gnb_id: 1 amf: addr: 192.168.20.100 # The address or hostname of the AMF. addr: 127.0.0.5 # The address or hostname of the AMF. ru_ofh: t1a_max_cp_dl: 500 t1a_min_cp_dl: 258 t1a_max_cp_ul: 465 t1a_min_cp_ul: 285 t1a_max_up: 250 t1a_min_up: 50 ta4_max: 200 # Maximum Ta4 on User-Plane in microseconds. ta4_min: 0 is_prach_cp_enabled: true is_dl_broadcast_enabled: true compr_method_ul: bfp compr_bitwidth_ul: 9 compr_method_dl: bfp compr_bitwidth_dl: 9 compr_method_prach: bfp compr_bitwidth_prach: 9 enable_ul_static_compr_hdr: false enable_dl_static_compr_hdr: false iq_scaling: 4.5 cells: - network_interface: 0000:01:00.1 # - network_interface: enp1s0f1 ru_mac_addr: 70:b3:d5:e1:5c:89 du_mac_addr: 80:61:5f:0d:df:ab vlan_tag: 5 prach_port_id: [4,5] dl_port_id: [0,1] ul_port_id: [0,1] hal: eal_args: "--lcores (0-1)@(0-15)" cell_cfg: dl_arfcn: 640000 band: 78 # The NR band. channel_bandwidth_MHz: 20 # Bandwith in MHz. Number of PRBs will be automatically derived. common_scs: 30 # Subcarrier spacing in kHz used for data. plmn: "00101" # PLMN broadcasted by the gNB. tac: 7 # Tracking area code (needs to match the core configuration). pci: 1 # Physical cell ID. nof_antennas_dl: 2 nof_antennas_ul: 2 prach: prach_config_index: 159 prach_root_sequence_index: 1 zero_correlation_zone: 0 prach_frequency_start: 2 tdd_ul_dl_cfg: dl_ul_tx_period: 10 # Optional INT (10). Sets the TDD pattern periodicity in slots. The combination of this value and the chosen numerology must lead to a TDD periodicity of 0.5, > nof_dl_slots: 7 # Optional INT (6). Number of consecutive full Downlink slots. Supported: [0-80]. nof_dl_symbols: 6 # Optional INT (0). Number of Downlink symbols at the beginning of the slot following full Downlink slots. Supported: [0-13]. nof_ul_slots: 2 # Optional INT (3). Number of consecutive full Uplink slots. Supported: [0 - 80]. nof_ul_symbols: 4 ssb: ssb_period: 20 pdsch: mcs_table: qam256 log: filename: /tmp/gnb.log # Path of the log file. all_level: warning ofh_level: info #pcap: # mac_enable: false # Set to true to enable MAC-layer PCAPs. # mac_filename: /tmp/gnb_mac.pcap # Path where the MAC PCAP is stored. # ngap_enable: true # Set to true to enable NGAP PCAPs. # ngap_filename: /tmp/gnb_ngap.pcap # Path where the NGAP PCAP is stored. # f1ap_enable: true # e1ap_enable: true expert_execution: affinities: # isolated_cpus: 1-7,9-15 # threads: # upper_phy: # nof_ul_threads: 2 # nof_pusch_decoder_threads: 2 # nof_pdsch_threads: 8 # nof_dl_threads: 3 # ofh: # enable_dl_parallelization: true #expert_phy: # max_proc_delay: 5 #