substitutions:
  name: jk-bms
  device_description: "Monitor and control a JK-BMS via bluetooth"
  external_components_source: github://syssi/esphome-jk-bms@main
  mac_address: C8:47:8C:E1:E1:74
  # Defaults to "JK02"
  # Please use "JK02_32S" if you own a JK-B2A8S20P >= hardware version 11+ (f.e. JK-B2A8S20P hw 11.XW, sw 11.26)
  # Please use "JK04" if you have some old JK-BMS <= hardware version 3 (f.e. JK-B2A16S hw 3.0, sw. 3.3.0)
  protocol_version: JK02

esphome:
  name: ${name}
  comment: ${device_description}
  project:
    name: "syssi.esphome-jk-bms"
    version: 1.3.0
  platformio_options:
    build_flags: 
      - -DCONFIG_ARDUINO_LOOP_STACK_SIZE=32768

esp32:
  board: az-delivery-devkit-v4
# default board esp32dev
  framework:
#  The arduino platform crashs
#    type: arduino
#    version: latest
    type: esp-idf
    version: latest

external_components:
  - source: ${external_components_source}
    refresh: 0s

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  use_address: 192.168.178.94
  manual_ip:
    static_ip: 192.168.178.94
    gateway: 192.168.178.1
    subnet: 255.255.255.0

ota:
  safe_mode: true
  password: "XXXXX"
  id: JKBMS

logger:
  level: INFO

# If you don't use Home Assistant please remove this `api` section and uncomment the `mqtt` component!
api:

# The MQTT component is ESP-IDF compatible since ESPHome version 2022.4.0. If
# ESPHome suggests to use the arduino framework instead because of missing ESP-IDF
# framework support you should update your setup.
mqtt:
   broker: !secret mqtt_host
#   username: !secret mqtt_username
#   password: !secret mqtt_password
   id: mqtt_client


esp32_ble_tracker:
  on_ble_advertise:
    then:
      - lambda: |-
          if (x.get_name().rfind("JK-", 0) == 0) {
            ESP_LOGI("ble_adv", "New JK-BMS found");
            ESP_LOGI("ble_adv", "  Name: %s", x.get_name().c_str());
            ESP_LOGI("ble_adv", "  MAC address: %s", x.address_str().c_str());
            ESP_LOGD("ble_adv", "  Advertised service UUIDs:");
            for (auto uuid : x.get_service_uuids()) {
              ESP_LOGD("ble_adv", "    - %s", uuid.to_string().c_str());
            }
          }

ble_client:
  - mac_address: ${mac_address}
    id: client0

jk_bms_ble:
  - ble_client_id: client0
    protocol_version: ${protocol_version}
    throttle: 5s
    id: bms0

binary_sensor:
  - platform: jk_bms_ble
    balancing:
      name: "${name} balancing"
    charging:
      name: "${name} charging"
    discharging:
      name: "${name} discharging"

button:
  - platform: jk_bms_ble
    retrieve_settings:
      name: "${name} retrieve settings"
    retrieve_device_info:
      name: "${name} retrieve device info"

number:
  - platform: jk_bms_ble
    jk_bms_ble_id: bms0
    balance_trigger_voltage:
      name: "${name} balance trigger voltage"
    cell_count:
      name: "${name} cell count"
    total_battery_capacity:
      name: "${name} total battery capacity"
    cell_voltage_overvoltage_protection:
      name: "${name} cell voltage overvoltage protection"
    cell_voltage_overvoltage_recovery:
      name: "${name} cell voltage overvoltage recovery"
    cell_voltage_undervoltage_protection:
      name: "${name} cell voltage undervoltage protection"
    cell_voltage_undervoltage_recovery:
      name: "${name} cell voltage undervoltage recovery"
    balance_starting_voltage:
      name: "${name} balance starting voltage"
    voltage_calibration:
      name: "${name} voltage calibration"
    current_calibration:
      name: "${name} current calibration"
    power_off_voltage:
      name: "${name} power off voltage"
    max_balance_current:
      name: "${name} max balance current"
    max_charge_current:
      name: "${name} max charge current"
    max_discharge_current:
      name: "${name} max discharge current"

sensor:
  - platform: jk_bms_ble
    jk_bms_ble_id: bms0
    min_cell_voltage:
      name: "${name} min cell voltage"
    max_cell_voltage:
      name: "${name} max cell voltage"
    min_voltage_cell:
      name: "${name} min voltage cell"
    max_voltage_cell:
      name: "${name} max voltage cell"
    delta_cell_voltage:
      name: "${name} delta cell voltage"
    average_cell_voltage:
      name: "${name} average cell voltage"
    cell_voltage_1:
      name: "${name} cell voltage 1"
    cell_voltage_2:
      name: "${name} cell voltage 2"
    cell_voltage_3:
      name: "${name} cell voltage 3"
    cell_voltage_4:
      name: "${name} cell voltage 4"
    cell_voltage_5:
      name: "${name} cell voltage 5"
    cell_voltage_6:
      name: "${name} cell voltage 6"
    cell_voltage_7:
      name: "${name} cell voltage 7"
    cell_voltage_8:
      name: "${name} cell voltage 8"
    cell_voltage_9:
      name: "${name} cell voltage 9"
    cell_voltage_10:
      name: "${name} cell voltage 10"
    cell_voltage_11:
      name: "${name} cell voltage 11"
    cell_voltage_12:
      name: "${name} cell voltage 12"
    cell_voltage_13:
      name: "${name} cell voltage 13"
    cell_voltage_14:
      name: "${name} cell voltage 14"
    cell_voltage_15:
      name: "${name} cell voltage 15"
    cell_voltage_16:
      name: "${name} cell voltage 16"
    cell_voltage_17:
      name: "${name} cell voltage 17"
    cell_voltage_18:
      name: "${name} cell voltage 18"
    cell_voltage_19:
      name: "${name} cell voltage 19"
    cell_voltage_20:
      name: "${name} cell voltage 20"
    cell_voltage_21:
      name: "${name} cell voltage 21"
    cell_voltage_22:
      name: "${name} cell voltage 22"
    cell_voltage_23:
      name: "${name} cell voltage 23"
    cell_voltage_24:
      name: "${name} cell voltage 24"
    cell_resistance_1:
      name: "${name} cell resistance 1"
    cell_resistance_2:
      name: "${name} cell resistance 2"
    cell_resistance_3:
      name: "${name} cell resistance 3"
    cell_resistance_4:
      name: "${name} cell resistance 4"
    cell_resistance_5:
      name: "${name} cell resistance 5"
    cell_resistance_6:
      name: "${name} cell resistance 6"
    cell_resistance_7:
      name: "${name} cell resistance 7"
    cell_resistance_8:
      name: "${name} cell resistance 8"
    cell_resistance_9:
      name: "${name} cell resistance 9"
    cell_resistance_10:
      name: "${name} cell resistance 10"
    cell_resistance_11:
      name: "${name} cell resistance 11"
    cell_resistance_12:
      name: "${name} cell resistance 12"
    cell_resistance_13:
      name: "${name} cell resistance 13"
    cell_resistance_14:
      name: "${name} cell resistance 14"
    cell_resistance_15:
      name: "${name} cell resistance 15"
    cell_resistance_16:
      name: "${name} cell resistance 16"
    cell_resistance_17:
      name: "${name} cell resistance 17"
    cell_resistance_18:
      name: "${name} cell resistance 18"
    cell_resistance_19:
      name: "${name} cell resistance 19"
    cell_resistance_20:
      name: "${name} cell resistance 20"
    cell_resistance_21:
      name: "${name} cell resistance 21"
    cell_resistance_22:
      name: "${name} cell resistance 22"
    cell_resistance_23:
      name: "${name} cell resistance 23"
    cell_resistance_24:
      name: "${name} cell resistance 24"
    total_voltage:
      name: "${name} total voltage"
    current:
      name: "${name} current"
    power:
      name: "${name} power"
    charging_power:
      name: "${name} charging power"
    discharging_power:
      name: "${name} discharging power"
    temperature_sensor_1:
      name: "${name} temperature sensor 1"
    temperature_sensor_2:
      name: "${name} temperature sensor 2"
    power_tube_temperature:
      name: "${name} power tube temperature"
    state_of_charge:
      name: "${name} state of charge"
    capacity_remaining:
      name: "${name} capacity remaining"
    total_battery_capacity_setting:
      name: "${name} total battery capacity setting"
    charging_cycles:
      name: "${name} charging cycles"
    total_charging_cycle_capacity:
      name: "${name} total charging cycle capacity"
    total_runtime:
      name: "${name} total runtime"
    balancing_current:
      name: "${name} balancing current"
    errors_bitmask:
      name: "${name} errors bitmask"

switch:
  - platform: jk_bms_ble
    charging:
      name: "${name} charging"
    discharging:
      name: "${name} discharging"
    balancer:
      name: "${name} balancer"

  - platform: ble_client
    ble_client_id: client0
    name: "${name} enable bluetooth connection"

text_sensor:
  - platform: jk_bms_ble
    errors:
      name: "${name} errors"
    total_runtime_formatted:
      name: "${name} total runtime formatted"