Skip to content
xCORE VocalFusion Raspberry Pi Setup for codama
C Python Shell Makefile
Branch: codama
Clone or download
Pull request Compare This branch is 6 commits ahead, 19 commits behind xmos:master.
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
i2c-gpio-param
loader
resources Add support codama device Mar 13, 2019
.gitignore
CHANGELOG.md
README.md
setup.sh

README.md

xCORE VocalFusion Raspberry Pi Setup for codama

This repository is fork from https://github.com/xmos/vocalfusion-rpi-setup Add Custom for codama board. codama is http://codama.ux-xu.com

This repository provides a simple-to-use automated script to configure the Raspberry Pi to use xCORE VocalFusion for audio.

Note: This repository is designed for use within the following xCORE VocalFusion repositories:

Setup

  1. Install Raspbian Stretch or Raspbian Buster on the Raspberry Pi.

  2. Update kernel package version.

    sudo apt-get update
    sudo apt-get upgrade
    

    followed by a reboot.

  3. Clone the Github repository https://github.com/srchack/vocalfusion-rpi-setup:

    git clone https://github.com/srchack/vocalfusion-rpi-setup

  4. For codama device, run the installation script as follows:

    ./setup.sh codama

    For VocalFusion devices, run the installation script as follows:

    ./setup.sh vocalfusion

    For VocalFusion Stereo devices, run the installation script as follows:

    ./setup.sh

    For XVF3510 devices, run the installation script as follows:

    ./setup.sh xvf3510

    Wait for the script to complete the installation. This can take several minutes.

  5. Reboot the Raspberry Pi.

You can’t perform that action at this time.