Skip to content


Repository files navigation


Laser-cut ATX Computer Case

This is a full sized ATX computer case you can laser cut (and probably cut using a CNC but I don't have one of those)

It should fit any ATX compliant motherboard, but I've only tried the one motherboard I have.

It has space for 3x 3.5" hard drives and a 2.5" hard drive, which are held by seperate 3d printed modules.

The entire design was done in Fusion 360. You can view it / download it here or use the LACC.f3z file attached.

render of case from fusion 360

actual built case

more photos



  • 5x sheets of 24" x 12" sheet of 1/8" or 3mm acrylic or MDF
  • 26x M3 nuts
  • 20x M3x16 screws (for holding case together)
  • 6x M3x12 standoffs (for motherboard)
  • 6x M3x4 screws (for standoffs)
  • 2x 120mm Computer Fan
  • 4x 6-32 screws for ATX power supply

Hard Drive Bays

  • 2x of the 3.5" drive holder parts
  • 2x of the 2.5" drive holder parts
  • 6x M3x10 screws
  • 6x M3 nuts

Models Used


Creative Commons Attribution-ShareAlike 4.0 International

You are free to use, sell and remix freely as long as any modifications you make are also shared under this same license


No releases published


No packages published