Skip to content
Compare
Choose a tag to compare

UnifingerUI v5.8.0 has new features below

  1. SFM SDK v3.3.0 included.

  2. 64-bit execution file supported.

  3. Secure packet protocol supported.

image

  • If you checked the box, packet communication will be secured. (SFM6000 / Slim series only. Also, supported since FW v3.6 )
  • All of the packets are encrypted as shown below. (Packet Trace dialog)

image

  • Please refer to the SFM Series Protocol Manual v3.6.0 for details.
  1. Additional encryption modes have been added.

image

  1. Additional system parameter has been added. (Packet Security)

image

  • If this option is turned on while you use the secure packet protocol, almost of commands are blocked with an insecure packet.
Compare
Choose a tag to compare
  1. LFD Version has been added to the system parameter view. Also, Kernel Identifier has been renamed as Kernel Version.

image

  1. Read Image button and Disconnect button have been added to the main view of the Unifinger UI.

image

  1. SDK version is represented with the application title. UnifingerUI v5.7.2 is working with SFM SDK v3.2.2.
Compare
Choose a tag to compare
  1. A problem that Bootloader Upgrade mode is not worked on Windows10 has been resolved. (only for the SFM3000/4000/5000/5500 series)

  2. A problem showing "unsupported error" on the system parameter menu with SFMSlim v3.5.0 with previously released kernels has been resolved ( SFMSlim firmware v3.5.0 with previously released kernels returns the "unsupported error" from KVID )

48c60a5
Compare
Choose a tag to compare

Updates

  1. The newest version of SFM SDK (ver. 3.2.0) has been adopted.

  2. Serial Ports (Com Ports) that are connected with your PC only automatically shown in the "Communication Setup Dialog". You can select one of the port which is connected with the SFM.
    image

  3. Firmware Validation has been added under the "Upgrade" menu. (only supports since firmware v2.3 of the SFM50x0, SFM55x0 series)
    If you try to upgrade the wrong file which is not of the SFM firmware after checking the box, the module does not upgrade the file. And the UnifingerUI shows the error of "Invalid firmware" like below.
    image

  4. Kernel Identifier has been added under the "System" menu. (only supports for SFM60x0 and SFMSlim)
    image

  5. Minor bugs fixed.

797f32f
Compare
Choose a tag to compare

Updates

  1. The timestamp has been added to the packet trace dialog.
    image

  2. DFU button has been added to the upgrade menu.
    image
    (for SFM60x0 only)

  3. A system parameter option of the touch sensitivity has been added to the system parameter menu.
    image
    (for SFMSlim only)

  4. SFM60x0 and Slim series correctly get the response command of the upgrade result.

  5. A link to the SFM developer center (website) has been added to the help menu.
    image

  6. The main logo has been changed.

  7. The layout has been modified.

  8. Minor bugs fixed.

9c83fcc
Compare
Choose a tag to compare