D Taylor stg

  • Joined on
stg commented on issue synthetos/g2#65
@stg

First of all I am using Chilipeppr and hence only a single channel and I do understand the shortcomings of this and why an additional port is a goo…

stg commented on issue synthetos/g2#65
@stg

Great work, 81.07 runs beautifully! Feed-hold still causes problems here, but it doesn't matter as I need not use it - but if I do I typically have…

stg commented on issue synthetos/g2#65
@stg

I saw you had done some commits and have been dying to get to my workshop ever since to try it out :) Will be trying this out today.

@stg
stg created branch master at devsound/udad_swd
stg created repository devsound/udad_swd
stg opened issue synthetos/g2#66
@stg
Question regarding step pulses
stg commented on issue synthetos/g2#57
@stg

If I may insert a thought... While flash endurance is typically pretty low (can't seem to find an exact number for the SAM3 series) I've avoided is…

stg commented on issue synthetos/g2#65
@stg

I believe the USB issue is a combination of issue #41 combined with Windows sometimes strange handling of USB serial ports. I've seen this before w…

stg commented on issue synthetos/g2#65
@stg

Thanks Ryan, I've read through that post and it is likely related - however I don't just get aborted arcs - I get all sorts of crazy moves. Yesterd…

stg commented on issue synthetos/g2#65
@stg

Ok, let's consider it a local issue and I will troubleshoot on my end. I have not tried Coolterm, but will certainly do that. Tera term has been wo…

stg commented on issue synthetos/g2#65
@stg

That is lovely news! Thanks, I will try some things first (like IJ instead of R), but if I can't get it working, I'll rewrite it to G1's instead of…

stg commented on issue synthetos/g2#65
@stg

Erratic motion problems seem related to arcs. The following code gives erratic motion on edge, but works just fine on master: (Drill cycle, 2mm hol…

stg opened issue synthetos/g2#65
@stg
Erratic motion output and crashing USB serial ports
stg commented on issue stg/SYLT-FFT#1
@stg

Thank you for writing me, this is exactly the sort of thing that makes one happy after releasing free code. Your project seems very useful and impo…

stg commented on issue synthetos/TinyG#130
@stg

Seeing as I'm quite excited about, and impressed with, this project as well as having a dire need to replace the hardware and software of both my C…

stg opened issue synthetos/TinyG#130
@stg
PWM related to speed
stg commented on issue stg/SYLT-FFT#1
@stg

Sure! Let me know if there is anything I can try and help explain. Yes, that is I - Intermittent paranoia keeps me using the odd pseudonym here and…

stg commented on issue stg/SYLT-FFT#1
@stg

Did find the time and it does work and I came up with the following code to demonstrate the faster version using real data only (test_fast). This i…

stg commented on issue stg/SYLT-FFT#1
@stg

Hey again, This looks good at first glance, might find some time today to test it out and make sure. Using your absolute values is not a problem - …

stg commented on issue stg/SYLT-FFT#1
@stg

A colleague has got me thinking about using a digital band-pass Sure, this is a possibility, and it may be faster if you are only looking to chec…

stg commented on issue stg/SYLT-FFT#1
@stg

I have never done much practical digital signal processing Tell me about it, I had never done DSP until finding myself in a situation needing to …

stg pushed to master at stg/SYLT-FFT
@stg
stg commented on issue stg/SYLT-FFT#1
@stg

I understand and sincerely hope this will prove useful for your project. If there is anything I can do to help with usage/implementation, anything …

stg commented on issue stg/SYLT-FFT#1
@stg

Oh, and main.c was, as specified in the first line, is written for benchmarking on the FRDM-K20D50M board. If you wish to benchmark on another plat…

stg commented on issue stg/SYLT-FFT#1
@stg

This code was designed for Cortex-M4 and you should get errors trying to compile on M3. The fallback snippets in C are heaps slower than the intrin…