The __udiv_qrnnd primitive that we nicked from gmp requires its
inputs to be normalized.  We were not doing that.  Because the
inputs are nearly normalized already, finishing that is trivial.
Inline div128to64 into its one user, because it is no longer a
general-purpose routine.

Fixes: cf07323
Fixes: https://bugs.launchpad.net/qemu/+bug/1793119
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Based on z2.c test from rth

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Not all test results will be the same size as the inputs. Define this
information as part of the test description.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

We are going to re-use these helper functions in other tests.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Expand the runner to support a simple two-op test.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

TCG tests typically want to test a range of inputs against a known
fragment of code. To do this with a lowest amount of boilerplate this
test introduces some test-ops.h structures which are intended to be
used for multiple tests. The multiarch op-test is an example using
this framework and can be extended with additional tests that can be
written in pure C. Additional architecture specific tests should be
added there.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

The .gitignore is yet again being a little too over enthusiastic.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

By leveraging berkeley's softfloat and testfloat.

With this we get decent coverage of softfloat.c:

$ ./fp-test -r even:	67.22% coverage
$ ./fp-test -r all:	73.11% coverage

Note that we do not yet test parts of softfloat.c that aren't
in the original softfloat library, namely:

- denormal inputs
- *_to_int16/uint16 conversions
- scalbn for fixed point
- muladd variants
- min/max
- exp2
- log2
- float*_compare (except float16_compare)

Signed-off-by: Emilio G. Cota <cota@braap.org>

These are BSD-licensed so we can add them as submodules.

Signed-off-by: Emilio G. Cota <cota@braap.org>

It has not had users since f83311e ("target-m68k: use floatx80
internally", 2017-06-21).

Note that no other bit-width has floatX_trunc_to_int.

Signed-off-by: Emilio G. Cota <cota@braap.org>

…equest' into staging

usb: fixes for mtp, hub and ohci.

# gpg: Signature made Mon 01 Oct 2018 10:28:36 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20181001-pull-request:
  ohci: set effectively usb frame rate to 1kHz
  usb-hub: clear suspend on detach
  usb-mtp: reset ObjectInfo dataset size on cleanup
  doc: replace x-root with rootdir for usb-mtp
  usb-mtp: fix error conditions for write operation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

…equest' into staging

vga: add edid support, qxl bugfixes.

# gpg: Signature made Thu 27 Sep 2018 08:12:32 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180927-pull-request:
  qxl: support mono cursors with inverted colors
  qxl: use guest_monitor_config for local renderer.
  display/stdvga: add edid support.
  display/edid: add DEFINE_EDID_PROPERTIES
  display/edid: add region helper.
  display/edid: add qemu_edid_size()
  display/edid: add edid generator to qemu.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

USB frame rate is slightly lower than 1kHz: ie. ~950Hz.
Thus usb-audio device is not able to perform a simple audio playback
without underruns on audio backend.
eg. "-device pci-ohci,id=ohci -device usb-audio,bus=ohci.0" vs PulseAudio
backend. more than 50 underruns are observed per second.

Update ohci_sof_time computation, using QEMU_CLOCK_VIRTUAL in
ohci_usb_start(), and increment by usb_frame_time in ohci_sof()
makes USB frame rate close to 1kHz.
This way, no audio underrun are observed during audio playback.

Signed-off-by: Miguel GAIO <mgaio35@gmail.com>
Message-Id: <20180927151936.3647-1-mgaio35@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180912114012.6034-1-kraxel@redhat.com

Stale values in this field may result in qemu
expecting more data on the next operation

Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180907220851.9658-4-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Signed-off-by: Bandan <bsd@redhat.com>
Message-id: 20180907220851.9658-3-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Return STORE_FULL if we can't write all the bytes but
return incomplete transfer if data received is less then
what was specified in the metadata. Also, use d->offset
as the file size which is valid for all file sizes.

Signed-off-by: Bandan <bsd@redhat.com>
Message-id: 20180907220851.9658-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

… into staging

nbd patches for 2018-09-26

Fixes for external clients; add reminder to revisit naming of x- command

- Vladimir Sementsov-Ogievskiy: nbd/server: send more than one extent of base:allocation context
- John Snow: qapi: bitmap-merge: document name change
- Vladimir Sementsov-Ogievskiy: nbd/server: fix bitmap export

# gpg: Signature made Thu 27 Sep 2018 03:40:03 BST
# gpg:                using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg:                 aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2018-09-26:
  nbd/server: send more than one extent of base:allocation context
  qapi: bitmap-merge: document name change
  nbd/server: fix bitmap export

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

…o staging

Queued tcg patches

# gpg: Signature made Wed 26 Sep 2018 19:27:22 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20180926:
  tcg/i386: fix vector operations on 32-bit hosts
  qht-bench: add -p flag to precompute hash values
  qht: constify arguments to some internal functions
  qht: constify qht_statistics_init
  qht: constify qht_lookup
  qht: fix comment in qht_bucket_remove_entry
  qht: drop ht argument from qht iterators
  test-qht: speed up + test qht_resize
  test-qht: test deletion of the last entry in a bucket
  test-qht: test removal of non-existent entries
  test-qht: test qht_iter_remove
  qht: add qht_iter_remove
  qht: remove unused map param from qht_remove__locked

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

…180926a' into staging

Migration pull 2018-09-26

This supercedes Juan's pull from the 13th

# gpg: Signature made Wed 26 Sep 2018 18:07:30 BST
# gpg:                using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20180926a:
  migration/ram.c: Avoid taking address of fields in packed MultiFDInit_t struct
  migration: fix the compression code
  migration: fix QEMUFile leak
  tests/migration: Speed up the test on ppc64
  migration: cleanup in error paths in loadvm
  migration/postcopy: Clear have_listen_thread
  tests/migration: Add migration-test header file
  tests/migration: Support cross compilation in generating boot header file
  tests/migration: Convert x86 boot block compilation script into Makefile
  migration: use save_page_use_compression in flush_compressed_data
  migration: show the statistics of compression
  migration: do not flush_compressed_data at the end of iteration
  Add a hint message to loadvm and exits on failure
  migration: handle the error condition properly
  migration: fix calculating xbzrle_counters.cache_miss_rate
  migration/rdma: Fix uninitialised rdma_return_path

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

…6' into staging

pull-seccomp-20180926

# gpg: Signature made Wed 26 Sep 2018 14:20:06 BST
# gpg:                using RSA key DF32E7C0F0FFF9A2
# gpg: Good signature from "Eduardo Otubo (Senior Software Engineer) <otubo@redhat.com>"
# Primary key fingerprint: D67E 1B50 9374 86B4 0723  DBAB DF32 E7C0 F0FF F9A2

* remotes/otubo/tags/pull-seccomp-20180926:
  seccomp: check TSYNC host capability

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

… into staging

Block and testing patches

- Paolo's AIO fixes.
- VMDK streamOptimized corner case fix
- VM testing improvment on -cpu

# gpg: Signature made Wed 26 Sep 2018 03:54:08 BST
# gpg:                using RSA key CA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/staging-pull-request:
  vmdk: align end of file to a sector boundary
  tests/vm: Use -cpu max rather than -cpu host
  aio-posix: do skip system call if ctx->notifier polling succeeds
  aio-posix: compute timeout before polling
  aio-posix: fix concurrent access to poll_disable_cnt

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

…-pull-request' into staging

- some fixes for setrlimit() and write()
- fixes ELF loader when host page size is greater than target page size
- add SO_LINGER to getsockopt()/setsockopt()
- move TargetFdTrans from syscall.c
  v2: add "#include <linux/netlink.h>" in linux-user/fd-trans.c

# gpg: Signature made Tue 25 Sep 2018 21:51:13 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
  linux-user: do setrlimit selectively
  linux-user: write(fd, NULL, 0) parity with linux's treatment of same
  linux-user: elf: mmap all the target-pages of hostpage for data segment
  linux-user: add SO_LINGER to {g,s}etsockopt
  linux-user: move TargetFdTrans functions to their own file

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Monochrome cursors are still used by Windows guests with the
QXL-WDDM-DOD driver. Such cursor types have one odd feature, inversion
of colors. GDK does not seem to support it, so implement an alternative
solution: fill the inverted pixels and add an outline to make the cursor
more visible. Tested with the text cursor in Notepad and Windows 10.

cursor_set_mono is also used by the vmware GPU, so add a special check
to avoid breaking its 32bpp format (tested with Kubuntu 14.04.4). I was
unable to find a guest which supports the 1bpp format with a vmware GPU.

The old implementation was buggy and removed in v2.10.0-108-g79c5a10cdd
("qxl: drop mono cursor support"), this version improves upon that by
adding bounds validation, clarifying the semantics of the two masks and
adds a workaround for inverted colors support.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1611984
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-id: 20180903145447.17142-1-peter@lekensteyn.nl

[ kraxel: minor codestyle fix ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

When processing monitor config from guest store head0 width and height
for single-head configurations.  Use these when creating the
DisplaySurface in the local renderer.

This fixes a rendering issue with wayland.  Wayland rounds up the
framebuffer width and height to a multiple of 64, so with odd
resolutions (800x600 for example) the framebuffer is larger than the
actual screen.  The monitor config has the actual screen size though.

This fixes guest display for anything using the local renderer
(non-spice UI, screendump monitor command).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180919103057.9666-1-kraxel@redhat.com

This patch adds edid support to the qemu stdvga.  It is turned off by
default and can be enabled with the new edid property.  The patch also
adds xres and yres properties to specify the video mode you want the
guest use.  Works only with edid enabled and updated guest driver.

The mmio bar of the stdvga has some unused address space at the start.
It was reserved just in case it'll be needed for virtio, but it turned
out to not be needed for that.  So let's use that region to place the
EDID data block there.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-6-kraxel@redhat.com

Add a define for edid monitor properties.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-5-kraxel@redhat.com