If you ever flashed an Android phone, this should be even easier:
- Get required tools: you need fastboot installed in your pinephone
- Debian/Ubuntu based distros:
apt install android-tools-fastboot- OR
apt install fastboot - postmarketOS / Alpine:
apk add android-tools - Arch/Manjaro:
pacman -S android-tools
- Get latest release from Github
- Unpack the
package.tar.gzfile in some directory:tar xzvf package.tar.gz - Execute the script included in the file:
./flashall- If the modem doesn't disappear when the script starts, try running the flashall script as root
- Wait for the modem to come back
If your Pinephone / Pro came with a really old stock firmware, you might need to update it
- ADSP Version 01.002.01.002
- ADSP Version 01.003.01.003
- ADSP Version 30.004.30.004
- ADSP Version 30.006.30.006
- Open a root terminal and run:
echo -ne "AT+QFASTBOOT\r" > /dev/ttyUSB2to enter fastboot mode - Run
fastboot flash modem NON-HLOS.ubi && fastboot reboot
- Get required tools: you need adb and fastboot installed in your pinephone
- Debian/Ubuntu based distros:
apt install android-tools-adb android-tools-fastboot- OR
apt install adb fastboot - postmarketOS / Alpine:
apk add android-tools - Arch/Manjaro:
pacman -S android-tools
- Grab a copy of the firmware, and, optionally, a recovery firmware (https://github.com/Biktorgj/quectel_eg25_recovery)
- With the modem active, jump to fastboot mode:
- As root, tell the modem to shutdown and enter fastboot mode:
echo -ne "AT+QFASTBOOT\r" > /dev/ttyUSB2- If the AT interface is not available, you can also do it from ADB:
- If running stock:
adb reboot bootloader
- If running stock:
- If already running this firmware:
adb shell reboot; fastboot oem stay
- If the AT interface is not available, you can also do it from ADB:
- After a bit, if you run
lsusbyou should see the modem in fastboot mode:
Bus 003 Device 005: ID 18d1:d00d Google Inc. Xiaomi Mi/Redmi 2 (fastboot)
- Once in fastboot mode, first flash the unlocked bootloader:
fastboot flash aboot appsboot.mbn- After that
fastboot reboot ; fastboot oem stay
- After flashing and rebooting to the bootloader the modem will say
FAILED (remote: 'Waiting for orders!') - Now you can flash everything:
fastboot flash boot boot-mdm9607.img- If you get an error flashing the kernel, run fastboot flash:raw :
fastboot flash:raw boot boot-mdm9607.img
- If you get an error flashing the kernel, run fastboot flash:raw :
fastboot flash recovery boot-mdm9607.imgfastboot flash system rootfs-mdm9607.ubifastboot flash recoveryfs recoveryfs.ubi
- After you flashed everything, you can run 'fastboot reboot' and wait for it to come back (you might have to run
fastboot reboottwice to clear Quectel's bootloader flags). - If all has gone well, to enable
adbyou will likely need to send the "AT+ADBON" command to the modem.