Skip to content
Fetching contributors…
Cannot retrieve contributors at this time
210 lines (207 sloc) 11.9 KB
;; This is an annotated example of the options that may be set in a
;; project.clj file. It is a fairly contrived example in order to
;; cover all options exhaustively; it shouldn't be considered a
;; representative configuration. For a more detailed explanation of
;; some of the terms run "lein help tutorial".
;; The project is named "sample", and its group-id is "org.example".
(defproject org.example/sample "1.0.0-SNAPSHOT" ; version "1.0.0-SNAPSHOT"
;; Beyond this point you may prepend a form with unquote, or ~, to eval it.
;; The descrption text is searchable from repositories like Clojars.
:description "A sample project"
:url ""
;; The mailing list of the project. If the project has multiple mailing
;; lists, use the :mailing-lists key (bound to a seq of mailing list
;; descriptions as below).
:mailing-list {:name "sample mailing list"
:archive ""
:other-archives [""
:post ""
:subscribe ""
:unsubscribe ""}
;; The project's license. :distribution should be :repo or :manual;
;; :repo means it is ok for public repositories to host this project's
;; artifacts. A seq of :licenses is also supported.
:license {:name "Eclipse Public License - v 1.0"
:url ""
:distribution :repo
:comments "same as Clojure"}
;; Dependencies are listed as [group-id/name version].
:dependencies [[org.clojure/clojure "1.3.0"]
[org.jclouds/jclouds "1.0" :classifier "jdk15" :scope "test"]
[net.sf.ehcache/ehcache "2.3.1" :extension "pom"]
[log4j "1.2.15" :exclusions [[javax.mail/mail :extension "jar"]
[javax.jms/jms :classifier "*"]
;; Global exclusions are applied across the board, as an alternative
;; to duplication for multiple depedencies with the same excluded libraries.
:exclusions [org.apache.poi/poi
;; Plugins are code that runs in Leiningen itself and usually
;; provides new tasks or hooks.
:plugins [[lein-pprint "1.1.1"]
[lein-assoc "0.1.0"]
[s3-wagon-private "1.1.1"]]
;; Each active profile gets merged into the project map. The :dev
;; and :user profiles are active by default, but the latter should be
;; looked up in ~/.lein/profiles.clj rather than set in project.clj.
;; Use the with-profiles higher-order task to run a task with a
;; different set of active profiles.
:profiles {:dev {:resource-paths ["dummy-data"]
:dependencies [[clj-stacktrace "0.2.4"]]}
:debug {:debug true
:injections [(prn (into {} (System/getProperties)))]}
:1.4 {:dependencies [[org.clojure/clojure "1.4.0-alpha1"]]}}
;; Support project-specific task aliases. These are interpreted in
;; the same way as command-line arguments to the lein command. If
;; the alias points to a vector, it uses partial application. For
;; example, "lein with-magic run -m hi.core" would be equivalent to
;; "lein assoc :magic true run -m hi.core".
:aliases {"launch" "run"
"with-magic" ["assoc" ":magic" "true"]}
;; Normally Leiningen runs the javac and compile tasks before
;; calling any eval-in-project code, but you can override this with
;; the :prep-tasks key to do other things like compile protocol buffers.
:prep-tasks ["protoc" "compile"]
;; Warns users of earlier versions of Leiningen.
:min-lein-version "2.0.0"
;; Paths to include on the classpath from each project in the
;; checkouts/ directory. (See the FAQ in the Readme for more details
;; about checkout dependencies.) Set this to be a vector of
;; functions that take the target project as argument. Defaults to
;; [:source-paths :compile-path :resource-paths], but you could use
;; the following to share code from the test suite:
:checkout-deps-shares [:source-paths :test-paths
~(fn [p] (str (:root p) "/lib/dev/*"))]
;; Load these namespaces on startup to pick up hooks from them.
:hooks [leiningen.hooks.difftest]
;; Predicates to determine whether to run a test or not. See tutorial.
:test-selectors {:default (fn [t] (not (or (:integration v) (:regression v))))
:integration :integration
:regression :regression}
;; These namespaces will be AOT-compiled. Needed for gen-class and
;; other Java interop functionality. Put a regex here to compile all
;; namespaces whose names match.
:aot [org.example.sample]
;; The -main function in this namespace will be run at launch if you
;; create an uberjar. Set :skip-aot metadata on this symbol to use
;; it for other things like the run task or shell wrappers without
;; bringing in AOT if you don't need an executable uberjar.
:main org.example.sample
;; Options to change the way the REPL behaves
:repl-options {;; Specify the string to print when prompting for input.
;; defaults to something like (fn [ns] (str *ns* "=> "))
:prompt (fn [ns] (str "your command for <" ns ">, master? " ))
;; Specify the ns to start the REPL in (overrides :main in
;; this case only)
;; This expression will run when first opening a REPL, in the
;; namespace from :init-ns or :main if specified
:init (println "here we are in" *ns*)
;; Customize the socket the repl task listens on and
;; attaches to.
:host ""
:port 4001
;; If nREPL takes too long to load it may timeout,
;; increase this to wait longer before timing out.
;; Defaults to 30000 (30 seconds)
:timeout 40000}
;; Forms to prepend to every form that is evaluated inside your project.
;; Allows working around the Gilardi Scenario:
:injections [(require 'clojure.pprint)]
;; Emit warnings on all reflection calls.
:warn-on-reflection true
;; Set this in order to only use the :repositories you list below.
:omit-default-repositories true
;; These repositories will be searched for :dependencies and
;; :plugins and will also be available to deploy to.
:repositories {"" ""
{:url ""
;; If a repository contains releases only; setting :snapshots
;; to false will speed up dependency checking.
:snapshots false
;; You can also set the policies for how to handle :checksum
;; failures to :fail, :warn, or :ignore. In :releases, :daily,
;; :always, and :never are supported.
:releases {:checksum :fail :update :always}
;; You can set :checksum and :update here for them
;; to apply to both :releases and :snapshots:
:update :always, :checksum :fail}
;; Repositories named "snapshots" and "releases" automatically
;; have their :snapshots and :releases disabled as appropriate.
;; Credentials for repositories should *not* be stored
;; in project.clj but in ~/.lein/profiles.clj instead:
;; {:auth {:repository-auth {#""
;; {:username "milgrim"
;; :password "locative.1"}}}}
"snapshots" ""
"releases" ""}
;; You can set :update and :checksum policies here to have them
;; apply for all :repositories. Usually you will not set :update
;; directly but apply the "update" profile instead.
:update :always
;; the deploy task will give preference to repositories specified in
;; :deploy-repositories, and repos listed there will not be used for
;; dependency resolution.
:deploy-repositories {"releases" ""
"snapshots" ""}
;; Prevent Leiningen from checking the network for dependencies.
;; This wouldn't normally be set in project.clj; it would come from a profile.
:offline? true
;; Override the location of the local maven repository.
:local-repo "/home/dude/.lein/repo"
;; If you'd rather use a different directory structure, you can set these.
;; Paths that contain "inputs" are vectors, "outputs" are strings.
:source-paths ["src" "src/main/clojure"]
:java-source-paths ["src/main/java"] ; Java source is stored separately.
:test-paths ["test" "src/test/clojure"]
:resource-paths ["src/main/resource"] ; non-code files included in classpath/jar
:compile-path "target/classes" ; for .class files
:native-path "src/native" ; where to extract native dependencies
:target-path "target/" ; where to place the project's jar file
:jar-name "sample.jar" ; name of the jar produced by 'lein jar'
:uberjar-name "sample-standalone.jar" ; as above for uberjar
;; Options to pass to java compiler for java source
;; See
:javac-options [:destdir "classes/"]
;; Leave the contents of :source-paths out of jars (for AOT projects)
:omit-source true
;; Files with names matching any of these patterns will be excluded from jars
:jar-exclusions [#"(?:^|/).svn/"]
;; Same thing, but for uberjars.
:uberjar-exclusions [#"META-INF/DUMMY.SF"]
;; Add arbitrary jar entries. Supports :path, :paths, :bytes, and :fn types.
:filespecs [{:type :path :path "config/base.clj"}
;; directory paths are included recursively
{:type :paths :paths ["config/web" "config/cli"]}
;; programmatically-generated content can use :bytes
{:type :bytes :path "project.clj"
;; strings or byte arrays are accepted
:bytes ~(slurp "project.clj")}
;; :fn filespecs take the project as an argument and
;; should return a filespec map of one of the other types.
{:type :fn :fn (fn [p]
{:type :bytes :path "git-log"
:bytes (:out (
"git" "log" "-n" "1"))})}]
;; Set arbitrary key/value pairs for the jar's manifest.
:manifest {"Project-awesome-level" "super-great"
;; function values will be called with the project as an argument.
"Class-Path" ~#(clojure.string/join
(leiningen.core.classpath/get-classpath %))
;; symbol values will be resolved to find a function to call.
"Grunge-level" my.plugin/calculate-grunginess}
;; You can set JVM-level options here.
:jvm-opts ["-Xmx1g"]
;; Control the context in which your project code is evaluated.
;; Defaults to :subprocess, but can also be :leiningen (for plugins)
;; or :classloader (experimental) to avoid starting a subprocess.
:eval-in :leiningen
;; Set parent for working with in a multi-module maven project
:parent [org.example/parent "0.0.1" :relative-path "../parent/pom.xml"]
;; Extensions here will be propagated to the pom but not used by Leiningen.
:extensions [[org.apache.maven.wagon/wagon-webdav "1.0-beta-2"]
[foo/bar-baz "1.0"]])
Something went wrong with that request. Please try again.