Permalink
Switch branches/tags
Nothing to show
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
190 lines (161 sloc) 3.55 KB
// http://arduinolearning.com/code/ht1621-6-digit-7-segment-display-example.php
// small changes by Nicu FLORICA (niq_ro) - http://www.arduinotehniq.com
#define CS 13 //Pin 2 as chip selection output
#define WR 12 //Pin 3 as read clock output
#define DATA 7 //Pin 4 as Serial data output
#define CS1 digitalWrite(CS, HIGH)
#define CS0 digitalWrite(CS, LOW)
#define WR1 digitalWrite(WR, HIGH)
#define WR0 digitalWrite(WR, LOW)
#define DATA1 digitalWrite(DATA, HIGH)
#define DATA0 digitalWrite(DATA, LOW)
#define sbi(x, y) (x |= (1 << y))
#define cbi(x, y) (x &= ~(1 <<y ))
#define uchar unsigned char
#define uint unsigned int
#define ComMode 0x52
#define RCosc 0x30
#define LCD_on 0x06
#define LCD_off 0x04
#define Sys_en 0x02
#define CTRl_cmd 0x80
#define Data_cmd 0xa0
/*0,1,2,3,4,5,6,7,8,9,A,b,C,c,d,E,F,H,h,L,n,N,o,P,r,t,U,-, ,*/
const char num[]={0x7D,0x60,0x3E,0x7A,0x63,0x5B,0x5F,0x70,0x7F,0x7B,0x77,0x4F,0x1D,0x0E,0x6E,0x1F,0x17,0x67,0x47,0x0D,0x46,0x75,0x37,0x06,0x0F,0x6D,0x02,0x00,0x33};
char dispnum[6]={0x00,0x00,0x00,0x00,0x00,0x00};
void SendBit_1621(uchar sdata,uchar cnt)
{
uchar i;
for(i=0;i<cnt;i++)
{
WR0;
if(sdata&0x80) DATA1;
else DATA0;
WR1;
sdata<<=1;
}
}
void SendCmd_1621(uchar command)
{
CS0;
SendBit_1621(0x80,4);
SendBit_1621(command,8);
CS1;
}
void Write_1621(uchar addr,uchar sdata)
{
addr<<=2;
CS0;
SendBit_1621(0xa0,3);
SendBit_1621(addr,6);
SendBit_1621(sdata,8);
CS1;
}
void HT1621_all_off(uchar num)
{
uchar i;
uchar addr=0;
for(i=0;i<num;i++)
{
Write_1621(addr,0x00);
addr+=2;
}
}
void HT1621_all_on(uchar num)
{
uchar i;
uchar addr=0;
for(i=0;i<num;i++)
{
Write_1621(addr,0xff);
addr+=2;
}
}
void Init_1621(void)
{
SendCmd_1621(Sys_en);
SendCmd_1621(RCosc);
SendCmd_1621(ComMode);
SendCmd_1621(LCD_on);
}
void displaydata(int p)
{
uchar i=0;
switch(p)
{
case 1:
sbi(dispnum[0],7);
break;
case 2:
sbi(dispnum[1],7);
break;
case 3:
sbi(dispnum[2],7);
break;
default:break;
}
for(i=0;i<=5;i++)
{
Write_1621(i*2,dispnum[i]);
}
}
void setup() {
pinMode(CS, OUTPUT); //
pinMode(WR, OUTPUT); //
pinMode(DATA, OUTPUT); //
CS1;
DATA1;
WR1;
delay(50);
Init_1621();
HT1621_all_on(16);
delay(1000);
HT1621_all_off(16);
delay(1000);
displaydata(1);//light on the first decimal point starting from the right side
delay(1000);
dispnum[5]=num[5];
dispnum[4]=num[4];
dispnum[3]=num[3];
dispnum[2]=num[2];
dispnum[1]=num[1];
dispnum[0]=num[0];
sbi(dispnum[5],7);
//cbi(dispnum[5],7);
sbi(dispnum[4],7);
//cbi(dispnum[4],7);
sbi(dispnum[3],7);
//cbi(dispnum[3],7);
delay(1000);
Write_1621(0,num[0]); //0
Write_1621(2,num[1]); //1
Write_1621(4,num[2]); //2
Write_1621(6,num[3]); //3
Write_1621(8,num[4]); //4
Write_1621(10,num[5]); //5
delay(1000);
HT1621_all_off(10);
delay(1000);
}
void loop() {
// put your main code here, to run repeatedly:
HT1621_all_off(10);
Write_1621(0,num[5]);
Write_1621(2,num[4]);
Write_1621(6,num[3]);
Write_1621(8,num[2]);
for (int i=0; i <= 4; i++)
{
Write_1621(4,num[26]); // -
delay(1000);
Write_1621(4,num[27]); // empty space
delay(1000);
}
HT1621_all_off(16);
delay(1000);
Write_1621(6,num[1]);
Write_1621(4,num[7]);
Write_1621(2,num[28]); // degree
Write_1621(0,num[12]); // C
delay(2000);
}