Skip to content
LG Download Mode utility and documentation
Python Lua
Branch: g4-stable
Clone or download
Pull request Compare This branch is 89 commits ahead, 32 commits behind Lekensteyn:master.
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
info
rules.d
scripts
.gitignore
LICENSE
README.md
auth.py
dump-file.py
extract-partitions.py
gpt.py
laf_crypto.py
lglaf.lua
lglaf.py
partitions.py
protocol.md
send-file.py

README.md

LGLAF.py

LGLAF.py is a utility for communication with LG devices in Download Mode. This allows you to execute arbitrary shell commands on a LG phone as root.

Contents of this repository:

  • auth.py - challenge/response on newer devices (see below).
  • lglaf.py - main script for communication (see below).
  • partitions.py - manage (list / read / write) partitions.
  • extract-partitions.py - Dump all partitions (convenience script that uses partitions.py under the hood). By default the largest partitions (system, cache, cust, userdata) are not dumped though. This can be changed with the --max-size option.
  • dump-file.py - dumps a regular file from device.
  • protocol.md - Protocol documentation.
  • lglaf.lua - Wireshark dissector for LG LAF protocol.
  • scripts/ - Miscellaneous scripts.

Requirements

LGLAF.py depends on:

On Linux, you must also install rules.d/42-usb-lglaf.rules to /etc/udev/rules.d/ in order to give the regular user access to the USB device.

Tested with:

  • LG G3 (D855) on 64-bit Arch Linux (Python 3.5.1, pyusb 1.0.0b2, libusb 1.0.20)
  • LG G3 (D855) on 32-bit Windows XP (Python 3.4.4, LG drivers).
  • LG G2 (VS985).
  • LG G4 (VS986) on Linux (Python 3.5) and Windows.
  • LG G4 (H810,H811,H812,H815) on 64 bit Arch Linux | FWUL (Python 2.7.13, pyusb 1.0.0-5, libusb 1.0.21-2)

Usage

This tool provides an interactive shell where you can execute commands in Download Mode. To enter this mode:

  1. Power off the phone.
  2. Connect the phone to a computer using a USB cable.
  3. Press and hold Volume up.
  4. Briefly press the power button.
  5. Wait for the Download mode screen to appear.
  6. Release keys. You should now see a Firmware Update screen.

Now you can issue commands using the interactive shell:

(venv)[peter@al lglaf]$ python lglaf.py
LGLAF.py by Peter Wu (https://lekensteyn.nl/lglaf)
Type a shell command to execute or "exit" to leave.
# pwd
/
# uname -a
-: uname: not found
# cat /proc/version
Linux version 3.4.0-perf-gf95c7ee (lgmobile@LGEARND12B2) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Aug 18 19:25:04 KST 2015
# exit

Some devices require a challenge/response before communication is possible (only needed once after entering download mode):

(venv)[peter@al lglaf]$ python auth.py --debug
LGLAF.py: DEBUG: Using endpoints 83 (IN), 02 (OUT)
auth: DEBUG: Challenge: c4:af:ff:aa
auth: DEBUG: Response: 12:7a:c2:c2:87:0e:06:5d:a2:a4:c3:8c:a2:12:12:12

When commands are piped to stdin (or given via -c), the prompt is hidden:

(venv)[peter@al lglaf]$ echo mount | python lglaf.py
rootfs / rootfs rw 0 0
tmpfs /dev tmpfs rw,seclabel,nosuid,relatime,size=927232k,nr_inodes=87041,mode=755 0 0
devpts /dev/pts devpts rw,seclabel,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,seclabel,relatime 0 0
selinuxfs /sys/fs/selinux selinuxfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
/dev/block/platform/msm_sdcc.1/by-name/system /system ext4 ro,seclabel,noatime,data=ordered 0 0
/dev/block/platform/msm_sdcc.1/by-name/userdata /data ext4 rw,seclabel,nosuid,nodev,noatime,noauto_da_alloc,resuid=1000,errors=continue,data=ordered 0 0
/dev/block/platform/msm_sdcc.1/by-name/persist /persist ext4 ro,seclabel,nosuid,nodev,relatime,data=ordered 0 0
/dev/block/platform/msm_sdcc.1/by-name/cache /cache ext4 rw,seclabel,nosuid,nodev,noatime,data=ordered 0 0
(venv)[peter@al lglaf]$ python lglaf.py -c date
Thu Jan  1 01:30:06 GMT 1970
(venv)[peter@al lglaf]$

Advanced usage

If you know the protocol, you can send commands directly. Each request has a command, zero to four arguments and possibly a body. The lglaf.py tool accepts this command:

![command] [arguments] [body]

All of these words accept escape sequences such as \0 (octal escape), \x00 (hex), \n, \r and \t. The command must be exactly four bytes, the arguments and body are optional.

Arguments are comma-separated and must either be four-byte sequences (such as \0\1\2\3) or numbers (such as 0x03020100). If no arguments are given, but a body is needed, keep two spaces between the command and argument.

Reboot device (command CTRL, arg1 RSET, no body):

$ ./lglaf.py  --debug -c '!CTRL RSET'
LGLAF.py: DEBUG: Hello done, proceeding with commands
LGLAF.py: DEBUG: Header: b'CTRL' b'RSET' b'\0\0\0\0' b'\0\0\0\0' b'\0\0\0\0' b'\0\0\0\0' b'\xc7\xeb\0\0' b'\xbc\xab\xad\xb3'

Execute a shell command (command EXEC, no args, with body):

$ ./lglaf.py --debug --skip-hello -c '!EXEC  id\0'
LGLAF.py: DEBUG: Header: b'EXEC' b'\0\0\0\0' b'\0\0\0\0' b'\0\0\0\0' b'\0\0\0\0' b'/\0\0\0' b'\x8dK\0\0' b'\xba\xa7\xba\xbc'
uid=0(root) gid=0(root) context=u:r:toolbox:s0

License

See the LICENSE file for the license (MIT).

You can’t perform that action at this time.