TBS5922 Fails to intialize dvb-usb: found a '(null)' in warm state. #96
Comments
|
Also, it's worth noting that the proprietary drivers work... albeit the tuner becoming unresponsive at times |
|
Hi, did you manage to fix this pls? I got the same after building on Ubuntu 17.10, kernel 4.13.0-37-generic, tried on both USB 2.0 and USB 3.0 controllers (with the same dmesg output): [ 358.961916] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5980.fw' (Similar to #108) |
crazycat69
pushed a commit
that referenced
this issue
May 26, 2019
If SSDT overlay is loaded via ConfigFS and then unloaded the device, we would like to have OF modalias for, already gone. Thus, acpi_get_name() returns no allocated buffer for such case and kernel crashes afterwards: ACPI: Host-directed Dynamic ACPI Table Unload ads7950 spi-PRP0001:00: Dropping the link to regulator.0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 80000000070d6067 P4D 80000000070d6067 PUD 70d0067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 40 Comm: kworker/u4:2 Not tainted 5.0.0+ #96 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:create_of_modalias.isra.1+0x4c/0x150 Code: 00 00 48 89 44 24 18 31 c0 48 8d 54 24 08 48 c7 44 24 10 00 00 00 00 48 c7 44 24 08 ff ff ff ff e8 7a b0 03 00 48 8b 4c 24 10 <0f> b6 01 84 c0 74 27 48 c7 c7 00 09 f4 a5 0f b6 f0 8d 50 20 f6 04 RSP: 0000:ffffa51040297c10 EFLAGS: 00010246 RAX: 0000000000001001 RBX: 0000000000000785 RCX: 0000000000000000 RDX: 0000000000001001 RSI: 0000000000000286 RDI: ffffa2163dc042e0 RBP: ffffa216062b1196 R08: 0000000000001001 R09: ffffa21639873000 R10: ffffffffa606761d R11: 0000000000000001 R12: ffffa21639873218 R13: ffffa2163deb5060 R14: ffffa216063d1010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa2163e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000007114000 CR4: 00000000001006f0 Call Trace: __acpi_device_uevent_modalias+0xb0/0x100 spi_uevent+0xd/0x40 ... In order to fix above let create_of_modalias() check the status returned by acpi_get_name() and bail out in case of failure. Fixes: 8765c5b ("ACPI / scan: Rework modalias creation when "compatible" is present") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201381 Reported-by: Ferry Toth <fntoth@gmail.com> Tested-by: Ferry Toth<fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 4.1+ <stable@vger.kernel.org> # 4.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
crazycat69
pushed a commit
that referenced
this issue
Jul 5, 2023
The ice driver caches next_to_clean value at the beginning of ice_clean_rx_irq() in order to remember the first buffer that has to be freed/recycled after main Rx processing loop. The end boundary is indicated by first descriptor of frame that Rx processing loop has ended its duties. Note that if mentioned loop ended in the middle of gathering multi-buffer frame, next_to_clean would be pointing to the descriptor in the middle of the frame BUT freeing/recycling stage will stop at the first descriptor. This means that next iteration of ice_clean_rx_irq() will miss the (first_desc, next_to_clean - 1) entries. When running various 9K MTU workloads, such splats were observed: [ 540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 540.787787] #PF: supervisor read access in kernel mode [ 540.793002] #PF: error_code(0x0000) - not-present page [ 540.798218] PGD 0 P4D 0 [ 540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G W 6.3.0-rc7+ #96 [ 540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice] [ 540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98 [ 540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282 [ 540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe [ 540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff [ 540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100 [ 540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004 [ 540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040 [ 540.890253] FS: 00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000 [ 540.898465] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0 [ 540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 540.926032] PKRU: 55555554 [ 540.928790] Call Trace: [ 540.931276] <TASK> [ 540.933418] ice_napi_poll+0x4ca/0x6d0 [ice] [ 540.937804] ? __pfx_ice_napi_poll+0x10/0x10 [ice] [ 540.942716] napi_busy_loop+0xd7/0x320 [ 540.946537] xsk_recvmsg+0x143/0x170 [ 540.950178] sock_recvmsg+0x99/0xa0 [ 540.953729] __sys_recvfrom+0xa8/0x120 [ 540.957543] ? do_futex+0xbd/0x1d0 [ 540.961008] ? __x64_sys_futex+0x73/0x1d0 [ 540.965083] __x64_sys_recvfrom+0x20/0x30 [ 540.969155] do_syscall_64+0x38/0x90 [ 540.972796] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 540.977934] RIP: 0033:0x7f6de5f27934 To fix this, set cached_ntc to first_desc so that at the end, when freeing/recycling buffers, descriptors from first to ntc are not missed. Fixes: 2fba7dc ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230531154457.3216621-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Driver compiles successfully on Kernel 4.8.13 but upon rebooting I get the following in dmesg
[ 5.059716] dvb-usb: found a '(null)' in cold state, will try to load a firmware
[ 5.060414] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5922.fw'
[ 5.066029] usb 1-6: USB disconnect, device number 4
[ 5.170013] dvb-usb: found a '(null)' in warm state.
[ 5.170021] dvb-usb: no i2c algorithm specified
[ 5.170027] dvb-usb: (null) error while loading driver (-22)
[ 5.170166] usbcore: registered new interface driver tbsqbox22
[ 6.846060] usb 1-6: new high-speed USB device number 6 using xhci_hcd
[ 7.015915] usb 1-6: New USB device found, idVendor=734c, idProduct=5922
[ 7.015918] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.015920] usb 1-6: Product: TBS 5922
[ 7.015921] usb 1-6: Manufacturer: TBS-Tech
[ 7.017073] dvb-usb: found a '(null)' in cold state, will try to load a firmware
[ 7.017076] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5922.fw'
[ 7.129806] dvb-usb: found a '(null)' in warm state.
[ 7.129812] dvb-usb: no i2c algorithm specified
[ 7.129851] dvb-usb: (null) error while loading driver (-22)
Needless to say that /dev/dvb doesn't exist. I'm using Fedora 23, but I also found a similar issue referenced in the Fedora Forums using a recent Kernel
https://forums.fedoraforum.org/showthread.php?316712-dvb-usb-no-i2c-algorithm-specified&p=1801140&posted=1#post1801140
The text was updated successfully, but these errors were encountered: