# Config file for Benetel RANx50 radio units
# Please place this file in /etc

# MIMO mode - the radio can operate in 1_3, 2_4, 1_2_3_4_4x2 or 1_2_3_4_4x4 mode
# Variable name : mimo_mode
# Valid options : 1_3
#                 2_4
#                 1_2_3_4_4x2
#                 1_2_3_4_4x4
mimo_mode=1_2_3_4_4x2

# FPGA downlink scaling in steps of 6 dB (0, 6, 12 and 18 can be set)
# Variable name : downlink_scaling
# Valid options : 0
#                 6
#                 12
#                 18
downlink_scaling=0

# PRACH format
# Variable name : prach_format
# Valid options : short
#                 long
prach_format=short

# Short form PRACH compression settings (note uncompressed mode is not supported when RU is in 4x2 or 4x4 mode)
# Variable name : compression
# Valid options : static_uncompressed
#                 dynamic_uncompressed
#                 static_compressed
#                 dynamic_compressed
compression=dynamic_compressed

# Long form PRACH compression settings
# Variable name : lf_prach_compression_enable
# Valid options : true
#                 false
lf_prach_compression_enable=false

# C-Plane per-symbol workaround
# Variable name : cplane_per_symbol_workaround
# Valid options : enabled
#                 disabled
cplane_per_symbol_workaround=disabled

# CUPLANE dl couplling sectionID
# Variable name : cuplane_dl_coupling_sectionId
# Valid options : enabled
#                 disabled
cuplane_dl_coupling_sectionID=disabled

# FlexRAN PRACH workaround
# Variable name : flexran_prach_workaround
# Valid options : enabled
#                 disabled
flexran_prach_workaround=disabled

#DL_UL special slot tunning
#Variable name : dl_ul_tuning_special_slot
#Valid options : 0x0
#                0xfd00000
dl_ul_tuning_special_slot=0xfd00000