Suzuki SV650 ECU Decoder
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
diptrace
eagle
src
.gitignore
LICENSE
README.md

README.md

Suzuki SV650 ECU Decoder

This is the Arduino code (for a PJRC Teensy 2.0) and necessary CAD/schematic files for creating a PCB to creating your own 2nd Generation SV650 ECU Decoder to replace the error lights & codes normally displayed by the stock dash unit.

This supports the following:

  • Oil pressure warning light
  • Neutral light
  • EFI warning light
  • Low fuel light *
  • Display the water temp from the the stock water temp sensor
  • Ability to decode EFI error codes from the SV650 ECU
  • TPS adjustment indicator **

[*] Note: Untested.

[**] Note: Normally the 4 digit LED display shows the water temp. To show the TPS indicator or ECU error codes, you’ll need to use a “Suzuki diagnostic tool” (aka a paperclip) to short two wires per the shop manual.

More information about this project is available on my blog and on the wiki.