Switch branches/tags
Nothing to show
Find file History
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
..
Failed to load latest commit information.
CuttleTalk
assets
.catalog_metadata
README.md

README.md

#419 lite2sound-bc

Building Lite2Sound Boldport Club Project #26.

Build

▶️ return to the LEAP Catalog

Notes

Lite2Sound BC is the 26th Boldport project, and is a collaboration with Rare Waves LLC.

It uses a photodiode to detect audio-frequencies from light, which are amplified and piped to an audio jack (or optionally to direct line-out).

Best of all - it comes in an Altoids-sized can!

See the LEAP#420 CuttleTalk project for a full demo of the finished thing.

The Kit

Qty Ref Item
x3 C1,3,4 10µF electrolytic capacitors, Nichicon UWX1C100MCL2GB
x2 C9,11 220µF electrolytic capacitors,Multicomp MCVVT016M221EA6L
x2 C5,6 220pF C0G ceramic capacitors, Multicomp MC1206N221J500CT
x3 C2,7,10 100nF ceramic capacitors, Kemet C1206S104K5RACTU
x3 R7 10Ω resistors, Walsin WR12X10R0FTL
x3 R3,4 220Ω resistors, Walsin WR12X2200FTL
x3 R1,2,9 20KΩ resistors, Walsin WR12X2002FTL
x3 R5,6 2MΩ resistors, Walsin WR12W2004FTL
x1 D2 Schottky diode, Diodes 1N5819HW-7-F
x1 Photodiode, On Semi QSD2030F
x1 D1 Photodiode, On Semi QSD2030
x1 IC1 Low noise op-amp, Diodes TL072SG-13
x1 IC2 Power amplifier, TI LM386MX-1/NOPB
x1 3.5mm stereo socket, TruConnect PJ-301DM
x1 VR1 50kΩ pot, Suntan TSR3386F-EY5-503-TR
x2 SW1,SW2 Switch, C&K JS202011SCQN
x1 Battery contact positive, MPD BSPCF
x1 Battery contact negative, MPD BSPCM
x3 12.7mm self-adhesive feet, RVFM PD.2125
x1 Lovely PCB
x1 Metal enclosure with a hole
x1 Light blocking sticker for tin

Note: some resistors are provided in extra quantity than is required, and there are two versions of the photodiode.

kit_parts

As uaual, a beautiful PCB designed by Boldport:

kit_pcb_front kit_pcb_rear

Two Photodiodes?

The kits comes with a choice of two photodiodes: QSD2030 and QSD2030F. These are basically identical, but the QSD2030F is in black epoxy which provides a daylight filter. A daylight filter is intended to attenuate the effect of outdoor/sunlight and prevent it overwhelming other signals (from reports: YMMV)

QSD2030

  • Wide reception angle: 40°
  • Package material and color: clear epoxy
  • High sensitivity
  • Peak sensitivity λ = 880nm

QSD2030F

  • Wide reception angle: 40°
  • Daylight Filter
  • Package material and color: Black Epoxy
  • High Sensitivity
  • Peak sensitivity λ = 880nm

I'm not planning extensive outdoor usage, so I built the kit with the standard QSD2030 without daylight filter.

Construction Tips from BC Slack!

…oh, the feet go on the tin. This sense makes (@kpreid)

.. saved me doing something stupid.

the board with this kit seemed to absorb a lot of heat when I hit it with hot air. took some time to heat up (@kbx81)

.. I used hot air for the SMD assembly, but didn't have similar issues.

Circuit

As provided by Boldport. Note: it doesn't show SW1 (on/off), which is positioned after the reverse-polarity protection diode D2.

Schematic

I used hot-air for SMD soldering, and an iron with my favourite 2% Ag solder for through-hole components and wires.

build_top build_bottom

With stickers attached to the case:

build_case_top build_case_bottom

Credits and References