WXLink software for Grove LoRa Receiver - used in Project Curacao2
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
.gitignore
Crc16.h
MemoryFree.cpp
MemoryFree.h
README.md
SDL_Arduino_WXLink_LoRa_Rx.ino

README.md

SwitchDoc Labs LoRa WXLink Source code for the Reciever (Rx)

WXLink is designed for remote wireless transmission of WeatherRack and AM2315 information to a Arduino or Raspberry Pi based base weather station

Designed for an Arduino UNO and SwitchDoc Labs Mini Pro LP (16MHz Low Power Arduino)

SOFTWAREVERSION 004 - Uploaded to Archive on August 19, 2018

This software requires you to install RH_RF95 as an Arduino Library. You can download it here:

http://www.airspayce.com/mikem/arduino/RadioHead/index.html

Note: If you have properly set up the Rx software it will show up as device address 0x08 on your I2C bus.