Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP

Comparing changes

Choose two branches to see what's changed or to start a new pull request. If you need to, you can also compare across forks.

Open a pull request

Create a new pull request by comparing changes across two branches. If you need to, you can also compare across forks.
base fork: sutajiokousagi/linux
base: kovan
...
head fork: kipr/linux
compare: cb20c75d6f17c5bbd30c01e44a462bcfe29a0d79
Checking mergeability… Don't worry, you can still create the pull request.
  • 6 commits
  • 7 files changed
  • 0 commit comments
  • 1 contributor
View
5 .gitignore
@@ -32,6 +32,11 @@ modules.builtin
*.gcno
#
+# Kernel config file: defconfig (AKA .config)
+#
+defconfig
+
+#
# Top-level generic files
#
/tags
View
39 arch/arm/mach-mmp/kovan.c
@@ -24,6 +24,9 @@
#include <linux/leds_pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio_keys.h>
+#include <linux/spi/spidev.h> //JBS
+#include <linux/spi/spi.h> //JBS
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -98,6 +101,14 @@ static unsigned long kovan_pin_config[] __initdata = {
MFP_CFG_DRV_PULL(GPIO83, AF1, FAST, LOW),
+ /* SPI bus */
+ MFP_CFG(GPIO90, AF3), /* ssp3_clk */
+ MFP_CFG(GPIO91, AF3), /* ssp3_frm */
+ MFP_CFG(GPIO92, AF3), /* ssp3_miso */
+ MFP_CFG(GPIO93, AF3), /* ssp3_mosi */
+
+
+
/* I2C bus */
GPIO105_CI2C_SDA,
GPIO106_CI2C_SCL,
@@ -136,12 +147,9 @@ static unsigned long kovan_pin_config[] __initdata = {
/* FPGA programming SSPs */
MFP_CFG(GPIO118, AF1), /* ssp2_clk */
MFP_CFG(GPIO121, AF1), /* ssp2_txd */
- MFP_CFG(GPIO90, AF3), /* ssp3_clk */
+
/* FPGA status GPIOs */
- MFP_CFG(GPIO91, AF0), /* HPD report */
- MFP_CFG(GPIO92, AF0), /* Key ready */
- MFP_CFG(GPIO93, AF0), /* Low-voltage alarm */
MFP_CFG(GPIO79, AF0), /* Battery / ADC8 selection switch */
MFP_CFG(GPIO43, AF0), /* AC-present switch */
@@ -323,6 +331,21 @@ struct pxa168fb_mach_info kovan_lcd_ovly_info __initdata = {
};
+/* SPI devices -JBS
+ *
+ * Based on the beagelbone example from:
+ *
+ * http://communistcode.co.uk/blog/blogPost.php?blogPostID=1
+ */
+static struct spi_board_info kovan_spi3_info[] = {
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 26000000, //26 Mbps, but the document says 52. We need this to be exactly 26 to match the fpga clock it is providing
+ .bus_num = 2, //TODO: verify, SSP3 out of SSP1...SSP4, so it could be 2 (0-indexed) or 3 (1-indexed), I have seen people put .bus_num=0
+ .chip_select = 0, //TODO verify (FPGA_SYNC as CS?)
+ .mode = SPI_MODE_3, //TODO: verify this doesn't mess with i2c... my current fpga code assumes mode 3
+ },
+};
/*
@@ -348,6 +371,7 @@ static struct i2c_board_info pwr_i2c_board_info[] = {
static struct i2c_pxa_platform_data i2c_info __initdata = {
.use_pio = 1,
+ .fast_mode = 1,
};
@@ -497,6 +521,13 @@ static void __init kovan_init(void)
pxa168_add_u2o(&kovan_u2o_info);
+ if(spi_register_board_info(kovan_spi3_info, ARRAY_SIZE(kovan_spi3_info))){
+ printk("Error: Could not register SPI\n");
+ }else{
+ printk("supposedly registered SPI\n");
+ }
+
+
#ifdef CONFIG_USB_OTG
pxa168_add_u2ootg(&kovan_u2o_info);
pxa168_add_u2oehci(&kovan_u2o_info);
View
23 drivers/char/kovan_xilinx.c
@@ -367,7 +367,7 @@ void fpga_cleanup_module(void)
gpio_direction_input(120);
gpio_direction_input(97);
gpio_direction_input(49);
- gpio_direction_input(91);
+ gpio_direction_input(38);//gpio_direction_input(91); //HPD report
gpio_direction_input(119);
/* Get rid of our char dev entries */
@@ -450,8 +450,10 @@ void fpga_init_hw(void) {
MFP_CFG(GPIO120, AF0), // gpio -- fpga init
MFP_CFG(GPIO121, AF1), // ssp2_txd
MFP_CFG(GPIO97, AF0), // gpio -- fpga_done
-
- MFP_CFG(GPIO90, AF3), // ssp2_clk
+ //Note: HPD report MFP_CFG(GPIO_91, ...) missing
+ // which AF on GPIO 37 ?//
+ MFP_CFG(GPIO90, AF3), // ssp3_clk
+ MFP_CFG(GPIO37, AF0), // GPIO37 (nothing special yet, put into GPIO mode for APB clock)
};
mfp_config(ARRAY_AND_SIZE(pin_config));
@@ -472,15 +474,17 @@ void fpga_init_hw(void) {
gpio_request(49, "VSync genlock");
gpio_direction_input(49);
- gpio_request(91, "HPD report");
- gpio_direction_input(91);
+ gpio_request(38, "HPD report");//gpio_request(91, "HPD report");
+ gpio_direction_input(38);//gpio_direction_input(91);
printk("SSP2 clock enable (26 MHz)\n");
__raw_writel(0x23,(APB_VIRT_BASE + 0x15820));
__raw_writel(0x27,(APB_VIRT_BASE + 0x15820)); // reset the unit
__raw_writel(0x23,(APB_VIRT_BASE + 0x15820));
- printk("SSP3 clock enable (26 MHz)\n" );
+ // FIXME: switch this to use GPIO37 !!!
+ printk("Need to set up fpga clock (26 MHz)... still using SSP3\n");
+ //printk("SSP3 clock enable (26 MHz)\n" );
__raw_writel(0x23,(APB_VIRT_BASE + 0x1584c));
__raw_writel(0x27,(APB_VIRT_BASE + 0x1584c)); // reset the unit
__raw_writel(0x23,(APB_VIRT_BASE + 0x1584c));
@@ -546,14 +550,19 @@ void fpga_init_hw(void) {
__raw_writel(0x00d000bf, SSP2_SSCR0); // enable the port
+
+ // update for use of GPIO37 clock
__raw_writel(0x001f0000, SSP3_SSPSP); // continuous clock on SSP3
__raw_writel(0x01000000, SSP3_SSCR1); // this is actually a bizarre configuration
__raw_writel(0x0010003f, SSP3_SSCR0); // but it works.
- __raw_writel(0x001000ff, SSP3_SSCR0);
+ __raw_writel(0x001000ff, SSP3_SSCR0);
__raw_writel(0xdeadbeef, SSP3_SSDR); // dummy write to trigger clock
__raw_writel(0xdeadbeef, SSP3_SSDR); // dummy write to trigger clock
+
+
+
gpio_request(119, "FPGA reset (active low)");
gpio_direction_output(119,1);
gpio_set_value(119,0); // strobe low
View
1  scripts/kconfig/.conf.cmd
@@ -1 +0,0 @@
-cmd_scripts/kconfig/conf := gcc -o scripts/kconfig/conf scripts/kconfig/conf.o scripts/kconfig/zconf.tab.o -lncurses
View
2,429 scripts/kconfig/lex.zconf.c
@@ -1,2429 +0,0 @@
-
-#line 3 "scripts/kconfig/lex.zconf.c"
-
-#define YY_INT_ALIGNED short int
-
-/* A lexical scanner generated by flex */
-
-#define yy_create_buffer zconf_create_buffer
-#define yy_delete_buffer zconf_delete_buffer
-#define yy_flex_debug zconf_flex_debug
-#define yy_init_buffer zconf_init_buffer
-#define yy_flush_buffer zconf_flush_buffer
-#define yy_load_buffer_state zconf_load_buffer_state
-#define yy_switch_to_buffer zconf_switch_to_buffer
-#define yyin zconfin
-#define yyleng zconfleng
-#define yylex zconflex
-#define yylineno zconflineno
-#define yyout zconfout
-#define yyrestart zconfrestart
-#define yytext zconftext
-#define yywrap zconfwrap
-#define yyalloc zconfalloc
-#define yyrealloc zconfrealloc
-#define yyfree zconffree
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 35
-#if YY_FLEX_SUBMINOR_VERSION > 0
-#define FLEX_BETA
-#endif
-
-/* First, we deal with platform-specific or compiler-specific issues. */
-
-/* begin standard C headers. */
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-/* end standard C headers. */
-
-/* flex integer type definitions */
-
-#ifndef FLEXINT_H
-#define FLEXINT_H
-
-/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-
-/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
- */
-#ifndef __STDC_LIMIT_MACROS
-#define __STDC_LIMIT_MACROS 1
-#endif
-
-#include <inttypes.h>
-typedef int8_t flex_int8_t;
-typedef uint8_t flex_uint8_t;
-typedef int16_t flex_int16_t;
-typedef uint16_t flex_uint16_t;
-typedef int32_t flex_int32_t;
-typedef uint32_t flex_uint32_t;
-#else
-typedef signed char flex_int8_t;
-typedef short int flex_int16_t;
-typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
-typedef unsigned short int flex_uint16_t;
-typedef unsigned int flex_uint32_t;
-
-/* Limits of integral types. */
-#ifndef INT8_MIN
-#define INT8_MIN (-128)
-#endif
-#ifndef INT16_MIN
-#define INT16_MIN (-32767-1)
-#endif
-#ifndef INT32_MIN
-#define INT32_MIN (-2147483647-1)
-#endif
-#ifndef INT8_MAX
-#define INT8_MAX (127)
-#endif
-#ifndef INT16_MAX
-#define INT16_MAX (32767)
-#endif
-#ifndef INT32_MAX
-#define INT32_MAX (2147483647)
-#endif
-#ifndef UINT8_MAX
-#define UINT8_MAX (255U)
-#endif
-#ifndef UINT16_MAX
-#define UINT16_MAX (65535U)
-#endif
-#ifndef UINT32_MAX
-#define UINT32_MAX (4294967295U)
-#endif
-
-#endif /* ! C99 */
-
-#endif /* ! FLEXINT_H */
-
-#ifdef __cplusplus
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else /* ! __cplusplus */
-
-/* C99 requires __STDC__ to be defined as 1. */
-#if defined (__STDC__)
-
-#define YY_USE_CONST
-
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index. If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition. This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN (yy_start) = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state. The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START (((yy_start) - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE zconfrestart(zconfin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#ifndef YY_BUF_SIZE
-#ifdef __ia64__
-/* On IA-64, the buffer size is 16k, not 8k.
- * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
- * Ditto for the __ia64__ case accordingly.
- */
-#define YY_BUF_SIZE 32768
-#else
-#define YY_BUF_SIZE 16384
-#endif /* __ia64__ */
-#endif
-
-/* The state buf must be large enough to hold one state per character in the main buffer.
- */
-#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
-
-#ifndef YY_TYPEDEF_YY_BUFFER_STATE
-#define YY_TYPEDEF_YY_BUFFER_STATE
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-#endif
-
-extern int zconfleng;
-
-extern FILE *zconfin, *zconfout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
- #define YY_LESS_LINENO(n)
-
-/* Return all but the first "n" matched characters back to the input stream. */
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up zconftext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
- (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up zconftext again */ \
- } \
- while ( 0 )
-
-#define unput(c) yyunput( c, (yytext_ptr) )
-
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
-#ifndef YY_STRUCT_YY_BUFFER_STATE
-#define YY_STRUCT_YY_BUFFER_STATE
-struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- int yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
-
- int yy_bs_lineno; /**< The line count. */
- int yy_bs_column; /**< The column count. */
-
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
-
- int yy_buffer_status;
-
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via zconfrestart()), so that the user can continue scanning by
- * just pointing zconfin at a new input file.
- */
-#define YY_BUFFER_EOF_PENDING 2
-
- };
-#endif /* !YY_STRUCT_YY_BUFFER_STATE */
-
-/* Stack of input buffers. */
-static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
-static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- *
- * Returns the top of the stack, or NULL.
- */
-#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
- ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
- : NULL)
-
-/* Same as previous macro, but useful when we know that the buffer stack is not
- * NULL or when we need an lvalue. For internal use only.
- */
-#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
-
-/* yy_hold_char holds the character lost when zconftext is formed. */
-static char yy_hold_char;
-static int yy_n_chars; /* number of characters read into yy_ch_buf */
-int zconfleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
-
-/* Flag which is used to allow zconfwrap()'s to do buffer switches
- * instead of setting up a fresh zconfin. A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void zconfrestart (FILE *input_file );
-void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer );
-YY_BUFFER_STATE zconf_create_buffer (FILE *file,int size );
-void zconf_delete_buffer (YY_BUFFER_STATE b );
-void zconf_flush_buffer (YY_BUFFER_STATE b );
-void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer );
-void zconfpop_buffer_state (void );
-
-static void zconfensure_buffer_stack (void );
-static void zconf_load_buffer_state (void );
-static void zconf_init_buffer (YY_BUFFER_STATE b,FILE *file );
-
-#define YY_FLUSH_BUFFER zconf_flush_buffer(YY_CURRENT_BUFFER )
-
-YY_BUFFER_STATE zconf_scan_buffer (char *base,yy_size_t size );
-YY_BUFFER_STATE zconf_scan_string (yyconst char *yy_str );
-YY_BUFFER_STATE zconf_scan_bytes (yyconst char *bytes,int len );
-
-void *zconfalloc (yy_size_t );
-void *zconfrealloc (void *,yy_size_t );
-void zconffree (void * );
-
-#define yy_new_buffer zconf_create_buffer
-
-#define yy_set_interactive(is_interactive) \
- { \
- if ( ! YY_CURRENT_BUFFER ){ \
- zconfensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
-
-#define yy_set_bol(at_bol) \
- { \
- if ( ! YY_CURRENT_BUFFER ){\
- zconfensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
-
-#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
-
-/* Begin user sect3 */
-
-#define zconfwrap(n) 1
-#define YY_SKIP_YYWRAP
-
-typedef unsigned char YY_CHAR;
-
-FILE *zconfin = (FILE *) 0, *zconfout = (FILE *) 0;
-
-typedef int yy_state_type;
-
-extern int zconflineno;
-
-int zconflineno = 1;
-
-extern char *zconftext;
-#define yytext_ptr zconftext
-static yyconst flex_int16_t yy_nxt[][17] =
- {
- {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0
- },
-
- {
- 11, 12, 13, 14, 12, 12, 15, 12, 12, 12,
- 12, 12, 12, 12, 12, 12, 12
- },
-
- {
- 11, 12, 13, 14, 12, 12, 15, 12, 12, 12,
- 12, 12, 12, 12, 12, 12, 12
- },
-
- {
- 11, 16, 16, 17, 16, 16, 16, 16, 16, 16,
- 16, 16, 16, 18, 16, 16, 16
- },
-
- {
- 11, 16, 16, 17, 16, 16, 16, 16, 16, 16,
- 16, 16, 16, 18, 16, 16, 16
-
- },
-
- {
- 11, 19, 20, 21, 19, 19, 19, 19, 19, 19,
- 19, 19, 19, 19, 19, 19, 19
- },
-
- {
- 11, 19, 20, 21, 19, 19, 19, 19, 19, 19,
- 19, 19, 19, 19, 19, 19, 19
- },
-
- {
- 11, 22, 22, 23, 22, 24, 22, 22, 24, 22,
- 22, 22, 22, 22, 22, 25, 22
- },
-
- {
- 11, 22, 22, 23, 22, 24, 22, 22, 24, 22,
- 22, 22, 22, 22, 22, 25, 22
- },
-
- {
- 11, 26, 26, 27, 28, 29, 30, 31, 29, 32,
- 33, 34, 35, 35, 36, 37, 38
-
- },
-
- {
- 11, 26, 26, 27, 28, 29, 30, 31, 29, 32,
- 33, 34, 35, 35, 36, 37, 38
- },
-
- {
- -11, -11, -11, -11, -11, -11, -11, -11, -11, -11,
- -11, -11, -11, -11, -11, -11, -11
- },
-
- {
- 11, -12, -12, -12, -12, -12, -12, -12, -12, -12,
- -12, -12, -12, -12, -12, -12, -12
- },
-
- {
- 11, -13, 39, 40, -13, -13, 41, -13, -13, -13,
- -13, -13, -13, -13, -13, -13, -13
- },
-
- {
- 11, -14, -14, -14, -14, -14, -14, -14, -14, -14,
- -14, -14, -14, -14, -14, -14, -14
-
- },
-
- {
- 11, 42, 42, 43, 42, 42, 42, 42, 42, 42,
- 42, 42, 42, 42, 42, 42, 42
- },
-
- {
- 11, -16, -16, -16, -16, -16, -16, -16, -16, -16,
- -16, -16, -16, -16, -16, -16, -16
- },
-
- {
- 11, -17, -17, -17, -17, -17, -17, -17, -17, -17,
- -17, -17, -17, -17, -17, -17, -17
- },
-
- {
- 11, -18, -18, -18, -18, -18, -18, -18, -18, -18,
- -18, -18, -18, 44, -18, -18, -18
- },
-
- {
- 11, 45, 45, -19, 45, 45, 45, 45, 45, 45,
- 45, 45, 45, 45, 45, 45, 45
-
- },
-
- {
- 11, -20, 46, 47, -20, -20, -20, -20, -20, -20,
- -20, -20, -20, -20, -20, -20, -20
- },
-
- {
- 11, 48, -21, -21, 48, 48, 48, 48, 48, 48,
- 48, 48, 48, 48, 48, 48, 48
- },
-
- {
- 11, 49, 49, 50, 49, -22, 49, 49, -22, 49,
- 49, 49, 49, 49, 49, -22, 49
- },
-
- {
- 11, -23, -23, -23, -23, -23, -23, -23, -23, -23,
- -23, -23, -23, -23, -23, -23, -23
- },
-
- {
- 11, -24, -24, -24, -24, -24, -24, -24, -24, -24,
- -24, -24, -24, -24, -24, -24, -24
-
- },
-
- {
- 11, 51, 51, 52, 51, 51, 51, 51, 51, 51,
- 51, 51, 51, 51, 51, 51, 51
- },
-
- {
- 11, -26, -26, -26, -26, -26, -26, -26, -26, -26,
- -26, -26, -26, -26, -26, -26, -26
- },
-
- {
- 11, -27, -27, -27, -27, -27, -27, -27, -27, -27,
- -27, -27, -27, -27, -27, -27, -27
- },
-
- {
- 11, -28, -28, -28, -28, -28, -28, -28, -28, -28,
- -28, -28, -28, -28, 53, -28, -28
- },
-
- {
- 11, -29, -29, -29, -29, -29, -29, -29, -29, -29,
- -29, -29, -29, -29, -29, -29, -29
-
- },
-
- {
- 11, 54, 54, -30, 54, 54, 54, 54, 54, 54,
- 54, 54, 54, 54, 54, 54, 54
- },
-
- {
- 11, -31, -31, -31, -31, -31, -31, 55, -31, -31,
- -31, -31, -31, -31, -31, -31, -31
- },
-
- {
- 11, -32, -32, -32, -32, -32, -32, -32, -32, -32,
- -32, -32, -32, -32, -32, -32, -32
- },
-
- {
- 11, -33, -33, -33, -33, -33, -33, -33, -33, -33,
- -33, -33, -33, -33, -33, -33, -33
- },
-
- {
- 11, -34, -34, -34, -34, -34, -34, -34, -34, -34,
- -34, 56, 57, 57, -34, -34, -34
-
- },
-
- {
- 11, -35, -35, -35, -35, -35, -35, -35, -35, -35,
- -35, 57, 57, 57, -35, -35, -35
- },
-
- {
- 11, -36, -36, -36, -36, -36, -36, -36, -36, -36,
- -36, -36, -36, -36, -36, -36, -36
- },
-
- {
- 11, -37, -37, 58, -37, -37, -37, -37, -37, -37,
- -37, -37, -37, -37, -37, -37, -37
- },
-
- {
- 11, -38, -38, -38, -38, -38, -38, -38, -38, -38,
- -38, -38, -38, -38, -38, -38, 59
- },
-
- {
- 11, -39, 39, 40, -39, -39, 41, -39, -39, -39,
- -39, -39, -39, -39, -39, -39, -39
-
- },
-
- {
- 11, -40, -40, -40, -40, -40, -40, -40, -40, -40,
- -40, -40, -40, -40, -40, -40, -40
- },
-
- {
- 11, 42, 42, 43, 42, 42, 42, 42, 42, 42,
- 42, 42, 42, 42, 42, 42, 42
- },
-
- {
- 11, 42, 42, 43, 42, 42, 42, 42, 42, 42,
- 42, 42, 42, 42, 42, 42, 42
- },
-
- {
- 11, -43, -43, -43, -43, -43, -43, -43, -43, -43,
- -43, -43, -43, -43, -43, -43, -43
- },
-
- {
- 11, -44, -44, -44, -44, -44, -44, -44, -44, -44,
- -44, -44, -44, 44, -44, -44, -44
-
- },
-
- {
- 11, 45, 45, -45, 45, 45, 45, 45, 45, 45,
- 45, 45, 45, 45, 45, 45, 45
- },
-
- {
- 11, -46, 46, 47, -46, -46, -46, -46, -46, -46,
- -46, -46, -46, -46, -46, -46, -46
- },
-
- {
- 11, 48, -47, -47, 48, 48, 48, 48, 48, 48,
- 48, 48, 48, 48, 48, 48, 48
- },
-
- {
- 11, -48, -48, -48, -48, -48, -48, -48, -48, -48,
- -48, -48, -48, -48, -48, -48, -48
- },
-
- {
- 11, 49, 49, 50, 49, -49, 49, 49, -49, 49,
- 49, 49, 49, 49, 49, -49, 49
-
- },
-
- {
- 11, -50, -50, -50, -50, -50, -50, -50, -50, -50,
- -50, -50, -50, -50, -50, -50, -50
- },
-
- {
- 11, -51, -51, 52, -51, -51, -51, -51, -51, -51,
- -51, -51, -51, -51, -51, -51, -51
- },
-
- {
- 11, -52, -52, -52, -52, -52, -52, -52, -52, -52,
- -52, -52, -52, -52, -52, -52, -52
- },
-
- {
- 11, -53, -53, -53, -53, -53, -53, -53, -53, -53,
- -53, -53, -53, -53, -53, -53, -53
- },
-
- {
- 11, 54, 54, -54, 54, 54, 54, 54, 54, 54,
- 54, 54, 54, 54, 54, 54, 54
-
- },
-
- {
- 11, -55, -55, -55, -55, -55, -55, -55, -55, -55,
- -55, -55, -55, -55, -55, -55, -55
- },
-
- {
- 11, -56, -56, -56, -56, -56, -56, -56, -56, -56,
- -56, 60, 57, 57, -56, -56, -56
- },
-
- {
- 11, -57, -57, -57, -57, -57, -57, -57, -57, -57,
- -57, 57, 57, 57, -57, -57, -57
- },
-
- {
- 11, -58, -58, -58, -58, -58, -58, -58, -58, -58,
- -58, -58, -58, -58, -58, -58, -58
- },
-
- {
- 11, -59, -59, -59, -59, -59, -59, -59, -59, -59,
- -59, -59, -59, -59, -59, -59, -59
-
- },
-
- {
- 11, -60, -60, -60, -60, -60, -60, -60, -60, -60,
- -60, 57, 57, 57, -60, -60, -60
- },
-
- } ;
-
-static yy_state_type yy_get_previous_state (void );
-static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
-static int yy_get_next_buffer (void );
-static void yy_fatal_error (yyconst char msg[] );
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up zconftext.
- */
-#define YY_DO_BEFORE_ACTION \
- (yytext_ptr) = yy_bp; \
- zconfleng = (size_t) (yy_cp - yy_bp); \
- (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
- (yy_c_buf_p) = yy_cp;
-
-#define YY_NUM_RULES 33
-#define YY_END_OF_BUFFER 34
-/* This struct is not used in this scanner,
- but its presence is necessary. */
-struct yy_trans_info
- {
- flex_int32_t yy_verify;
- flex_int32_t yy_nxt;
- };
-static yyconst flex_int16_t yy_accept[61] =
- { 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 34, 5, 4, 2, 3, 7, 8, 6, 32, 29,
- 31, 24, 28, 27, 26, 22, 17, 13, 16, 20,
- 22, 11, 12, 19, 19, 14, 22, 22, 4, 2,
- 3, 3, 1, 6, 32, 29, 31, 30, 24, 23,
- 26, 25, 15, 20, 9, 19, 19, 21, 10, 18
- } ;
-
-static yyconst flex_int32_t yy_ec[256] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 2, 4, 5, 6, 1, 1, 7, 8, 9,
- 10, 1, 1, 1, 11, 12, 12, 13, 13, 13,
- 13, 13, 13, 13, 13, 13, 13, 1, 1, 1,
- 14, 1, 1, 1, 13, 13, 13, 13, 13, 13,
- 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
- 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
- 1, 15, 1, 1, 13, 1, 13, 13, 13, 13,
-
- 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
- 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
- 13, 13, 1, 16, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1
- } ;
-
-extern int zconf_flex_debug;
-int zconf_flex_debug = 0;
-
-/* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *zconftext;
-#define YY_NO_INPUT 1
-
-/*
- * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
- * Released under the terms of the GNU GPL v2.0.
- */
-
-#include <limits.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#define LKC_DIRECT_LINK
-#include "lkc.h"
-
-#define START_STRSIZE 16
-
-static struct {
- struct file *file;
- int lineno;
-} current_pos;
-
-static char *text;
-static int text_size, text_asize;
-
-struct buffer {
- struct buffer *parent;
- YY_BUFFER_STATE state;
-};
-
-struct buffer *current_buf;
-
-static int last_ts, first_ts;
-
-static void zconf_endhelp(void);
-static void zconf_endfile(void);
-
-static void new_string(void)
-{
- text = malloc(START_STRSIZE);
- text_asize = START_STRSIZE;
- text_size = 0;
- *text = 0;
-}
-
-static void append_string(const char *str, int size)
-{
- int new_size = text_size + size + 1;
- if (new_size > text_asize) {
- new_size += START_STRSIZE - 1;
- new_size &= -START_STRSIZE;
- text = realloc(text, new_size);
- text_asize = new_size;
- }
- memcpy(text + text_size, str, size);
- text_size += size;
- text[text_size] = 0;
-}
-
-static void alloc_string(const char *str, int size)
-{
- text = malloc(size + 1);
- memcpy(text, str, size);
- text[size] = 0;
-}
-
-#define INITIAL 0
-#define COMMAND 1
-#define HELP 2
-#define STRING 3
-#define PARAM 4
-
-#ifndef YY_NO_UNISTD_H
-/* Special case for "unistd.h", since it is non-ANSI. We include it way
- * down here because we want the user's section 1 to have been scanned first.
- * The user has a chance to override it with an option.
- */
-#include <unistd.h>
-#endif
-
-#ifndef YY_EXTRA_TYPE
-#define YY_EXTRA_TYPE void *
-#endif
-
-static int yy_init_globals (void );
-
-/* Accessor methods to globals.
- These are made visible to non-reentrant scanners for convenience. */
-
-int zconflex_destroy (void );
-
-int zconfget_debug (void );
-
-void zconfset_debug (int debug_flag );
-
-YY_EXTRA_TYPE zconfget_extra (void );
-
-void zconfset_extra (YY_EXTRA_TYPE user_defined );
-
-FILE *zconfget_in (void );
-
-void zconfset_in (FILE * in_str );
-
-FILE *zconfget_out (void );
-
-void zconfset_out (FILE * out_str );
-
-int zconfget_leng (void );
-
-char *zconfget_text (void );
-
-int zconfget_lineno (void );
-
-void zconfset_lineno (int line_number );
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int zconfwrap (void );
-#else
-extern int zconfwrap (void );
-#endif
-#endif
-
- static void yyunput (int c,char *buf_ptr );
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char *,yyconst char *,int );
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * );
-#endif
-
-#ifndef YY_NO_INPUT
-
-#ifdef __cplusplus
-static int yyinput (void );
-#else
-static int input (void );
-#endif
-
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#ifdef __ia64__
-/* On IA-64, the buffer size is 16k, not 8k */
-#define YY_READ_BUF_SIZE 16384
-#else
-#define YY_READ_BUF_SIZE 8192
-#endif /* __ia64__ */
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0)
-#endif
-
-/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
- errno=0; \
- while ( (result = read( fileno(zconfin), (char *) buf, max_size )) < 0 ) \
- { \
- if( errno != EINTR) \
- { \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- break; \
- } \
- errno=0; \
- clearerr(zconfin); \
- }\
-\
-
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* end tables serialization structures and prototypes */
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL_IS_OURS 1
-
-extern int zconflex (void);
-
-#define YY_DECL int zconflex (void)
-#endif /* !YY_DECL */
-
-/* Code executed at the beginning of each rule, after zconftext and zconfleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
- YY_USER_ACTION
-
-/** The main scanner function which does all the work.
- */
-YY_DECL
-{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
-
- int str = 0;
- int ts, i;
-
- if ( !(yy_init) )
- {
- (yy_init) = 1;
-
-#ifdef YY_USER_INIT
- YY_USER_INIT;
-#endif
-
- if ( ! (yy_start) )
- (yy_start) = 1; /* first start state */
-
- if ( ! zconfin )
- zconfin = stdin;
-
- if ( ! zconfout )
- zconfout = stdout;
-
- if ( ! YY_CURRENT_BUFFER ) {
- zconfensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- zconf_create_buffer(zconfin,YY_BUF_SIZE );
- }
-
- zconf_load_buffer_state( );
- }
-
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = (yy_c_buf_p);
-
- /* Support of zconftext. */
- *yy_cp = (yy_hold_char);
-
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
-
- yy_current_state = (yy_start);
-yy_match:
- while ( (yy_current_state = yy_nxt[yy_current_state][ yy_ec[YY_SC_TO_UI(*yy_cp)] ]) > 0 )
- ++yy_cp;
-
- yy_current_state = -yy_current_state;
-
-yy_find_action:
- yy_act = yy_accept[yy_current_state];
-
- YY_DO_BEFORE_ACTION;
-
-do_action: /* This label is used only to access EOF actions. */
-
- switch ( yy_act )
- { /* beginning of action switch */
-case 1:
-/* rule 1 can match eol */
-case 2:
-/* rule 2 can match eol */
-YY_RULE_SETUP
-{
- current_file->lineno++;
- return T_EOL;
-}
- YY_BREAK
-case 3:
-YY_RULE_SETUP
-
- YY_BREAK
-case 4:
-YY_RULE_SETUP
-{
- BEGIN(COMMAND);
-}
- YY_BREAK
-case 5:
-YY_RULE_SETUP
-{
- unput(zconftext[0]);
- BEGIN(COMMAND);
-}
- YY_BREAK
-
-case 6:
-YY_RULE_SETUP
-{
- struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
- BEGIN(PARAM);
- current_pos.file = current_file;
- current_pos.lineno = current_file->lineno;
- if (id && id->flags & TF_COMMAND) {
- zconflval.id = id;
- return id->token;
- }
- alloc_string(zconftext, zconfleng);
- zconflval.string = text;
- return T_WORD;
- }
- YY_BREAK
-case 7:
-YY_RULE_SETUP
-
- YY_BREAK
-case 8:
-/* rule 8 can match eol */
-YY_RULE_SETUP
-{
- BEGIN(INITIAL);
- current_file->lineno++;
- return T_EOL;
- }
- YY_BREAK
-
-case 9:
-YY_RULE_SETUP
-return T_AND;
- YY_BREAK
-case 10:
-YY_RULE_SETUP
-return T_OR;
- YY_BREAK
-case 11:
-YY_RULE_SETUP
-return T_OPEN_PAREN;
- YY_BREAK
-case 12:
-YY_RULE_SETUP
-return T_CLOSE_PAREN;
- YY_BREAK
-case 13:
-YY_RULE_SETUP
-return T_NOT;
- YY_BREAK
-case 14:
-YY_RULE_SETUP
-return T_EQUAL;
- YY_BREAK
-case 15:
-YY_RULE_SETUP
-return T_UNEQUAL;
- YY_BREAK
-case 16:
-YY_RULE_SETUP
-{
- str = zconftext[0];
- new_string();
- BEGIN(STRING);
- }
- YY_BREAK
-case 17:
-/* rule 17 can match eol */
-YY_RULE_SETUP
-BEGIN(INITIAL); current_file->lineno++; return T_EOL;
- YY_BREAK
-case 18:
-YY_RULE_SETUP
-/* ignore */
- YY_BREAK
-case 19:
-YY_RULE_SETUP
-{
- struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
- if (id && id->flags & TF_PARAM) {
- zconflval.id = id;
- return id->token;
- }
- alloc_string(zconftext, zconfleng);
- zconflval.string = text;
- return T_WORD;
- }
- YY_BREAK
-case 20:
-YY_RULE_SETUP
-/* comment */
- YY_BREAK
-case 21:
-/* rule 21 can match eol */
-YY_RULE_SETUP
-current_file->lineno++;
- YY_BREAK
-case 22:
-YY_RULE_SETUP
-
- YY_BREAK
-case YY_STATE_EOF(PARAM):
-{
- BEGIN(INITIAL);
- }
- YY_BREAK
-
-case 23:
-/* rule 23 can match eol */
-*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up zconftext again */
-YY_RULE_SETUP
-{
- append_string(zconftext, zconfleng);
- zconflval.string = text;
- return T_WORD_QUOTE;
- }
- YY_BREAK
-case 24:
-YY_RULE_SETUP
-{
- append_string(zconftext, zconfleng);
- }
- YY_BREAK
-case 25:
-/* rule 25 can match eol */
-*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up zconftext again */
-YY_RULE_SETUP
-{
- append_string(zconftext + 1, zconfleng - 1);
- zconflval.string = text;
- return T_WORD_QUOTE;
- }
- YY_BREAK
-case 26:
-YY_RULE_SETUP
-{
- append_string(zconftext + 1, zconfleng - 1);
- }
- YY_BREAK
-case 27:
-YY_RULE_SETUP
-{
- if (str == zconftext[0]) {
- BEGIN(PARAM);
- zconflval.string = text;
- return T_WORD_QUOTE;
- } else
- append_string(zconftext, 1);
- }
- YY_BREAK
-case 28:
-/* rule 28 can match eol */
-YY_RULE_SETUP
-{
- printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno());
- current_file->lineno++;
- BEGIN(INITIAL);
- return T_EOL;
- }
- YY_BREAK
-case YY_STATE_EOF(STRING):
-{
- BEGIN(INITIAL);
- }
- YY_BREAK
-
-case 29:
-YY_RULE_SETUP
-{
- ts = 0;
- for (i = 0; i < zconfleng; i++) {
- if (zconftext[i] == '\t')
- ts = (ts & ~7) + 8;
- else
- ts++;
- }
- last_ts = ts;
- if (first_ts) {
- if (ts < first_ts) {
- zconf_endhelp();
- return T_HELPTEXT;
- }
- ts -= first_ts;
- while (ts > 8) {
- append_string(" ", 8);
- ts -= 8;
- }
- append_string(" ", ts);
- }
- }
- YY_BREAK
-case 30:
-/* rule 30 can match eol */
-*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
-(yy_c_buf_p) = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up zconftext again */
-YY_RULE_SETUP
-{
- current_file->lineno++;
- zconf_endhelp();
- return T_HELPTEXT;
- }
- YY_BREAK
-case 31:
-/* rule 31 can match eol */
-YY_RULE_SETUP
-{
- current_file->lineno++;
- append_string("\n", 1);
- }
- YY_BREAK
-case 32:
-YY_RULE_SETUP
-{
- while (zconfleng) {
- if ((zconftext[zconfleng-1] != ' ') && (zconftext[zconfleng-1] != '\t'))
- break;
- zconfleng--;
- }
- append_string(zconftext, zconfleng);
- if (!first_ts)
- first_ts = last_ts;
- }
- YY_BREAK
-case YY_STATE_EOF(HELP):
-{
- zconf_endhelp();
- return T_HELPTEXT;
- }
- YY_BREAK
-
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(COMMAND):
-{
- if (current_file) {
- zconf_endfile();
- return T_EOL;
- }
- fclose(zconfin);
- yyterminate();
-}
- YY_BREAK
-case 33:
-YY_RULE_SETUP
-YY_FATAL_ERROR( "flex scanner jammed" );
- YY_BREAK
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed zconfin at a new source and called
- * zconflex(). If so, then we have to assure
- * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- YY_CURRENT_BUFFER_LVALUE->yy_input_file = zconfin;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
- (yy_did_buffer_switch_on_eof) = 0;
-
- if ( zconfwrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * zconftext, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) =
- (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- (yy_c_buf_p) =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
-} /* end of zconflex */
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
- */
-static int yy_get_next_buffer (void)
-{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
- if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
- int num_to_read =
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-
- /* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
-
- int yy_c_buf_p_offset =
- (int) ((yy_c_buf_p) - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
- int new_size = b->yy_buf_size * 2;
-
- if ( new_size <= 0 )
- b->yy_buf_size += b->yy_buf_size / 8;
- else
- b->yy_buf_size *= 2;
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
- zconfrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
-
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
- (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
-
- num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
- number_to_move - 1;
-
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), (size_t) num_to_read );
-
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- zconfrestart(zconfin );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
- /* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
- if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
- }
-
- (yy_n_chars) += number_to_move;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
- (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
- return ret_val;
-}
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
- static yy_state_type yy_get_previous_state (void)
-{
- register yy_state_type yy_current_state;
- register char *yy_cp;
-
- yy_current_state = (yy_start);
-
- for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- yy_current_state = yy_nxt[yy_current_state][(*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1)];
- }
-
- return yy_current_state;
-}
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- * next_state = yy_try_NUL_trans( current_state );
- */
- static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
-{
- register int yy_is_jam;
-
- yy_current_state = yy_nxt[yy_current_state][1];
- yy_is_jam = (yy_current_state <= 0);
-
- return yy_is_jam ? 0 : yy_current_state;
-}
-
- static void yyunput (int c, register char * yy_bp )
-{
- register char *yy_cp;
-
- yy_cp = (yy_c_buf_p);
-
- /* undo effects of setting up zconftext */
- *yy_cp = (yy_hold_char);
-
- if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- { /* need to shift things up to make room */
- /* +2 for EOB chars. */
- register int number_to_move = (yy_n_chars) + 2;
- register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
- register char *source =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
-
- while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- *--dest = *--source;
-
- yy_cp += (int) (dest - source);
- yy_bp += (int) (dest - source);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
-
- if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- YY_FATAL_ERROR( "flex scanner push-back overflow" );
- }
-
- *--yy_cp = (char) c;
-
- (yytext_ptr) = yy_bp;
- (yy_hold_char) = *yy_cp;
- (yy_c_buf_p) = yy_cp;
-}
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
- static int yyinput (void)
-#else
- static int input (void)
-#endif
-
-{
- int c;
-
- *(yy_c_buf_p) = (yy_hold_char);
-
- if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
- *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
- int offset = (yy_c_buf_p) - (yytext_ptr);
- ++(yy_c_buf_p);
-
- switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- zconfrestart(zconfin );
-
- /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( zconfwrap( ) )
- return EOF;
-
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
-#ifdef __cplusplus
- return yyinput();
-#else
- return input();
-#endif
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
-
- c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
- *(yy_c_buf_p) = '\0'; /* preserve zconftext */
- (yy_hold_char) = *++(yy_c_buf_p);
-
- return c;
-}
-#endif /* ifndef YY_NO_INPUT */
-
-/** Immediately switch to a different input stream.
- * @param input_file A readable stream.
- *
- * @note This function does not reset the start condition to @c INITIAL .
- */
- void zconfrestart (FILE * input_file )
-{
-
- if ( ! YY_CURRENT_BUFFER ){
- zconfensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- zconf_create_buffer(zconfin,YY_BUF_SIZE );
- }
-
- zconf_init_buffer(YY_CURRENT_BUFFER,input_file );
- zconf_load_buffer_state( );
-}
-
-/** Switch to a different input buffer.
- * @param new_buffer The new input buffer.
- *
- */
- void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer )
-{
-
- /* TODO. We should be able to replace this entire function body
- * with
- * zconfpop_buffer_state();
- * zconfpush_buffer_state(new_buffer);
- */
- zconfensure_buffer_stack ();
- if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
- zconf_load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (zconfwrap()) processing, but the only time this flag
- * is looked at is after zconfwrap() is called, so it's safe
- * to go ahead and always set it.
- */
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-static void zconf_load_buffer_state (void)
-{
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
- zconfin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
- (yy_hold_char) = *(yy_c_buf_p);
-}
-
-/** Allocate and initialize an input buffer state.
- * @param file A readable stream.
- * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
- * @return the allocated buffer state.
- */
- YY_BUFFER_STATE zconf_create_buffer (FILE * file, int size )
-{
- YY_BUFFER_STATE b;
-
- b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
-
- b->yy_buf_size = size;
-
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) zconfalloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
-
- b->yy_is_our_buffer = 1;
-
- zconf_init_buffer(b,file );
-
- return b;
-}
-
-/** Destroy the buffer.
- * @param b a buffer created with zconf_create_buffer()
- *
- */
- void zconf_delete_buffer (YY_BUFFER_STATE b )
-{
-
- if ( ! b )
- return;
-
- if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
- YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
-
- if ( b->yy_is_our_buffer )
- zconffree((void *) b->yy_ch_buf );
-
- zconffree((void *) b );
-}
-
-/* Initializes or reinitializes a buffer.
- * This function is sometimes called more than once on the same buffer,
- * such as during a zconfrestart() or at EOF.
- */
- static void zconf_init_buffer (YY_BUFFER_STATE b, FILE * file )
-
-{
- int oerrno = errno;
-
- zconf_flush_buffer(b );
-
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
-
- /* If b is the current buffer, then zconf_init_buffer was _probably_
- * called from zconfrestart() or through yy_get_next_buffer.
- * In that case, we don't want to reset the lineno or column.
- */
- if (b != YY_CURRENT_BUFFER){
- b->yy_bs_lineno = 1;
- b->yy_bs_column = 0;
- }
-
- b->yy_is_interactive = 0;
-
- errno = oerrno;
-}
-
-/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
- * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
<