Skip to content
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
43 lines (42 sloc) 3.38 KB
IP address of Raspberry Pi WebIP,
Port used for Web interface WebPort,4102
IP Address of 1st Max Cube MaxIP,
IP Address of 2nd Max Cube MaxIP2,
Port used on MAX Cube MaxPort,62910
IP Address of Vera Home automation box VeraIP,
Port used by Vera VeraPort,3480
Device number of Boiler switch in Vera Device,92
This is a 433MHz Mysensor switch
Vera command to switch device (boiler) on / off VeraControl,http://{}:{}/data_request?id=lu_action&output_format=xml&DeviceNum={}&serviceId=urn:upnp-org:serviceId:SwitchPower1&action=SetTarget&newTargetValue={}
Vera command to get state of boiler device VeraGetData,http://{}:{}/data_request?id=variableget&DeviceNum={}&serviceId={}&Variable={}
Device number of outside Temp sensor VeraOutsideTempID,112
Vera device type for Temp sensor VeraOutsideTempService,urn:upnp-org:serviceId:TemperatureSensor1
Use vera temperature 1=yes 0=no VeraTemp,1
if 0 will get temp from OpenWeathermaps
Allow change Boiler state BoilerEnabled,1
Disable boiler by clicking Boiler Enable on Web interface.
Interval time to check valves (seconds) Interval,135
Max cube is ok, updated by system CubeOK,1
Cube 1 or 2 in use, updated by system ActiveCube,1
Vera is OK, updated by system VeraOK,0
Turns on/off some debugging PrintData,0
How often the web interface auto updates (seconds) PageRefresh,67
How open one valve must be to turn on heating SingleRadThreshold,78
How open multiple valves must be for heating MultiRadThreshold,60
Number of valves that must be above threshold MultiRadCount,2
If all valve values added are above this heat on AllValveTotal,120
Openweathermap API key, get an account WeatherKey,713951e4ce6xxxxxxxxxb7a10b88f63
Openweathermap your city ID. WeatherCityID,6640068
HTML for weather widget, update with your details. WeatherWidget, Circle Westhill&units=uk
Size of font on web interface. BaseFontSize,3
level of logging that is saved in log files LoggingLevel,INFO
Used to enable a relay on ESP8266 board. ManualHeatingSwitch,1
Use an ESP8266 attached neopixel display. UseNeoPixel,1
If boiler locked On or OFF, updated by system. BoilerOverride,2
Used to calculate if MAX has failed, maybe.. ExpectedNoOfRooms,5
Updated by system from above. RoomsCorrect,0
Enable Vera virtual temperature updates. VeraVirtualTemps,1
Vera Temp sensor with no actual hardware.
MAX room name and Vera Device number to sync. VeraVirtualRooms,{'Bedroom 2':103; 'Bedroom 1':135; 'Dining-Extension':139; 'Living Room':157}
Vera command to update virtual temps. VeraUpdateTemps,{}&serviceId=urn:upnp-org:serviceId:TemperatureSensor1&Variable=CurrentTemperature&Value={}
I had problems creating the command so got lazy and hard coded the address.
You can’t perform that action at this time.