diff --git a/lib/CMT2300a/cmt2300a_params.h b/lib/CMT2300a/cmt2300a_params.h
index 39ae7b121..4e10f6a25 100644
--- a/lib/CMT2300a/cmt2300a_params.h
+++ b/lib/CMT2300a/cmt2300a_params.h
@@ -1,10 +1,97 @@
+/*
+;---------------------------------------
+;  CMT2300A Configuration File
+;  Generated by CMOSTEK RFPDK 1.46
+;  2023.03.17 23:16
+;---------------------------------------
+; Mode                      = Advanced
+; Part Number               = CMT2300A
+; Frequency                 = 860.000 MHz
+; Xtal Frequency            = 26.0000 MHz
+; Demodulation              = GFSK
+; AGC                       = On
+; Data Rate                 = 20.0 kbps
+; Deviation                 = 20.0 kHz
+; Tx Xtal Tol.              = 20 ppm
+; Rx Xtal Tol.              = 20 ppm
+; TRx Matching Network Type = 20 dBm
+; Tx Power                  = +13 dBm
+; Gaussian BT               = 0.5
+; Bandwidth                 = Auto-Select kHz
+; CDR Type                  = Counting
+; CDR DR Range              = NA
+; AFC                       = On
+; AFC Method                = Auto-Select
+; Data Representation       = 0:F-low 1:F-high
+; Rx Duty-Cycle             = Off
+; Tx Duty-Cycle             = Off
+; Sleep Timer               = Off
+; Sleep Time                = NA
+; Rx Timer                  = Off
+; Rx Time T1                = NA
+; Rx Time T2                = NA
+; Rx Exit State             = STBY
+; Tx Exit State             = STBY
+; SLP Mode                  = Disable
+; RSSI Valid Source         = PJD
+; PJD Window                = 8 Jumps
+; LFOSC Calibration         = On
+; Xtal Stable Time          = 155 us
+; RSSI Compare TH           = NA
+; Data Mode                 = Packet
+; Whitening                 = Disable
+; Whiten Type               = NA
+; Whiten Seed Type          = NA
+; Whiten Seed               = NA
+; Manchester                = Disable
+; Manchester Type           = NA
+; FEC                       = Enable
+; FEC Type                  = x^3+x^2+1
+; Tx Prefix Type            = 0
+; Tx Packet Number          = 1
+; Tx Packet Gap             = 32
+; Packet Type               = Variable Length
+; Node-Length Position      = First Node, then Length
+; Payload Bit Order         = Start from msb
+; Preamble Rx Size          = 2
+; Preamble Tx Size          = 30
+; Preamble Value            = 170
+; Preamble Unit             = 8-bit
+; Sync Size                 = 4-byte
+; Sync Value                = 1296587336
+; Sync Tolerance            = None
+; Sync Manchester           = Disable
+; Node ID Size              = NA
+; Node ID Value             = NA
+; Node ID Mode              = None
+; Node ID Err Mask          = Disable
+; Node ID Free              = Disable
+; Payload Length            = 32
+; CRC Options               = IBM-16
+; CRC Seed                  = 0 crc_seed
+; CRC Range                 = Entire Payload
+; CRC Swap                  = Start from MSB
+; CRC Bit Invert            = Normal
+; CRC Bit Order             = Start from bit 15
+; Dout Mute                 = Off
+; Dout Adjust Mode          = Disable
+; Dout Adjust Percentage    = NA
+; Collision Detect          = Off
+; Collision Detect Offset   = NA
+; RSSI Detect Mode          = At PREAM_OK
+; RSSI Filter Setting       = 32-tap
+; RF Performance            = High
+; LBD Threshold             = 2.4 V
+; RSSI Offset               = 0
+; RSSI Offset Sign          = 0
+*/
 #ifndef __CMT2300A_PARAMS_H
 #define __CMT2300A_PARAMS_H
 
 #include "cmt2300a_defs.h"
 #include <stdint.h>
 
-/* [CMT Bank] with RSSI offset of +- 0 (and 13dBm) */
+/* [CMT Bank] with RSSI offset of +- 0 (and Tx power double bit not set) */
 static uint8_t g_cmt2300aCmtBank[CMT2300A_CMT_BANK_SIZE] = {
 0x00,
 0x66,
@@ -118,8 +205,8 @@ static uint8_t g_cmt2300aTxBank[CMT2300A_TX_BANK_SIZE] = {
 0x07,
 0x50,
 0x00,
-0x42,
-0x0C,
+0x53,
+0x09,
 0x3F,
 0x7F,
 };