Skip to content
This repository

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
branch: master
Fetching contributors…

Cannot retrieve contributors at this time

file 117 lines (107 sloc) 4.569 kb
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117
/*
 * X carriage, lower section for Mendel
 * by Vik Olliver. Copyright (C) 2010 vik@diamondage.co.nz
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/

<mendel.inc>
<mendel.conf>

//rotate([0,0,90]) translate([-49,-54,0.5]) import_stl("x-carriage-lower_1off.stl");

x_car_bottom_height=16.5;
x_car_shelf_width=18;
x_car_lower_width=44;
x_centre_cavity_length=73;
x_centre_cavity_width=25;
x_centre_cavity_height=40;

wing_length=33;
wing_width=10;
wing_height=34.5;

module x_car_lower_block() {
union () {
difference () {
union (){
// Main block
difference () {
translate ([0,0,x_car_bottom_height/2]) box(x_car_length,x_car_lower_width,x_car_bottom_height);
translate ([0,x_car_lower_width/-2+9,x_car_bottom_height*1.2-2]) rotate ([-25,0,0])
box(x_car_length+2,x_car_shelf_width,x_car_bottom_height);
}
// Shelf
translate ([0,(x_car_lower_width+x_car_shelf_width)/-2,x_car_bottom_height/2]) difference () {
box(x_car_length,x_car_shelf_width,x_car_bottom_height);
translate ([0,0,x_car_bottom_height*0.8-1]) rotate ([25,0,0])
box(x_car_length+2,x_car_shelf_width*2,x_car_bottom_height);
}
}
// Cylindrical gap for rod.
translate ([0,x_car_lower_width/-2-3,x_car_bottom_height]) rotate ([0,90,0])
cylinder(h=x_car_length+2,r=7,center=true);
}
// WIng
translate ([5.5,(x_car_lower_width-wing_width)/-2-x_car_shelf_width-2,wing_height/2])
box(wing_length,wing_width,wing_height);
}
}


module cutouts() {
union () {
// Hole in da middle
translate([0,1,10])
box(x_centre_cavity_length,x_centre_cavity_width,x_centre_cavity_height);
// Hole to ease extruder fitting
translate ([x_car_wing_offset,1,10])
box(extruder_thick+2,x_centre_cavity_width+3,x_centre_cavity_height);
// Trimming side with 2 axles on.
translate ([0,x_car_lower_width/2,x_car_bottom_height]) rotate([0,90,0])
cylinder(h=x_car_length+1,r=5,center=true);
// Holes at distal X ends.
x_carriage_common_holes()
// Trimming of top edge
translate ([0,x_car_lower_width/2+1,x_car_bottom_height]) rotate ([90,0,0])
cylinder(h=x_car_length+2,r=3,center=true);
// Horizontal holes in wing. Lower:
translate([x_car_wing_offset+7,x_centre_cavity_width/-2-8,x_car_bottom_height/2-1]) rotate([90,-90,0])
m4_hole_horiz_with_hex(50);
translate([x_car_wing_offset-11.2,x_centre_cavity_width/-2-8,x_car_bottom_height/2-1]) rotate([90,-90,0])
m4_hole_horiz_with_hex(50);
// Horizontal holes in wing. Upper
translate([x_car_wing_offset+7,x_centre_cavity_width/-2-x_car_shelf_width,
x_car_bottom_height/2-1+x_belt_spacing])
rotate([90,-90,0]) m4_hole_horiz_with_hex(50);
translate([x_car_wing_offset-11.2,x_centre_cavity_width/-2-x_car_shelf_width,
x_car_bottom_height/2-1+x_belt_spacing])
rotate([90,-90,0]) m4_hole_horiz_with_hex(50);
// Horizontal axles
translate ([x_car_bottom_axle_offset+9,x_centre_cavity_width/2+4,x_car_bottom_height/2-1.5])
rotate ([-90,-90,0]) m4_hole_horiz_with_hex(12);
translate ([-x_car_bottom_axle_offset-9,x_centre_cavity_width/2+4,x_car_bottom_height/2-1.5])
rotate ([-90,-90,0]) m4_hole_horiz_with_hex(12);
// Hole to access extruder nut.
translate ([x_car_wing_offset,extruder_mount_hole_spacing/-2,15]) scale(1.1) m4_hole_vert_with_hex(30);
// Angled axes
translate ([x_car_bottom_axle_offset,x_car_lower_width/-2-1.5,-1.5]) rotate ([-30,0,0]) m4_hole_vert(40);
translate ([-x_car_bottom_axle_offset,x_car_lower_width/-2-1.5,-1.5]) rotate ([-30,0,0]) m4_hole_vert(40);
translate ([x_car_length/-2+8,(x_car_lower_width+x_car_shelf_width*0.6)/-2,-1.5]) rotate ([30,0,0])
m4_hole_vert(40);
translate ([x_car_length/2-8,(x_car_lower_width+x_car_shelf_width*0.6)/-2,-1.5]) rotate ([30,0,0])
m4_hole_vert(40);
}
}


module x_carriage_lower() {
difference () {
x_car_lower_block();
cutouts();
}
}

x_carriage_lower();
Something went wrong with that request. Please try again.