MAP(0, 21) // Digital pin 5
#define ARDUINO_4_PIN NRF_GPIO_PIN_MAP(0, 20) // Digital pin 4
#define ARDUINO_3_PIN NRF_GPIO_PIN_MAP(0, 19) // Digital pin 3
#define ARDUINO_2_PIN NRF_GPIO_PIN_MAP(1, 3) // Digital pin 2
#define ARDUINO_1_PIN NRF_GPIO_PIN_MAP(0, 15) // Digital pin 1
#define ARDUINO_0_PIN NRF_GPIO_PIN_MAP(0,17) // Digital pin 0
#define ARDUINO_A0_PIN 29 // Analog channel 0
#define ARDUINO_A1_PIN 28 // Analog channel 1
#define ARDUINO_A2_PIN 5 // Analog channel 2
#define ARDUINO_A3_PIN 4 // Analog channel 3
#define ARDUINO_A4_PIN 2 // Analog channel 4
#define ARDUINO_A5_PIN 3 // Analog channel 5
#ifdef __cplusplus
}
#endif
#endif // PCA10056_H