Carrier board for the flexible grayscale OLED display
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
Datasheets
Firmware
Hardware
.gitattributes
.gitignore
README.md

README.md

SparkFun Carrier Board for Flexible Grayscale OLED Display

SparkFun Flexible Grayscale Carrier Board

SparkFun Flexible Grayscale Display - 1.81" (SPX-14543)

This is a small flexible, grayscale OLED display. That’s right, we said flexible. We’ve been hearing about flexible displays for years, it’s finally here! You can’t fold it like paper but this OLED from Wisechip can be bent to a 40mm radius without damage. The display is than 0.5mm thick, less than 0.5 grams, and can display some impressive graphics with great contrast.

The carrier board generates the 12V required to drive the OLED display. The carrier board also has a signal buffer so that you can drive the display from any 3.3V or 5V microcontroller. However, because of the nature of the TXB0104 you must power the board with 3.5V or more. Your microcontroller can be 3.3V or 5V but we recommend you power the carrier board with 5V.

Repository Contents

  • /Hardware - Eagle design files (.brd, .sch)

Library

License Information

This product is open source!

Please review the LICENSE.md file for license information.

If you have any questions or concerns on licensing, please contact techsupport@sparkfun.com.

Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anyThing Development Board derivative under the same license.

Distributed as-is; no warranty is given.

  • Your friends at SparkFun.