Bluetooth monitor ver 5.50 = Note: Linux version 4.19.97-v7l+ (armv7l) 0.592783 = Note: Bluetooth subsystem version 2.22 0.592791 = New Index: DC:A6:32:0D:EA:B9 (Primary,UART,hci2) [hci2] 0.592794 = Open Index: DC:A6:32:0D:EA:B9 [hci2] 0.592797 = Index Info: DC:A6:32:0.. (Cypress Semiconductor Corporation) [hci2] 0.592802 = New Index: 00:15:83:EF:21:57 (Primary,USB,hci1) [hci1] 0.592804 = Open Index: 00:15:83:EF:21:57 [hci1] 0.592808 = Index Info: 00:15:83:EF:21:57 (Cambridge Silicon Radio) [hci1] 0.592809 = New Index: 00:15:83:D1:1C:52 (Primary,USB,hci0) [hci0] 0.592811 = Open Index: 00:15:83:D1:1C:52 [hci0] 0.592813 = Index Info: 00:15:83:D1:1C:52 (Cambridge Silicon Radio) [hci0] 0.592815 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.592818 @ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.592862 = bluetoothd: Endpoint unregistered: sender=:1.7 path=/org/bluez/h.. 7.673847 = bluetoothd: Endpoint unregistered: sender=:1.7 path=/org/bluez/h.. 7.673918 = bluetoothd: Endpoint unregistered: sender=:1.7 path=/org/bluez/h.. 7.673949 = bluetoothd: Endpoint unregistered: sender=:1.7 path=/org/bluez/h.. 7.673979 = bluetoothd: Endpoint unregistered: sender=:1.7 path=/org/bluez/h.. 7.674008 = bluetoothd: Endpoint unregistered: sender=:1.7 path=/org/bluez/h.. 7.674037 @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci0] 7.672008 UUID: 0000110a-0000-1000-8000-00805f9b34fb < HCI Command: Write Class of Device (0x03|0x0024) plen 3 #1 [hci0] 7.672043 Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 7.673682 Write Class of Device (0x03|0x0024) ncmd 1 Status: Success (0x00) @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0002} [hci0] 7.673712 Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0001} [hci0] 7.673712 Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) < HCI Command: Write Extended Inqu.. (0x03|0x0052) plen 241 #3 [hci0] 7.673740 FEC: Not required (0x00) Name (complete): raspberrypi #1 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 4 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) Headset AG (0x1112) Handsfree Audio Gateway (0x111f) = bluetoothd: Terminating 7.676254 > HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 7.678690 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 7.678731 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci1] 7.678891 UUID: 0000110a-0000-1000-8000-00805f9b34fb < HCI Command: Write Class of Device (0x03|0x0024) plen 3 #1 [hci1] 7.678922 Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci1] 7.680806 Write Class of Device (0x03|0x0024) ncmd 1 Status: Success (0x00) @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0002} [hci1] 7.680837 Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0001} [hci1] 7.680837 Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) < HCI Command: Write Extended Inqu.. (0x03|0x0052) plen 241 #3 [hci1] 7.680865 FEC: Not required (0x00) Name (complete): raspberrypi TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 4 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) Headset AG (0x1112) Handsfree Audio Gateway (0x111f) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci1] 7.685807 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci1] 7.685835 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci1] 7.685971 UUID: 00001112-0000-1000-8000-00805f9b34fb < HCI Command: Write Extended Inqu.. (0x03|0x0052) plen 241 #5 [hci1] 7.686007 FEC: Not required (0x00) Name (complete): raspberrypi TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 3 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) Handsfree Audio Gateway (0x111f) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci1] 7.690806 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci1] 7.690833 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci0] 7.690960 UUID: 00001112-0000-1000-8000-00805f9b34fb < HCI Command: Write Extended Inqu.. (0x03|0x0052) plen 241 #5 [hci0] 7.690984 FEC: Not required (0x00) Name (complete): raspberrypi #1 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 3 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) Handsfree Audio Gateway (0x111f) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 7.696684 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 7.696726 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x400000 Major class: Miscellaneous Minor class: 0x00 Telephony (Cordless telephony, Modem, Headset) @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci2] 7.696897 UUID: 00001112-0000-1000-8000-00805f9b34fb < HCI Command: Write Extended Inqu.. (0x03|0x0052) plen 241 #1 [hci2] 7.696926 FEC: Not required (0x00) Name (complete): raspberrypi #3 TX power: 0 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 4 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) Handsfree Audio Gateway (0x111f) Audio Source (0x110a) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci2] 7.698103 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci2] 7.698133 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x480000 Major class: Miscellaneous Minor class: 0x00 Capturing (Scanner, Microphone) Telephony (Cordless telephony, Modem, Headset) @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci1] 7.698279 UUID: 0000111f-0000-1000-8000-00805f9b34fb < HCI Command: Write Class of Device (0x03|0x0024) plen 3 #7 [hci1] 7.698304 Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 > HCI Event: Command Complete (0x0e) plen 4 #8 [hci1] 7.699810 Write Class of Device (0x03|0x0024) ncmd 1 Status: Success (0x00) @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0002} [hci1] 7.699835 Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0001} [hci1] 7.699835 Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 < HCI Command: Write Extended Inqu.. (0x03|0x0052) plen 241 #9 [hci1] 7.699862 FEC: Not required (0x00) Name (complete): raspberrypi TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 2 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 #10 [hci1] 7.704827 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci1] 7.704875 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci0] 7.710937 UUID: 0000111f-0000-1000-8000-00805f9b34fb < HCI Command: Write Class of Device (0x03|0x0024) plen 3 #7 [hci0] 7.710969 Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 > HCI Event: Command Complete (0x0e) plen 4 #8 [hci0] 7.713686 Write Class of Device (0x03|0x0024) ncmd 1 Status: Success (0x00) @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0002} [hci0] 7.713718 Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0001} [hci0] 7.713718 Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 < HCI Command: Write Extended Inqu.. (0x03|0x0052) plen 241 #9 [hci0] 7.713746 FEC: Not required (0x00) Name (complete): raspberrypi #1 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 2 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 #10 [hci0] 7.718695 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 7.718755 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci2] 7.719064 UUID: 0000111f-0000-1000-8000-00805f9b34fb < HCI Command: Write Class of Device (0x03|0x0024) plen 3 #3 [hci2] 7.719122 Class: 0x080000 Major class: Miscellaneous Minor class: 0x00 Capturing (Scanner, Microphone) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci2] 7.719434 Write Class of Device (0x03|0x0024) ncmd 1 Status: Success (0x00) @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0002} [hci2] 7.719488 Class: 0x080000 Major class: Miscellaneous Minor class: 0x00 Capturing (Scanner, Microphone) @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0001} [hci2] 7.719488 Class: 0x080000 Major class: Miscellaneous Minor class: 0x00 Capturing (Scanner, Microphone) < HCI Command: Write Extended Inqu.. (0x03|0x0052) plen 241 #5 [hci2] 7.719515 FEC: Not required (0x00) Name (complete): raspberrypi #3 TX power: 0 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 3 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) Audio Source (0x110a) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci2] 7.720730 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci2] 7.720763 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x080000 Major class: Miscellaneous Minor class: 0x00 Capturing (Scanner, Microphone) @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci2] 7.720917 UUID: 0000110a-0000-1000-8000-00805f9b34fb < HCI Command: Write Class of Device (0x03|0x0024) plen 3 #7 [hci2] 7.720944 Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 > HCI Event: Command Complete (0x0e) plen 4 #8 [hci2] 7.721225 Write Class of Device (0x03|0x0024) ncmd 1 Status: Success (0x00) @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0002} [hci2] 7.721245 Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Event: Class Of Device Changed (0x0007) plen 3 {0x0001} [hci2] 7.721245 Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 < HCI Command: Write Extended Inqu.. (0x03|0x0052) plen 241 #9 [hci2] 7.721270 FEC: Not required (0x00) Name (complete): raspberrypi #3 TX power: 0 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 2 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 #10 [hci2] 7.722445 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci2] 7.722477 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci1] 7.722648 Powered: Disabled (0x00) @ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci1] 7.722690 Set Powered (0x0005) plen 4 Status: Success (0x00) Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci1] 7.722696 Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections = Close Index: 00:15:83:EF:21:57 [hci1] 7.722728 @ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci0] 7.722918 Powered: Disabled (0x00) @ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 7.722958 Set Powered (0x0005) plen 4 Status: Success (0x00) Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 7.722965 Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections = Close Index: 00:15:83:D1:1C:52 [hci0] 7.722988 @ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci2] 7.723111 Powered: Disabled (0x00) @ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci2] 7.723313 Set Powered (0x0005) plen 4 Status: Success (0x00) Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci2] 7.723322 Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections < HCI Command: Reset (0x03|0x0003) plen 0 #11 [hci2] 7.723361 > HCI Event: Command Complete (0x0e) plen 4 #12 [hci2] 7.726727 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) = Close Index: DC:A6:32:0D:EA:B9 [hci2] 7.726776 @ MGMT Close: bluetoothd {0x0001} 7.728344 = bluetoothd: Stopping SDP server 7.729201 = bluetoothd: Exit 7.729261 = bluetoothd: Bluetooth daemon 5.50 8.616353 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 8.620682 = bluetoothd: Starting SDP server 8.622419 @ MGMT Command: Read Management Version In.. (0x0001) plen 0 {0x0001} 8.627236 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} 8.627254 Read Management Version Information (0x0001) plen 3 Status: Success (0x00) Version: 1.14 = bluetoothd: Bluetooth management interface 1.14 initialized 8.629832 @ MGMT Command: Read Management Supported... (0x0002) plen 0 {0x0001} 8.627454 @ MGMT Event: Command Complete (0x0001) plen 207 {0x0001} 8.627468 Read Management Supported Commands (0x0002) plen 204 Status: Success (0x00) Commands: 65 Read Controller Index List (0x0003) Read Controller Information (0x0004) Set Powered (0x0005) Set Discoverable (0x0006) Set Connectable (0x0007) Set Fast Connectable (0x0008) Set Bondable (0x0009) Set Link Security (0x000a) Set Secure Simple Pairing (0x000b) Set High Speed (0x000c) Set Low Energy (0x000d) Set Device Class (0x000e) Set Local Name (0x000f) Add UUID (0x0010) Remove UUID (0x0011) Load Link Keys (0x0012) Load Long Term Keys (0x0013) Disconnect (0x0014) Get Connections (0x0015) PIN Code Reply (0x0016) PIN Code Negative Reply (0x0017) Set IO Capability (0x0018) Pair Device (0x0019) Cancel Pair Device (0x001a) Unpair Device (0x001b) User Confirmation Reply (0x001c) User Confirmation Negative Reply (0x001d) User Passkey Reply (0x001e) User Passkey Negative Reply (0x001f) Read Local Out Of Band Data (0x0020) Add Remote Out Of Band Data (0x0021) Remove Remote Out Of Band Data (0x0022) Start Discovery (0x0023) Stop Discovery (0x0024) Confirm Name (0x0025) Block Device (0x0026) Unblock Device (0x0027) Set Device ID (0x0028) Set Advertising (0x0029) Set BR/EDR (0x002a) Set Static Address (0x002b) Set Scan Parameters (0x002c) Set Secure Connections (0x002d) Set Debug Keys (0x002e) Set Privacy (0x002f) Load Identity Resolving Keys (0x0030) Get Connection Information (0x0031) Get Clock Information (0x0032) Add Device (0x0033) Remove Device (0x0034) Load Connection Parameters (0x0035) Read Unconfigured Controller Index List (0x0036) Read Controller Configuration Information (0x0037) Set External Configuration (0x0038) Set Public Address (0x0039) Start Service Discovery (0x003a) Read Local Out Of Band Extended Data (0x003b) Read Extended Controller Index List (0x003c) Read Advertising Features (0x003d) Add Advertising (0x003e) Remove Advertising (0x003f) Get Advertising Size Information (0x0040) Start Limited Discovery (0x0041) Read Extended Controller Information (0x0042) Set Appearance (0x0043) Events: 35 Controller Error (0x0003) Index Added (0x0004) Index Removed (0x0005) New Settings (0x0006) Class Of Device Changed (0x0007) Local Name Changed (0x0008) New Link Key (0x0009) New Long Term Key (0x000a) Device Connected (0x000b) Device Disconnected (0x000c) Connect Failed (0x000d) PIN Code Request (0x000e) User Confirmation Request (0x000f) User Passkey Request (0x0010) Authentication Failed (0x0011) Device Found (0x0012) Discovering (0x0013) Device Blocked (0x0014) Device Unblocked (0x0015) Device Unpaired (0x0016) Passkey Notify (0x0017) New Identity Resolving Key (0x0018) New Signature Resolving Key (0x0019) Device Added (0x001a) Device Removed (0x001b) New Connection Parameter (0x001c) Unconfigured Index Added (0x001d) Unconfigured Index Removed (0x001e) New Configuration Options (0x001f) Extended Index Added (0x0020) Extended Index Removed (0x0021) Local Out Of Band Extended Data Updated (0x0022) Advertising Added (0x0023) Advertising Removed (0x0024) Extended Controller Information Changed (0x0025) @ MGMT Command: Read Controller Index List (0x0003) plen 0 {0x0001} 8.627535 @ MGMT Event: Command Complete (0x0001) plen 11 {0x0001} 8.627543 Read Controller Index List (0x0003) plen 8 Status: Success (0x00) Controllers: 3 hci2 hci1 hci0 @ MGMT Command: Read Controller Inf.. (0x0004) plen 0 {0x0001} [hci2] 8.627615 @ MGMT Event: Command Complete (0x0001) plen 283 {0x0001} [hci2] 8.627628 Read Controller Information (0x0004) plen 280 Status: Success (0x00) Address: DC:A6:32:0D:EA:B9 (OUI DC-A6-32) Version: Bluetooth 5.0 (0x09) Manufacturer: Cypress Semiconductor Corporation (305) Supported settings: 0x0001bfff Powered Connectable Fast Connectable Discoverable Bondable Link Security Secure Simple Pairing BR/EDR High Speed Low Energy Advertising Secure Connections Debug Keys Privacy Static Address Unknown settings (0x00010000) Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 Name: raspberrypi #3 Short name: = bluetoothd: Sap driver initialization failed. 8.630891 = bluetoothd: sap-server: Operation not permitted (1) [hci2] 8.630953 @ MGMT Command: Read Controller Inf.. (0x0004) plen 0 {0x0001} [hci1] 8.628787 @ MGMT Event: Command Complete (0x0001) plen 283 {0x0001} [hci1] 8.628806 Read Controller Information (0x0004) plen 280 Status: Success (0x00) Address: 00:15:83:EF:21:57 (IVT corporation) Version: Bluetooth 4.0 (0x06) Manufacturer: Cambridge Silicon Radio (10) Supported settings: 0x0001bfff Powered Connectable Fast Connectable Discoverable Bondable Link Security Secure Simple Pairing BR/EDR High Speed Low Energy Advertising Secure Connections Debug Keys Privacy Static Address Unknown settings (0x00010000) Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 Name: raspberrypi Short name: = bluetoothd: Sap driver initialization failed. 8.651371 = bluetoothd: sap-server: Operation not permitted (1) #10 [hci1] 8.651482 @ MGMT Command: Read Controller Inf.. (0x0004) plen 0 {0x0001} [hci0] 8.629927 @ MGMT Event: Command Complete (0x0001) plen 283 {0x0001} [hci0] 8.629957 Read Controller Information (0x0004) plen 280 Status: Success (0x00) Address: 00:15:83:D1:1C:52 (IVT corporation) Version: Bluetooth 4.0 (0x06) Manufacturer: Cambridge Silicon Radio (10) Supported settings: 0x0001bfff Powered Connectable Fast Connectable Discoverable Bondable Link Security Secure Simple Pairing BR/EDR High Speed Low Energy Advertising Secure Connections Debug Keys Privacy Static Address Unknown settings (0x00010000) Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 Name: raspberrypi #1 Short name: = bluetoothd: Sap driver initialization failed. 8.652271 = bluetoothd: sap-server: Operation not permitted (1) [hci0] 8.652339 @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci2] 8.632108 UUID: 00000000-0000-0000-0000-000000000000 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci2] 8.632129 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Remove Device (0x0034) plen 7 {0x0001} [hci2] 8.632211 BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci2] 8.632226 Remove Device (0x0034) plen 7 Status: Success (0x00) BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Command: Set Privacy (0x002f) plen 17 {0x0001} [hci2] 8.632464 Privacy: Disabled (0x00) Key: 00000000000000000000000000000000 @ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci2] 8.632476 Set Privacy (0x002f) plen 4 Status: Success (0x00) Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Command: Read Advertising Fe.. (0x003d) plen 0 {0x0001} [hci2] 8.632568 @ MGMT Event: Command Complete (0x0001) plen 11 {0x0001} [hci2] 8.632575 Read Advertising Features (0x003d) plen 8 Status: Success (0x00) Flags: 0x0000006f Switch into Connectable mode Advertise as Discoverable Advertise as Limited Discoverable Add Flags field to Advertising Data Add Appearance field to Scan Response Add Local Name in Scan Response Advertising data length: 31 Scan response length: 31 Max instances: 5 Instances: 0 @ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci2] 8.632649 Powered: Enabled (0x01) = Open Index: DC:A6:32:0D:EA:B9 #12 [hci2] 8.632687 < HCI Command: Read Local Supported.. (0x04|0x0003) plen 0 #13 [hci2] 8.632720 > HCI Event: Command Complete (0x0e) plen 12 #14 [hci2] 8.633109 Read Local Supported Features (0x04|0x0003) ncmd 1 Status: Success (0x00) Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Sniff mode Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Paging parameter negotiation Power control Transparent synchronous data Flow control lag (most significant bit) Broadcast Encryption Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) EV4 packets EV5 packets AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Enhanced Data Rate eSCO 2 Mbps mode Enhanced Data Rate eSCO 3 Mbps mode 3-slot Enhanced Data Rate eSCO packets Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Erroneous Data Reporting Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control Extended features < HCI Command: Read Local Version I.. (0x04|0x0001) plen 0 #15 [hci2] 8.633157 > HCI Event: Command Complete (0x0e) plen 12 #16 [hci2] 8.633475 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 5.0 (0x09) - Revision 290 (0x0122) LMP version: Bluetooth 5.0 (0x09) - Subversion 24857 (0x6119) Manufacturer: Cypress Semiconductor Corporation (305) < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #17 [hci2] 8.633521 > HCI Event: Command Complete (0x0e) plen 10 #18 [hci2] 8.633829 Read BD ADDR (0x04|0x0009) ncmd 1 Status: Success (0x00) Address: DC:A6:32:0D:EA:B9 (OUI DC-A6-32) < HCI Command: Read Buffer Size (0x04|0x0005) plen 0 #19 [hci2] 8.633919 > HCI Event: Command Complete (0x0e) plen 11 #20 [hci2] 8.634277 Read Buffer Size (0x04|0x0005) ncmd 1 Status: Success (0x00) ACL MTU: 1021 ACL max packet: 8 SCO MTU: 64 SCO max packet: 1 < HCI Command: Read Class of Device (0x03|0x0023) plen 0 #21 [hci2] 8.634314 > HCI Event: Command Complete (0x0e) plen 7 #22 [hci2] 8.634605 Read Class of Device (0x03|0x0023) ncmd 1 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 < HCI Command: Read Local Name (0x03|0x0014) plen 0 #23 [hci2] 8.634646 > HCI Event: Command Complete (0x0e) plen 252 #24 [hci2] 8.635926 Read Local Name (0x03|0x0014) ncmd 1 Status: Success (0x00) Name: raspberrypi #3 < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 #25 [hci2] 8.636023 > HCI Event: Command Complete (0x0e) plen 6 #26 [hci2] 8.636320 Read Voice Setting (0x03|0x0025) ncmd 1 Status: Success (0x00) Setting: 0x0060 Input Coding: Linear Input Data Format: 2's complement Input Sample Size: 16-bit # of bits padding at MSB: 0 Air Coding Format: CVSD < HCI Command: Read Number of Suppo.. (0x03|0x0038) plen 0 #27 [hci2] 8.636358 > HCI Event: Command Complete (0x0e) plen 5 #28 [hci2] 8.636688 Read Number of Supported IAC (0x03|0x0038) ncmd 1 Status: Success (0x00) Number of IAC: 4 < HCI Command: Read Current IAC LAP (0x03|0x0039) plen 0 #29 [hci2] 8.636718 > HCI Event: Command Complete (0x0e) plen 8 #30 [hci2] 8.637012 Read Current IAC LAP (0x03|0x0039) ncmd 1 Status: Success (0x00) Number of IAC: 1 Access code: 0x9e8b33 (General Inquiry) < HCI Command: Set Event Filter (0x03|0x0005) plen 1 #31 [hci2] 8.637042 Type: Clear All Filters (0x00) > HCI Event: Command Complete (0x0e) plen 4 #32 [hci2] 8.637356 Set Event Filter (0x03|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: Write Connection Acc.. (0x03|0x0016) plen 2 #33 [hci2] 8.637396 Timeout: 20000.000 msec (0x7d00) > HCI Event: Command Complete (0x0e) plen 4 #34 [hci2] 8.637675 Write Connection Accept Timeout (0x03|0x0016) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #35 [hci2] 8.637706 > HCI Event: Command Complete (0x0e) plen 7 #36 [hci2] 8.638039 LE Read Buffer Size (0x08|0x0002) ncmd 1 Status: Success (0x00) Data packet length: 251 Num data packets: 7 < HCI Command: LE Read Local Suppor.. (0x08|0x0003) plen 0 #37 [hci2] 8.638068 > HCI Event: Command Complete (0x0e) plen 12 #38 [hci2] 8.638373 LE Read Local Supported Features (0x08|0x0003) ncmd 1 Status: Success (0x00) Features: 0x3f 0x00 0x00 0x08 0x00 0x00 0x00 0x00 LE Encryption Connection Parameter Request Procedure Extended Reject Indication Slave-initiated Features Exchange LE Ping LE Data Packet Length Extension Unknown features (0x0000000008000000) < HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0 #39 [hci2] 8.638404 > HCI Event: Command Complete (0x0e) plen 12 #40 [hci2] 8.638721 LE Read Supported States (0x08|0x001c) ncmd 1 Status: Success (0x00) States: 0x000003ffffffffff Non-connectable Advertising State Scannable Advertising State Connectable Advertising State High Duty Cycle Directed Advertising State Passive Scanning State Active Scanning State Initiating State and Connection State (Master Role) Connection State (Slave Role) Non-connectable Advertising State and Passive Scanning State Scannable Advertising State and Passive Scanning State Connectable Advertising State and Passive Scanning State High Duty Cycle Directed Advertising State and Passive Scanning State Non-connectable Advertising State and Active Scanning State Scannable Advertising State and Active Scanning State Connectable Advertising State and Active Scanning State High Duty Cycle Directed Advertising State and Active Scanning State Non-connectable Advertising State and Initiating State Scannable Advertising State and Initiating State Non-connectable Advertising State and Connection State (Master Role) Scannable Advertising State and Connection State (Master Role) Non-connectable Advertising State and Connection State (Slave Role) Scannable Advertising State and Connection State (Slave Role) Passive Scanning State and Initiating State Active Scanning State and Initiating State Passive Scanning State and Connection State (Master Role) Active Scanning State and Connection State (Master Role) Passive Scanning State and Connection State (Slave Role) Active Scanning State and Connection State (Slave Role) Initiating State and Connection State (Master Role) and Master Role & Master Role Low Duty Cycle Directed Advertising State Low Duty Cycle Directed Advertising State and Passive Scanning State Low Duty Cycle Directed Advertising State and Active Scanning State Connectable Advertising State and Initiating State and Master Role & Slave Role High Duty Cycle Directed Advertising State and Initiating State and Master Role & Slave Role Low Duty Cycle Directed Advertising State and Initiating State and Master Role & Slave Role Connectable Advertising State and Connection State (Master Role) and Master Role & Slave Role High Duty Cycle Directed Advertising State and Connection State (Master Role) and Master Role & Slave Role Low Duty Cycle Directed Advertising State and Connection State (Master Role) and Master Role & Slave Role Connectable Advertising State and Connection State (Slave Role) and Master Role & Slave Role High Duty Cycle Directed Advertising State and Connection State (Slave Role) and Slave Role & Slave Role Low Duty Cycle Directed Advertising State and Connection State (Slave Role) and Slave Role & Slave Role Initiating State and Connection State (Slave Role) and Master Role & Slave Role < HCI Command: Read Local Supported.. (0x04|0x0002) plen 0 #41 [hci2] 8.638753 > HCI Event: Command Complete (0x0e) plen 68 #42 [hci2] 8.639322 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 204 entries Inquiry (Octet 0 - Bit 0) Inquiry Cancel (Octet 0 - Bit 1) Periodic Inquiry Mode (Octet 0 - Bit 2) Exit Periodic Inquiry Mode (Octet 0 - Bit 3) Create Connection (Octet 0 - Bit 4) Disconnect (Octet 0 - Bit 5) Add SCO Connection (Octet 0 - Bit 6) Create Connection Cancel (Octet 0 - Bit 7) Accept Connection Request (Octet 1 - Bit 0) Reject Connection Request (Octet 1 - Bit 1) Link Key Request Reply (Octet 1 - Bit 2) Link Key Request Negative Reply (Octet 1 - Bit 3) PIN Code Request Reply (Octet 1 - Bit 4) PIN Code Request Negative Reply (Octet 1 - Bit 5) Change Connection Packet Type (Octet 1 - Bit 6) Authentication Requested (Octet 1 - Bit 7) Set Connection Encryption (Octet 2 - Bit 0) Change Connection Link Key (Octet 2 - Bit 1) Master Link Key (Octet 2 - Bit 2) Remote Name Request (Octet 2 - Bit 3) Remote Name Request Cancel (Octet 2 - Bit 4) Read Remote Supported Features (Octet 2 - Bit 5) Read Remote Extended Features (Octet 2 - Bit 6) Read Remote Version Information (Octet 2 - Bit 7) Read Clock Offset (Octet 3 - Bit 0) Read LMP Handle (Octet 3 - Bit 1) Sniff Mode (Octet 4 - Bit 2) Exit Sniff Mode (Octet 4 - Bit 3) QoS Setup (Octet 4 - Bit 6) Role Discovery (Octet 4 - Bit 7) Switch Role (Octet 5 - Bit 0) Read Link Policy Settings (Octet 5 - Bit 1) Write Link Policy Settings (Octet 5 - Bit 2) Read Default Link Policy Settings (Octet 5 - Bit 3) Write Default Link Policy Settings (Octet 5 - Bit 4) Flow Specification (Octet 5 - Bit 5) Set Event Mask (Octet 5 - Bit 6) Reset (Octet 5 - Bit 7) Set Event Filter (Octet 6 - Bit 0) Flush (Octet 6 - Bit 1) Read PIN Type (Octet 6 - Bit 2) Write PIN Type (Octet 6 - Bit 3) Read Stored Link Key (Octet 6 - Bit 5) Write Stored Link Key (Octet 6 - Bit 6) Delete Stored Link Key (Octet 6 - Bit 7) Write Local Name (Octet 7 - Bit 0) Read Local Name (Octet 7 - Bit 1) Read Connection Accept Timeout (Octet 7 - Bit 2) Write Connection Accept Timeout (Octet 7 - Bit 3) Read Page Timeout (Octet 7 - Bit 4) Write Page Timeout (Octet 7 - Bit 5) Read Scan Enable (Octet 7 - Bit 6) Write Scan Enable (Octet 7 - Bit 7) Read Page Scan Activity (Octet 8 - Bit 0) Write Page Scan Activity (Octet 8 - Bit 1) Read Inquiry Scan Activity (Octet 8 - Bit 2) Write Inquiry Scan Activity (Octet 8 - Bit 3) Read Authentication Enable (Octet 8 - Bit 4) Write Authentication Enable (Octet 8 - Bit 5) Read Encryption Mode (Octet 8 - Bit 6) Write Encryption Mode (Octet 8 - Bit 7) Read Class of Device (Octet 9 - Bit 0) Write Class of Device (Octet 9 - Bit 1) Read Voice Setting (Octet 9 - Bit 2) Write Voice Setting (Octet 9 - Bit 3) Read Automatic Flush Timeout (Octet 9 - Bit 4) Write Automatic Flush Timeout (Octet 9 - Bit 5) Read Num Broadcast Retransmissions (Octet 9 - Bit 6) Write Num Broadcast Retransmissions (Octet 9 - Bit 7) Read Transmit Power Level (Octet 10 - Bit 2) Read Sync Flow Control Enable (Octet 10 - Bit 3) Set Controller To Host Flow Control (Octet 10 - Bit 5) Host Buffer Size (Octet 10 - Bit 6) Host Number of Completed Packets (Octet 10 - Bit 7) Read Link Supervision Timeout (Octet 11 - Bit 0) Write Link Supervision Timeout (Octet 11 - Bit 1) Read Number of Supported IAC (Octet 11 - Bit 2) Read Current IAC LAP (Octet 11 - Bit 3) Write Current IAC LAP (Octet 11 - Bit 4) Set AFH Host Channel Classification (Octet 12 - Bit 1) Read Inquiry Scan Type (Octet 12 - Bit 4) Write Inquiry Scan Type (Octet 12 - Bit 5) Read Inquiry Mode (Octet 12 - Bit 6) Write Inquiry Mode (Octet 12 - Bit 7) Read Page Scan Type (Octet 13 - Bit 0) Write Page Scan Type (Octet 13 - Bit 1) Read AFH Channel Assessment Mode (Octet 13 - Bit 2) Write AFH Channel Assessment Mode (Octet 13 - Bit 3) Read Local Version Information (Octet 14 - Bit 3) Read Local Supported Features (Octet 14 - Bit 5) Read Local Extended Features (Octet 14 - Bit 6) Read Buffer Size (Octet 14 - Bit 7) Read BD ADDR (Octet 15 - Bit 1) Read Failed Contact Counter (Octet 15 - Bit 2) Reset Failed Contact Counter (Octet 15 - Bit 3) Read Link Quality (Octet 15 - Bit 4) Read RSSI (Octet 15 - Bit 5) Read AFH Channel Map (Octet 15 - Bit 6) Read Clock (Octet 15 - Bit 7) Read Loopback Mode (Octet 16 - Bit 0) Write Loopback Mode (Octet 16 - Bit 1) Enable Device Under Test Mode (Octet 16 - Bit 2) Setup Synchronous Connection (Octet 16 - Bit 3) Accept Synchronous Connection Request (Octet 16 - Bit 4) Reject Synchronous Connection Request (Octet 16 - Bit 5) Read Extended Inquiry Response (Octet 17 - Bit 0) Write Extended Inquiry Response (Octet 17 - Bit 1) Refresh Encryption Key (Octet 17 - Bit 2) Sniff Subrating (Octet 17 - Bit 4) Read Simple Pairing Mode (Octet 17 - Bit 5) Write Simple Pairing Mode (Octet 17 - Bit 6) Read Local OOB Data (Octet 17 - Bit 7) Read Inquiry Response TX Power Level (Octet 18 - Bit 0) Write Inquiry Transmit Power Level (Octet 18 - Bit 1) Read Default Erroneous Data Reporting (Octet 18 - Bit 2) Write Default Erroneous Data Reporting (Octet 18 - Bit 3) IO Capability Request Reply (Octet 18 - Bit 7) User Confirmation Request Reply (Octet 19 - Bit 0) User Confirmation Request Neg Reply (Octet 19 - Bit 1) User Passkey Request Reply (Octet 19 - Bit 2) User Passkey Request Negative Reply (Octet 19 - Bit 3) Remote OOB Data Request Reply (Octet 19 - Bit 4) Write Simple Pairing Debug Mode (Octet 19 - Bit 5) Enhanced Flush (Octet 19 - Bit 6) Remote OOB Data Request Neg Reply (Octet 19 - Bit 7) Send Keypress Notification (Octet 20 - Bit 2) IO Capability Request Negative Reply (Octet 20 - Bit 3) Read Encryption Key Size (Octet 20 - Bit 4) Set Event Mask Page 2 (Octet 22 - Bit 2) Read Enhanced Transmit Power Level (Octet 24 - Bit 0) Read LE Host Supported (Octet 24 - Bit 5) Write LE Host Supported (Octet 24 - Bit 6) LE Set Event Mask (Octet 25 - Bit 0) LE Read Buffer Size (Octet 25 - Bit 1) LE Read Local Supported Features (Octet 25 - Bit 2) LE Set Random Address (Octet 25 - Bit 4) LE Set Advertising Parameters (Octet 25 - Bit 5) LE Read Advertising Channel TX Power (Octet 25 - Bit 6) LE Set Advertising Data (Octet 25 - Bit 7) LE Set Scan Response Data (Octet 26 - Bit 0) LE Set Advertise Enable (Octet 26 - Bit 1) LE Set Scan Parameters (Octet 26 - Bit 2) LE Set Scan Enable (Octet 26 - Bit 3) LE Create Connection (Octet 26 - Bit 4) LE Create Connection Cancel (Octet 26 - Bit 5) LE Read White List Size (Octet 26 - Bit 6) LE Clear White List (Octet 26 - Bit 7) LE Add Device To White List (Octet 27 - Bit 0) LE Remove Device From White List (Octet 27 - Bit 1) LE Connection Update (Octet 27 - Bit 2) LE Set Host Channel Classification (Octet 27 - Bit 3) LE Read Channel Map (Octet 27 - Bit 4) LE Read Remote Used Features (Octet 27 - Bit 5) LE Encrypt (Octet 27 - Bit 6) LE Rand (Octet 27 - Bit 7) LE Start Encryption (Octet 28 - Bit 0) LE Long Term Key Request Reply (Octet 28 - Bit 1) LE Long Term Key Request Neg Reply (Octet 28 - Bit 2) LE Read Supported States (Octet 28 - Bit 3) LE Receiver Test (Octet 28 - Bit 4) LE Transmitter Test (Octet 28 - Bit 5) LE Test End (Octet 28 - Bit 6) Enhanced Setup Synchronous Connection (Octet 29 - Bit 3) Enhanced Accept Synchronous Connection Request (Octet 29 - Bit 4) Read Local Supported Codecs (Octet 29 - Bit 5) Set MWS Channel Parameters (Octet 29 - Bit 6) Set External Frame Configuration (Octet 29 - Bit 7) Set MWS Signaling (Octet 30 - Bit 0) Set MWS Transport Layer (Octet 30 - Bit 1) Set MWS Scan Frequency Table (Octet 30 - Bit 2) Get MWS Transport Layer Configuration (Octet 30 - Bit 3) Set MWS Pattern Configuration (Octet 30 - Bit 4) Set Triggered Clock Capture (Octet 30 - Bit 5) Truncated Page (Octet 30 - Bit 6) Truncated Page Cancel (Octet 30 - Bit 7) Set Connectionless Slave Broadcast (Octet 31 - Bit 0) Set Connectionless Slave Broadcast Receive (Octet 31 - Bit 1) Start Synchronization Train (Octet 31 - Bit 2) Receive Synchronization Train (Octet 31 - Bit 3) Set Reserved LT_ADDR (Octet 31 - Bit 4) Delete Reserved LT_ADDR (Octet 31 - Bit 5) Set Connectionless Slave Broadcast Data (Octet 31 - Bit 6) Read Synchronization Train Parameters (Octet 31 - Bit 7) Write Synchronization Train Parameters (Octet 32 - Bit 0) Remote OOB Extended Data Request Reply (Octet 32 - Bit 1) Read Secure Connections Host Support (Octet 32 - Bit 2) Write Secure Connections Host Support (Octet 32 - Bit 3) Read Authenticated Payload Timeout (Octet 32 - Bit 4) Write Authenticated Payload Timeout (Octet 32 - Bit 5) Read Local OOB Extended Data (Octet 32 - Bit 6) Write Secure Connections Test Mode (Octet 32 - Bit 7) Read Extended Page Timeout (Octet 33 - Bit 0) Write Extended Page Timeout (Octet 33 - Bit 1) Read Extended Inquiry Length (Octet 33 - Bit 2) Write Extended Inquiry Length (Octet 33 - Bit 3) LE Remote Connection Parameter Request Reply (Octet 33 - Bit 4) LE Remote Connection Parameter Request Negative Reply (Octet 33 - Bit 5) LE Set Data Length (Octet 33 - Bit 6) LE Read Suggested Default Data Length (Octet 33 - Bit 7) LE Write Suggested Default Data Length (Octet 34 - Bit 0) LE Read Local P-256 Public Key (Octet 34 - Bit 1) LE Generate DHKey (Octet 34 - Bit 2) LE Read Maximum Data Length (Octet 35 - Bit 3) Octet 41 - Bit 3 < HCI Command: Write Simple Pairing.. (0x03|0x0056) plen 1 #43 [hci2] 8.639358 Mode: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #44 [hci2] 8.740842 Write Simple Pairing Mode (0x03|0x0056) ncmd 1 Status: Success (0x00) < HCI Command: Write Inquiry Mode (0x03|0x0045) plen 1 #45 [hci2] 8.740911 Mode: Inquiry Result with RSSI or Extended Inquiry Result (0x02) > HCI Event: Command Complete (0x0e) plen 4 #46 [hci2] 8.741264 Write Inquiry Mode (0x03|0x0045) ncmd 1 Status: Success (0x00) < HCI Command: Read Inquiry Respons.. (0x03|0x0058) plen 0 #47 [hci2] 8.741298 > HCI Event: Command Complete (0x0e) plen 5 #48 [hci2] 8.741580 Read Inquiry Response TX Power Level (0x03|0x0058) ncmd 1 Status: Success (0x00) TX power: 0 dbm (0x00) < HCI Command: Read Local Extended... (0x04|0x0004) plen 1 #49 [hci2] 8.741613 Page: 1 > HCI Event: Command Complete (0x0e) plen 14 #50 [hci2] 8.741924 Read Local Extended Features (0x04|0x0004) ncmd 1 Status: Success (0x00) Page: 1/2 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) < HCI Command: Set Event Mask (0x03|0x0001) plen 8 #51 [hci2] 8.741995 Mask: 0x3dbff807fffbffff Inquiry Complete Inquiry Result Connection Complete Connection Request Disconnection Complete Authentication Complete Remote Name Request Complete Encryption Change Change Connection Link Key Complete Master Link Key Complete Read Remote Supported Features Complete Read Remote Version Information Complete QoS Setup Complete Command Complete Command Status Hardware Error Flush Occurred Role Change Mode Change Return Link Keys PIN Code Request Link Key Request Link Key Notification Loopback Command Data Buffer Overflow Max Slots Change Read Clock Offset Complete Connection Packet Type Changed QoS Violation Page Scan Mode Change Page Scan Repetition Mode Change Flow Specification Complete Inquiry Result with RSSI Read Remote Extended Features Complete Synchronous Connection Complete Synchronous Connection Changed Sniff Subrating Extended Inquiry Result Encryption Key Refresh Complete IO Capability Request IO Capability Request Reply User Confirmation Request User Passkey Request Remote OOB Data Request Simple Pairing Complete Link Supervision Timeout Changed Enhanced Flush Complete User Passkey Notification Keypress Notification Remote Host Supported Features Notification LE Meta > HCI Event: Command Complete (0x0e) plen 4 #52 [hci2] 8.742590 Set Event Mask (0x03|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 #53 [hci2] 8.742628 Address: 00:00:00:00:00:00 (OUI 00-00-00) Read all: 0x01 > HCI Event: Command Complete (0x0e) plen 8 #54 [hci2] 8.743005 Read Stored Link Key (0x03|0x000d) ncmd 1 Status: Success (0x00) Max num keys: 1 Num keys: 0 < HCI Command: Write Default Link P.. (0x02|0x000f) plen 2 #55 [hci2] 8.743040 Link policy: 0x0005 Enable Role Switch Enable Sniff Mode > HCI Event: Command Complete (0x0e) plen 4 #56 [hci2] 8.743324 Write Default Link Policy Settings (0x02|0x000f) ncmd 1 Status: Success (0x00) < HCI Command: Read Page Scan Activ.. (0x03|0x001b) plen 0 #57 [hci2] 8.743355 > HCI Event: Command Complete (0x0e) plen 8 #58 [hci2] 8.743672 Read Page Scan Activity (0x03|0x001b) ncmd 1 Status: Success (0x00) Interval: 1280.000 msec (0x0800) Window: 11.250 msec (0x0012) < HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 #59 [hci2] 8.743703 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci2] 8.743978 Read Page Scan Type (0x03|0x0046) ncmd 1 Status: Success (0x00) Type: Standard Scan (0x00) < HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #61 [hci2] 8.744009 Mask: 0x00000000000001ff LE Connection Complete LE Advertising Report LE Connection Update Complete LE Read Remote Used Features Complete LE Long Term Key Request LE Remote Connection Parameter Request LE Data Length Change LE Read Local P-256 Public Key Complete LE Generate DHKey Complete > HCI Event: Command Complete (0x0e) plen 4 #62 [hci2] 8.744342 LE Set Event Mask (0x08|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Advertising... (0x08|0x0007) plen 0 #63 [hci2] 8.744384 > HCI Event: Command Complete (0x0e) plen 5 #64 [hci2] 8.744671 LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1 Status: Success (0x00) TX power: 12 dbm (0x0c) < HCI Command: LE Read White List S.. (0x08|0x000f) plen 0 #65 [hci2] 8.744708 > HCI Event: Command Complete (0x0e) plen 5 #66 [hci2] 8.744979 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 128 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #67 [hci2] 8.745006 > HCI Event: Command Complete (0x0e) plen 4 #68 [hci2] 8.745307 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Data.. (0x08|0x002f) plen 0 #69 [hci2] 8.745339 > HCI Event: Command Complete (0x0e) plen 12 #70 [hci2] 8.745645 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 2120 Max RX octets: 251 Max RX time: 2120 < HCI Command: LE Read Suggested De.. (0x08|0x0023) plen 0 #71 [hci2] 8.745704 > HCI Event: Command Complete (0x0e) plen 8 #72 [hci2] 8.746025 LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1 Status: Success (0x00) TX octets: 27 TX time: 328 < HCI Command: Write LE Host Suppor.. (0x03|0x006d) plen 2 #73 [hci2] 8.746069 Supported: 0x01 Simultaneous: 0x00 > HCI Event: Command Complete (0x0e) plen 4 #74 [hci2] 8.746378 Write LE Host Supported (0x03|0x006d) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Extended... (0x04|0x0004) plen 1 #75 [hci2] 8.746406 Page: 2 > HCI Event: Command Complete (0x0e) plen 14 #76 [hci2] 8.746774 Read Local Extended Features (0x04|0x0004) ncmd 1 Status: Success (0x00) Page: 2/2 Features: 0x7f 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 Connectionless Slave Broadcast - Master Connectionless Slave Broadcast - Slave Synchronization Train Synchronization Scan Inquiry Response Notification Event Generalized interlaced scan Coarse Clock Adjustment Secure Connections (Controller Support) Ping Train nudging < HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7 #77 [hci2] 8.746825 Address: 00:00:00:00:00:00 (OUI 00-00-00) Delete all: 0x01 > HCI Event: Command Complete (0x0e) plen 6 #78 [hci2] 8.747110 Delete Stored Link Key (0x03|0x0012) ncmd 1 Status: Success (0x00) Num keys: 0 < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 #79 [hci2] 8.747129 Mask: 0x0000000000bfc000 Triggered Clock Capture Synchronization Train Complete Synchronization Train Received Connectionless Slave Broadcast Receive Connectionless Slave Broadcast Timeout Truncated Page Complete Slave Page Response Timeout Connectionless Slave Broadcast Channel Map Change Authenticated Payload Timeout Expired > HCI Event: Command Complete (0x0e) plen 4 #80 [hci2] 8.747425 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported.. (0x04|0x000b) plen 0 #81 [hci2] 8.747442 > HCI Event: Command Complete (0x0e) plen 12 #82 [hci2] 8.747743 Read Local Supported Codecs (0x04|0x000b) ncmd 1 Status: Success (0x00) Number of supported codecs: 6 Codec: u-law log (0x00) Codec: A-law log (0x01) Codec: CVSD (0x02) Codec: Transparent (0x03) Codec: Linear PCM (0x04) Codec: mSBC (0x05) Number of vendor codecs: 0 < HCI Command: Get MWS Transport La.. (0x05|0x000c) plen 0 #83 [hci2] 8.747760 > HCI Event: Command Complete (0x0e) plen 15 #84 [hci2] 8.748108 Get MWS Transport Layer Configuration (0x05|0x000c) ncmd 1 Status: Success (0x00) Number of transports: 1 Transport layer: WCI-2 (0x02) Number of baud rates: 1 Baud rate list: 1 entry Bluetooth to MWS: 3000000 MWS to Bluetooth: 3000000 < HCI Command: Read Synchronization.. (0x03|0x0077) plen 0 #85 [hci2] 8.748125 > HCI Event: Command Complete (0x0e) plen 11 #86 [hci2] 8.748413 Read Synchronization Train Parameters (0x03|0x0077) ncmd 1 Status: Success (0x00) Interval: 80.000 msec (0x0080) Timeout: 40958.750 msec (0x0000fffe) Service data: 0x00 < HCI Command: Write Secure Connect.. (0x03|0x007a) plen 1 #87 [hci2] 8.748431 Support: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #88 [hci2] 8.748702 Write Secure Connections Host Support (0x03|0x007a) ncmd 1 Status: Success (0x00) < HCI Command: LE Write Suggested D.. (0x08|0x0024) plen 4 #89 [hci2] 8.748719 TX octets: 251 TX time: 2120 > HCI Event: Command Complete (0x0e) plen 4 #90 [hci2] 8.748990 LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1 Status: Success (0x00) = Index Info: DC:A6:32:0.. (Cypress Semiconductor Corporation) [hci2] 8.749014 < HCI Command: LE Set Advertising... (0x08|0x0008) plen 32 #91 [hci2] 8.749072 Length: 3 TX power: 12 dBm > HCI Event: Command Complete (0x0e) plen 4 #92 [hci2] 8.749444 LE Set Advertising Data (0x08|0x0008) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Respons.. (0x08|0x0009) plen 32 #93 [hci2] 8.749467 Length: 13 Name (short): raspberryp > HCI Event: Command Complete (0x0e) plen 4 #94 [hci2] 8.749869 LE Set Scan Response Data (0x08|0x0009) ncmd 1 Status: Success (0x00) < HCI Command: Write Local Name (0x03|0x0013) plen 248 #95 [hci2] 8.749898 Name: raspberrypi #3 > HCI Event: Command Complete (0x0e) plen 4 #96 [hci2] 8.751059 Write Local Name (0x03|0x0013) ncmd 1 Status: Success (0x00) < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #97 [hci2] 8.751086 FEC: Not required (0x00) Name (complete): raspberrypi #3 TX power: 0 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) > HCI Event: Command Complete (0x0e) plen 4 #98 [hci2] 8.752267 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci2] 8.752298 Set Powered (0x0005) plen 4 Status: Success (0x00) Current settings: 0x00000ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci2] 8.752307 Current settings: 0x00000ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci2] 8.752462 UUID: 0000110e-0000-1000-8000-00805f9b34fb Service class: 0x00 < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #99 [hci2] 8.752485 FEC: Not required (0x00) Name (complete): raspberrypi #3 TX power: 0 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 1 entry A/V Remote Control (0x110e) > HCI Event: Command Complete (0x0e) plen 4 #100 [hci2] 8.753643 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci2] 8.753667 Add UUID (0x0010) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci2] 8.753829 UUID: 0000110c-0000-1000-8000-00805f9b34fb Service class: 0x00 < HCI Command: Write Extended In.. (0x03|0x0052) plen 241 #101 [hci2] 8.753852 FEC: Not required (0x00) Name (complete): raspberrypi #3 TX power: 0 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 2 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 #102 [hci2] 8.754989 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci2] 8.755012 Add UUID (0x0010) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Unblock Device (0x0027) plen 7 {0x0001} [hci2] 8.755129 BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Event: Device Unblocked (0x0015) plen 7 {0x0002} [hci2] 8.755136 BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci2] 8.755143 Unblock Device (0x0027) plen 7 Status: Success (0x00) BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Command: Load Link Keys (0x0012) plen 3 {0x0001} [hci2] 8.755195 Debug keys: Disabled (0x00) Keys: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci2] 8.755201 Load Link Keys (0x0012) plen 0 Status: Success (0x00) @ MGMT Command: Load Long Term Keys (0x0013) plen 2 {0x0001} [hci2] 8.755269 Keys: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci2] 8.755280 Load Long Term Keys (0x0013) plen 0 Status: Success (0x00) @ MGMT Command: Load Identity Resol.. (0x0030) plen 2 {0x0001} [hci2] 8.755340 Keys: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci2] 8.755344 Load Identity Resolving Keys (0x0030) plen 0 Status: Success (0x00) @ MGMT Command: Load Connection Par.. (0x0035) plen 2 {0x0001} [hci2] 8.755393 Parameters: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci2] 8.755398 Load Connection Parameters (0x0035) plen 0 Status: Success (0x00) @ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci2] 8.755444 UUID: 00001200-0000-1000-8000-00805f9b34fb Service class: 0x00 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci2] 8.755453 Add UUID (0x0010) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Set Device ID (0x0028) plen 8 {0x0001} [hci2] 8.755504 Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci2] 8.755509 Set Device ID (0x0028) plen 0 Status: Success (0x00) @ MGMT Command: Set Device Class (0x000e) plen 2 {0x0001} [hci2] 8.755557 Major class: 0x00 Minor class: 0x00 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci2] 8.755562 Set Device Class (0x000e) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci2] 8.755609 Name: BlueZ 5.50 Short name: < HCI Command: Write Local Name (0x03|0x0013) plen 248 #103 [hci2] 8.755630 Name: BlueZ 5.50 > HCI Event: Command Complete (0x0e) plen 4 #104 [hci2] 8.756826 Write Local Name (0x03|0x0013) ncmd 1 Status: Success (0x00) @ MGMT Event: Local Name Changed (0x0008) plen 260 {0x0002} [hci2] 8.756846 Name: BlueZ 5.50 Short name: < HCI Command: Write Extended In.. (0x03|0x0052) plen 241 #105 [hci2] 8.756865 FEC: Not required (0x00) Name (complete): BlueZ 5.50 TX power: 0 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 2 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 #106 [hci2] 8.758035 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 263 {0x0001} [hci2] 8.758051 Set Local Name (0x000f) plen 260 Status: Success (0x00) Name: BlueZ 5.50 Short name: @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci1] 8.758167 UUID: 00000000-0000-0000-0000-000000000000 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci1] 8.758178 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Remove Device (0x0034) plen 7 {0x0001} [hci1] 8.758229 BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci1] 8.758239 Remove Device (0x0034) plen 7 Status: Success (0x00) BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Command: Set Privacy (0x002f) plen 17 {0x0001} [hci1] 8.758287 Privacy: Disabled (0x00) Key: 00000000000000000000000000000000 @ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci1] 8.758293 Set Privacy (0x002f) plen 4 Status: Success (0x00) Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Command: Read Advertising Fe.. (0x003d) plen 0 {0x0001} [hci1] 8.758340 @ MGMT Event: Command Complete (0x0001) plen 11 {0x0001} [hci1] 8.758345 Read Advertising Features (0x003d) plen 8 Status: Success (0x00) Flags: 0x0000007f Switch into Connectable mode Advertise as Discoverable Advertise as Limited Discoverable Add Flags field to Advertising Data Add TX Power field to Advertising Data Add Appearance field to Scan Response Add Local Name in Scan Response Advertising data length: 31 Scan response length: 31 Max instances: 5 Instances: 0 @ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci1] 8.758391 Powered: Enabled (0x01) = Open Index: 00:15:83:EF:21:57 #10 [hci1] 8.758437 < HCI Command: Reset (0x03|0x0003) plen 0 #11 [hci1] 8.758457 > HCI Event: Command Complete (0x0e) plen 4 #12 [hci1] 8.884885 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported.. (0x04|0x0003) plen 0 #13 [hci1] 8.884949 > HCI Event: Command Complete (0x0e) plen 12 #14 [hci1] 8.887868 Read Local Supported Features (0x04|0x0003) ncmd 1 Status: Success (0x00) Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x87 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Hold mode Sniff mode Park state Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Paging parameter negotiation Power control Transparent synchronous data Broadcast Encryption Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) EV4 packets EV5 packets AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Enhanced Data Rate eSCO 2 Mbps mode Enhanced Data Rate eSCO 3 Mbps mode 3-slot Enhanced Data Rate eSCO packets Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control Extended features < HCI Command: Read Local Version I.. (0x04|0x0001) plen 0 #15 [hci1] 8.887917 > HCI Event: Command Complete (0x0e) plen 12 #16 [hci1] 8.890875 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 4.0 (0x06) - Revision 8891 (0x22bb) LMP version: Bluetooth 4.0 (0x06) - Subversion 8891 (0x22bb) Manufacturer: Cambridge Silicon Radio (10) < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #17 [hci1] 8.890939 > HCI Event: Command Complete (0x0e) plen 10 #18 [hci1] 8.893872 Read BD ADDR (0x04|0x0009) ncmd 1 Status: Success (0x00) Address: 00:15:83:EF:21:57 (IVT corporation) < HCI Command: Read Buffer Size (0x04|0x0005) plen 0 #19 [hci1] 8.893972 > HCI Event: Command Complete (0x0e) plen 11 #20 [hci1] 8.896873 Read Buffer Size (0x04|0x0005) ncmd 1 Status: Success (0x00) ACL MTU: 310 ACL max packet: 10 SCO MTU: 64 SCO max packet: 8 < HCI Command: Read Class of Device (0x03|0x0023) plen 0 #21 [hci1] 8.896930 > HCI Event: Command Complete (0x0e) plen 7 #22 [hci1] 8.899876 Read Class of Device (0x03|0x0023) ncmd 1 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 < HCI Command: Read Local Name (0x03|0x0014) plen 0 #23 [hci1] 8.899925 > HCI Event: Command Complete (0x0e) plen 252 #24 [hci1] 8.919887 Read Local Name (0x03|0x0014) ncmd 1 Status: Success (0x00) Name: CSR8510 A10 < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 #25 [hci1] 8.919957 > HCI Event: Command Complete (0x0e) plen 6 #26 [hci1] 8.922881 Read Voice Setting (0x03|0x0025) ncmd 1 Status: Success (0x00) Setting: 0x0060 Input Coding: Linear Input Data Format: 2's complement Input Sample Size: 16-bit # of bits padding at MSB: 0 Air Coding Format: CVSD < HCI Command: Read Number of Suppo.. (0x03|0x0038) plen 0 #27 [hci1] 8.922949 > HCI Event: Command Complete (0x0e) plen 5 #28 [hci1] 8.925878 Read Number of Supported IAC (0x03|0x0038) ncmd 1 Status: Success (0x00) Number of IAC: 2 < HCI Command: Read Current IAC LAP (0x03|0x0039) plen 0 #29 [hci1] 8.925947 > HCI Event: Command Complete (0x0e) plen 8 #30 [hci1] 8.928876 Read Current IAC LAP (0x03|0x0039) ncmd 1 Status: Success (0x00) Number of IAC: 1 Access code: 0x9e8b33 (General Inquiry) < HCI Command: Set Event Filter (0x03|0x0005) plen 1 #31 [hci1] 8.928927 Type: Clear All Filters (0x00) > HCI Event: Command Complete (0x0e) plen 4 #32 [hci1] 8.931883 Set Event Filter (0x03|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: Write Connection Acc.. (0x03|0x0016) plen 2 #33 [hci1] 8.931952 Timeout: 20000.000 msec (0x7d00) > HCI Event: Command Complete (0x0e) plen 4 #34 [hci1] 8.934881 Write Connection Accept Timeout (0x03|0x0016) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #35 [hci1] 8.934947 > HCI Event: Command Complete (0x0e) plen 7 #36 [hci1] 8.937879 LE Read Buffer Size (0x08|0x0002) ncmd 1 Status: Success (0x00) Data packet length: 0 Num data packets: 0 < HCI Command: LE Read Local Suppor.. (0x08|0x0003) plen 0 #37 [hci1] 8.937930 > HCI Event: Command Complete (0x0e) plen 12 #38 [hci1] 8.940882 LE Read Local Supported Features (0x08|0x0003) ncmd 1 Status: Success (0x00) Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 LE Encryption < HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0 #39 [hci1] 8.940931 > HCI Event: Command Complete (0x0e) plen 12 #40 [hci1] 8.943886 LE Read Supported States (0x08|0x001c) ncmd 1 Status: Success (0x00) States: 0x000000001fffffff Non-connectable Advertising State Scannable Advertising State Connectable Advertising State High Duty Cycle Directed Advertising State Passive Scanning State Active Scanning State Initiating State and Connection State (Master Role) Connection State (Slave Role) Non-connectable Advertising State and Passive Scanning State Scannable Advertising State and Passive Scanning State Connectable Advertising State and Passive Scanning State High Duty Cycle Directed Advertising State and Passive Scanning State Non-connectable Advertising State and Active Scanning State Scannable Advertising State and Active Scanning State Connectable Advertising State and Active Scanning State High Duty Cycle Directed Advertising State and Active Scanning State Non-connectable Advertising State and Initiating State Scannable Advertising State and Initiating State Non-connectable Advertising State and Connection State (Master Role) Scannable Advertising State and Connection State (Master Role) Non-connectable Advertising State and Connection State (Slave Role) Scannable Advertising State and Connection State (Slave Role) Passive Scanning State and Initiating State Active Scanning State and Initiating State Passive Scanning State and Connection State (Master Role) Active Scanning State and Connection State (Master Role) Passive Scanning State and Connection State (Slave Role) Active Scanning State and Connection State (Slave Role) Initiating State and Connection State (Master Role) and Master Role & Master Role < HCI Command: Read Local Supported.. (0x04|0x0002) plen 0 #41 [hci1] 8.943935 > HCI Event: Command Complete (0x0e) plen 68 #42 [hci1] 8.951877 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 170 entries Inquiry (Octet 0 - Bit 0) Inquiry Cancel (Octet 0 - Bit 1) Periodic Inquiry Mode (Octet 0 - Bit 2) Exit Periodic Inquiry Mode (Octet 0 - Bit 3) Create Connection (Octet 0 - Bit 4) Disconnect (Octet 0 - Bit 5) Add SCO Connection (Octet 0 - Bit 6) Create Connection Cancel (Octet 0 - Bit 7) Accept Connection Request (Octet 1 - Bit 0) Reject Connection Request (Octet 1 - Bit 1) Link Key Request Reply (Octet 1 - Bit 2) Link Key Request Negative Reply (Octet 1 - Bit 3) PIN Code Request Reply (Octet 1 - Bit 4) PIN Code Request Negative Reply (Octet 1 - Bit 5) Change Connection Packet Type (Octet 1 - Bit 6) Authentication Requested (Octet 1 - Bit 7) Set Connection Encryption (Octet 2 - Bit 0) Change Connection Link Key (Octet 2 - Bit 1) Master Link Key (Octet 2 - Bit 2) Remote Name Request (Octet 2 - Bit 3) Remote Name Request Cancel (Octet 2 - Bit 4) Read Remote Supported Features (Octet 2 - Bit 5) Read Remote Extended Features (Octet 2 - Bit 6) Read Remote Version Information (Octet 2 - Bit 7) Read Clock Offset (Octet 3 - Bit 0) Read LMP Handle (Octet 3 - Bit 1) Hold Mode (Octet 4 - Bit 1) Sniff Mode (Octet 4 - Bit 2) Exit Sniff Mode (Octet 4 - Bit 3) Park State (Octet 4 - Bit 4) Exit Park State (Octet 4 - Bit 5) QoS Setup (Octet 4 - Bit 6) Role Discovery (Octet 4 - Bit 7) Switch Role (Octet 5 - Bit 0) Read Link Policy Settings (Octet 5 - Bit 1) Write Link Policy Settings (Octet 5 - Bit 2) Read Default Link Policy Settings (Octet 5 - Bit 3) Write Default Link Policy Settings (Octet 5 - Bit 4) Flow Specification (Octet 5 - Bit 5) Set Event Mask (Octet 5 - Bit 6) Reset (Octet 5 - Bit 7) Set Event Filter (Octet 6 - Bit 0) Flush (Octet 6 - Bit 1) Read PIN Type (Octet 6 - Bit 2) Write PIN Type (Octet 6 - Bit 3) Create New Unit Key (Octet 6 - Bit 4) Read Stored Link Key (Octet 6 - Bit 5) Write Stored Link Key (Octet 6 - Bit 6) Delete Stored Link Key (Octet 6 - Bit 7) Write Local Name (Octet 7 - Bit 0) Read Local Name (Octet 7 - Bit 1) Read Connection Accept Timeout (Octet 7 - Bit 2) Write Connection Accept Timeout (Octet 7 - Bit 3) Read Page Timeout (Octet 7 - Bit 4) Write Page Timeout (Octet 7 - Bit 5) Read Scan Enable (Octet 7 - Bit 6) Write Scan Enable (Octet 7 - Bit 7) Read Page Scan Activity (Octet 8 - Bit 0) Write Page Scan Activity (Octet 8 - Bit 1) Read Inquiry Scan Activity (Octet 8 - Bit 2) Write Inquiry Scan Activity (Octet 8 - Bit 3) Read Authentication Enable (Octet 8 - Bit 4) Write Authentication Enable (Octet 8 - Bit 5) Read Encryption Mode (Octet 8 - Bit 6) Write Encryption Mode (Octet 8 - Bit 7) Read Class of Device (Octet 9 - Bit 0) Write Class of Device (Octet 9 - Bit 1) Read Voice Setting (Octet 9 - Bit 2) Write Voice Setting (Octet 9 - Bit 3) Read Automatic Flush Timeout (Octet 9 - Bit 4) Write Automatic Flush Timeout (Octet 9 - Bit 5) Read Num Broadcast Retransmissions (Octet 9 - Bit 6) Write Num Broadcast Retransmissions (Octet 9 - Bit 7) Read Hold Mode Activity (Octet 10 - Bit 0) Write Hold Mode Activity (Octet 10 - Bit 1) Read Transmit Power Level (Octet 10 - Bit 2) Read Sync Flow Control Enable (Octet 10 - Bit 3) Write Sync Flow Control Enable (Octet 10 - Bit 4) Set Controller To Host Flow Control (Octet 10 - Bit 5) Host Buffer Size (Octet 10 - Bit 6) Host Number of Completed Packets (Octet 10 - Bit 7) Read Link Supervision Timeout (Octet 11 - Bit 0) Write Link Supervision Timeout (Octet 11 - Bit 1) Read Number of Supported IAC (Octet 11 - Bit 2) Read Current IAC LAP (Octet 11 - Bit 3) Write Current IAC LAP (Octet 11 - Bit 4) Read Page Scan Period Mode (Octet 11 - Bit 5) Write Page Scan Period Mode (Octet 11 - Bit 6) Read Page Scan Mode (Octet 11 - Bit 7) Write Page Scan Mode (Octet 12 - Bit 0) Set AFH Host Channel Classification (Octet 12 - Bit 1) Read Inquiry Scan Type (Octet 12 - Bit 4) Write Inquiry Scan Type (Octet 12 - Bit 5) Read Inquiry Mode (Octet 12 - Bit 6) Write Inquiry Mode (Octet 12 - Bit 7) Read Page Scan Type (Octet 13 - Bit 0) Write Page Scan Type (Octet 13 - Bit 1) Read AFH Channel Assessment Mode (Octet 13 - Bit 2) Write AFH Channel Assessment Mode (Octet 13 - Bit 3) Read Local Version Information (Octet 14 - Bit 3) Read Local Supported Features (Octet 14 - Bit 5) Read Local Extended Features (Octet 14 - Bit 6) Read Buffer Size (Octet 14 - Bit 7) Read BD ADDR (Octet 15 - Bit 1) Read Failed Contact Counter (Octet 15 - Bit 2) Reset Failed Contact Counter (Octet 15 - Bit 3) Read Link Quality (Octet 15 - Bit 4) Read RSSI (Octet 15 - Bit 5) Read AFH Channel Map (Octet 15 - Bit 6) Read Clock (Octet 15 - Bit 7) Read Loopback Mode (Octet 16 - Bit 0) Write Loopback Mode (Octet 16 - Bit 1) Enable Device Under Test Mode (Octet 16 - Bit 2) Setup Synchronous Connection (Octet 16 - Bit 3) Accept Synchronous Connection Request (Octet 16 - Bit 4) Reject Synchronous Connection Request (Octet 16 - Bit 5) Read Extended Inquiry Response (Octet 17 - Bit 0) Write Extended Inquiry Response (Octet 17 - Bit 1) Refresh Encryption Key (Octet 17 - Bit 2) Sniff Subrating (Octet 17 - Bit 4) Read Simple Pairing Mode (Octet 17 - Bit 5) Write Simple Pairing Mode (Octet 17 - Bit 6) Read Local OOB Data (Octet 17 - Bit 7) Read Inquiry Response TX Power Level (Octet 18 - Bit 0) Write Inquiry Transmit Power Level (Octet 18 - Bit 1) IO Capability Request Reply (Octet 18 - Bit 7) User Confirmation Request Reply (Octet 19 - Bit 0) User Confirmation Request Neg Reply (Octet 19 - Bit 1) User Passkey Request Reply (Octet 19 - Bit 2) User Passkey Request Negative Reply (Octet 19 - Bit 3) Remote OOB Data Request Reply (Octet 19 - Bit 4) Write Simple Pairing Debug Mode (Octet 19 - Bit 5) Enhanced Flush (Octet 19 - Bit 6) Remote OOB Data Request Neg Reply (Octet 19 - Bit 7) Send Keypress Notification (Octet 20 - Bit 2) IO Capability Request Negative Reply (Octet 20 - Bit 3) Read Encryption Key Size (Octet 20 - Bit 4) Read Enhanced Transmit Power Level (Octet 24 - Bit 0) Read LE Host Supported (Octet 24 - Bit 5) Write LE Host Supported (Octet 24 - Bit 6) LE Set Event Mask (Octet 25 - Bit 0) LE Read Buffer Size (Octet 25 - Bit 1) LE Read Local Supported Features (Octet 25 - Bit 2) LE Set Random Address (Octet 25 - Bit 4) LE Set Advertising Parameters (Octet 25 - Bit 5) LE Read Advertising Channel TX Power (Octet 25 - Bit 6) LE Set Advertising Data (Octet 25 - Bit 7) LE Set Scan Response Data (Octet 26 - Bit 0) LE Set Advertise Enable (Octet 26 - Bit 1) LE Set Scan Parameters (Octet 26 - Bit 2) LE Set Scan Enable (Octet 26 - Bit 3) LE Create Connection (Octet 26 - Bit 4) LE Create Connection Cancel (Octet 26 - Bit 5) LE Read White List Size (Octet 26 - Bit 6) LE Clear White List (Octet 26 - Bit 7) LE Add Device To White List (Octet 27 - Bit 0) LE Remove Device From White List (Octet 27 - Bit 1) LE Connection Update (Octet 27 - Bit 2) LE Set Host Channel Classification (Octet 27 - Bit 3) LE Read Channel Map (Octet 27 - Bit 4) LE Read Remote Used Features (Octet 27 - Bit 5) LE Encrypt (Octet 27 - Bit 6) LE Rand (Octet 27 - Bit 7) LE Start Encryption (Octet 28 - Bit 0) LE Long Term Key Request Reply (Octet 28 - Bit 1) LE Long Term Key Request Neg Reply (Octet 28 - Bit 2) LE Read Supported States (Octet 28 - Bit 3) LE Receiver Test (Octet 28 - Bit 4) LE Transmitter Test (Octet 28 - Bit 5) LE Test End (Octet 28 - Bit 6) < HCI Command: Write Simple Pairing.. (0x03|0x0056) plen 1 #43 [hci1] 8.951956 Mode: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #44 [hci1] 8.953902 Write Simple Pairing Mode (0x03|0x0056) ncmd 1 Status: Success (0x00) < HCI Command: Write Inquiry Mode (0x03|0x0045) plen 1 #45 [hci1] 8.953973 Mode: Inquiry Result with RSSI or Extended Inquiry Result (0x02) > HCI Event: Command Complete (0x0e) plen 4 #46 [hci1] 8.956884 Write Inquiry Mode (0x03|0x0045) ncmd 1 Status: Success (0x00) < HCI Command: Read Inquiry Respons.. (0x03|0x0058) plen 0 #47 [hci1] 8.956939 > HCI Event: Command Complete (0x0e) plen 5 #48 [hci1] 8.959883 Read Inquiry Response TX Power Level (0x03|0x0058) ncmd 1 Status: Success (0x00) TX power: 4 dbm (0x04) < HCI Command: Read Local Extended... (0x04|0x0004) plen 1 #49 [hci1] 8.959928 Page: 1 > HCI Event: Command Complete (0x0e) plen 14 #50 [hci1] 8.962882 Read Local Extended Features (0x04|0x0004) ncmd 1 Status: Success (0x00) Page: 1/1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) < HCI Command: Set Event Mask (0x03|0x0001) plen 8 #51 [hci1] 8.962977 Mask: 0x3dbff807fffbffff Inquiry Complete Inquiry Result Connection Complete Connection Request Disconnection Complete Authentication Complete Remote Name Request Complete Encryption Change Change Connection Link Key Complete Master Link Key Complete Read Remote Supported Features Complete Read Remote Version Information Complete QoS Setup Complete Command Complete Command Status Hardware Error Flush Occurred Role Change Mode Change Return Link Keys PIN Code Request Link Key Request Link Key Notification Loopback Command Data Buffer Overflow Max Slots Change Read Clock Offset Complete Connection Packet Type Changed QoS Violation Page Scan Mode Change Page Scan Repetition Mode Change Flow Specification Complete Inquiry Result with RSSI Read Remote Extended Features Complete Synchronous Connection Complete Synchronous Connection Changed Sniff Subrating Extended Inquiry Result Encryption Key Refresh Complete IO Capability Request IO Capability Request Reply User Confirmation Request User Passkey Request Remote OOB Data Request Simple Pairing Complete Link Supervision Timeout Changed Enhanced Flush Complete User Passkey Notification Keypress Notification Remote Host Supported Features Notification LE Meta > HCI Event: Command Complete (0x0e) plen 4 #52 [hci1] 8.965884 Set Event Mask (0x03|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 #53 [hci1] 8.965939 Address: 00:00:00:00:00:00 (OUI 00-00-00) Read all: 0x01 > HCI Event: Command Complete (0x0e) plen 8 #54 [hci1] 8.968884 Read Stored Link Key (0x03|0x000d) ncmd 1 Status: Success (0x00) Max num keys: 16 Num keys: 0 < HCI Command: Write Default Link P.. (0x02|0x000f) plen 2 #55 [hci1] 8.968924 Link policy: 0x000f Enable Role Switch Enable Hold Mode Enable Sniff Mode Enable Park State > HCI Event: Command Complete (0x0e) plen 4 #56 [hci1] 8.971886 Write Default Link Policy Settings (0x02|0x000f) ncmd 1 Status: Success (0x00) < HCI Command: Read Page Scan Activ.. (0x03|0x001b) plen 0 #57 [hci1] 8.971925 > HCI Event: Command Complete (0x0e) plen 8 #58 [hci1] 8.974884 Read Page Scan Activity (0x03|0x001b) ncmd 1 Status: Success (0x00) Interval: 1280.000 msec (0x0800) Window: 11.250 msec (0x0012) < HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 #59 [hci1] 8.974938 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci1] 8.977879 Read Page Scan Type (0x03|0x0046) ncmd 1 Status: Success (0x00) Type: Standard Scan (0x00) < HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #61 [hci1] 8.977912 Mask: 0x000000000000001f LE Connection Complete LE Advertising Report LE Connection Update Complete LE Read Remote Used Features Complete LE Long Term Key Request > HCI Event: Command Complete (0x0e) plen 4 #62 [hci1] 8.980881 LE Set Event Mask (0x08|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Advertising... (0x08|0x0007) plen 0 #63 [hci1] 8.980911 > HCI Event: Command Complete (0x0e) plen 5 #64 [hci1] 8.983882 LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1 Status: Success (0x00) TX power: 8 dbm (0x08) < HCI Command: LE Read White List S.. (0x08|0x000f) plen 0 #65 [hci1] 8.983914 > HCI Event: Command Complete (0x0e) plen 5 #66 [hci1] 8.986881 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #67 [hci1] 8.986917 > HCI Event: Command Complete (0x0e) plen 4 #68 [hci1] 8.989882 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: Write LE Host Suppor.. (0x03|0x006d) plen 2 #69 [hci1] 8.989912 Supported: 0x01 Simultaneous: 0x00 > HCI Event: Command Complete (0x0e) plen 4 #70 [hci1] 8.992883 Write LE Host Supported (0x03|0x006d) ncmd 1 Status: Success (0x00) < HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7 #71 [hci1] 8.992944 Address: 00:00:00:00:00:00 (OUI 00-00-00) Delete all: 0x01 > HCI Event: Command Complete (0x0e) plen 6 #72 [hci1] 8.995884 Delete Stored Link Key (0x03|0x0012) ncmd 1 Status: Success (0x00) Num keys: 0 = Index Info: 00:15:83:EF:21:57 (Cambridge Silicon Radio) [hci1] 8.995940 < HCI Command: LE Set Advertising... (0x08|0x0008) plen 32 #73 [hci1] 8.996020 Length: 3 TX power: 8 dBm > HCI Event: Command Complete (0x0e) plen 4 #74 [hci1] 8.998888 LE Set Advertising Data (0x08|0x0008) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Respons.. (0x08|0x0009) plen 32 #75 [hci1] 8.998936 Length: 13 Name (short): raspberryp > HCI Event: Command Complete (0x0e) plen 4 #76 [hci1] 9.001927 LE Set Scan Response Data (0x08|0x0009) ncmd 1 Status: Success (0x00) < HCI Command: Write Local Name (0x03|0x0013) plen 248 #77 [hci1] 9.002035 Name: raspberrypi > HCI Event: Command Complete (0x0e) plen 4 #78 [hci1] 9.005889 Write Local Name (0x03|0x0013) ncmd 1 Status: Success (0x00) < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #79 [hci1] 9.005944 FEC: Not required (0x00) Name (complete): raspberrypi TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) > HCI Event: Command Complete (0x0e) plen 4 #80 [hci1] 9.010888 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci1] 9.010950 Set Powered (0x0005) plen 4 Status: Success (0x00) Current settings: 0x00000ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci1] 9.010962 Current settings: 0x00000ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci1] 9.011159 UUID: 0000110e-0000-1000-8000-00805f9b34fb Service class: 0x00 < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #81 [hci1] 9.011190 FEC: Not required (0x00) Name (complete): raspberrypi TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 1 entry A/V Remote Control (0x110e) > HCI Event: Command Complete (0x0e) plen 4 #82 [hci1] 9.015897 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci1] 9.015954 Add UUID (0x0010) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci1] 9.016269 UUID: 0000110c-0000-1000-8000-00805f9b34fb Service class: 0x00 < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #83 [hci1] 9.016321 FEC: Not required (0x00) Name (complete): raspberrypi TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 2 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 #84 [hci1] 9.021900 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci1] 9.021961 Add UUID (0x0010) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Unblock Device (0x0027) plen 7 {0x0001} [hci1] 9.022161 BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Event: Device Unblocked (0x0015) plen 7 {0x0002} [hci1] 9.022172 BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci1] 9.022184 Unblock Device (0x0027) plen 7 Status: Success (0x00) BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Command: Load Link Keys (0x0012) plen 3 {0x0001} [hci1] 9.022261 Debug keys: Disabled (0x00) Keys: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci1] 9.022268 Load Link Keys (0x0012) plen 0 Status: Success (0x00) @ MGMT Command: Load Long Term Keys (0x0013) plen 2 {0x0001} [hci1] 9.022343 Keys: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci1] 9.022350 Load Long Term Keys (0x0013) plen 0 Status: Success (0x00) @ MGMT Command: Load Identity Resol.. (0x0030) plen 2 {0x0001} [hci1] 9.022423 Keys: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci1] 9.022430 Load Identity Resolving Keys (0x0030) plen 0 Status: Success (0x00) @ MGMT Command: Load Connection Par.. (0x0035) plen 2 {0x0001} [hci1] 9.022499 Parameters: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci1] 9.022506 Load Connection Parameters (0x0035) plen 0 Status: Success (0x00) @ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci1] 9.022590 UUID: 00001200-0000-1000-8000-00805f9b34fb Service class: 0x00 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci1] 9.022602 Add UUID (0x0010) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Set Device ID (0x0028) plen 8 {0x0001} [hci1] 9.022680 Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci1] 9.022686 Set Device ID (0x0028) plen 0 Status: Success (0x00) @ MGMT Command: Set Device Class (0x000e) plen 2 {0x0001} [hci1] 9.022758 Major class: 0x00 Minor class: 0x00 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci1] 9.022765 Set Device Class (0x000e) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci1] 9.022836 Name: BlueZ 5.50 Short name: < HCI Command: Write Local Name (0x03|0x0013) plen 248 #85 [hci1] 9.022870 Name: BlueZ 5.50 > HCI Event: Command Complete (0x0e) plen 4 #86 [hci1] 9.025906 Write Local Name (0x03|0x0013) ncmd 1 Status: Success (0x00) @ MGMT Event: Local Name Changed (0x0008) plen 260 {0x0002} [hci1] 9.025948 Name: BlueZ 5.50 Short name: < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #87 [hci1] 9.025979 FEC: Not required (0x00) Name (complete): BlueZ 5.50 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 2 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 #88 [hci1] 9.030894 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 263 {0x0001} [hci1] 9.030933 Set Local Name (0x000f) plen 260 Status: Success (0x00) Name: BlueZ 5.50 Short name: @ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci0] 9.031122 UUID: 00000000-0000-0000-0000-000000000000 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 9.031155 Remove UUID (0x0011) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Remove Device (0x0034) plen 7 {0x0001} [hci0] 9.031258 BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 9.031284 Remove Device (0x0034) plen 7 Status: Success (0x00) BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Command: Set Privacy (0x002f) plen 17 {0x0001} [hci0] 9.031370 Privacy: Disabled (0x00) Key: 00000000000000000000000000000000 @ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 9.031378 Set Privacy (0x002f) plen 4 Status: Success (0x00) Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Command: Read Advertising Fe.. (0x003d) plen 0 {0x0001} [hci0] 9.031449 @ MGMT Event: Command Complete (0x0001) plen 11 {0x0001} [hci0] 9.031457 Read Advertising Features (0x003d) plen 8 Status: Success (0x00) Flags: 0x0000007f Switch into Connectable mode Advertise as Discoverable Advertise as Limited Discoverable Add Flags field to Advertising Data Add TX Power field to Advertising Data Add Appearance field to Scan Response Add Local Name in Scan Response Advertising data length: 31 Scan response length: 31 Max instances: 5 Instances: 0 @ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci0] 9.031527 Powered: Enabled (0x01) = Open Index: 00:15:83:D1:1C:52 #10 [hci0] 9.031583 < HCI Command: Reset (0x03|0x0003) plen 0 #11 [hci0] 9.031613 > HCI Event: Command Complete (0x0e) plen 4 #12 [hci0] 9.158052 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported.. (0x04|0x0003) plen 0 #13 [hci0] 9.158111 > HCI Event: Command Complete (0x0e) plen 12 #14 [hci0] 9.161040 Read Local Supported Features (0x04|0x0003) ncmd 1 Status: Success (0x00) Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x87 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Hold mode Sniff mode Park state Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Paging parameter negotiation Power control Transparent synchronous data Broadcast Encryption Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) EV4 packets EV5 packets AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Enhanced Data Rate eSCO 2 Mbps mode Enhanced Data Rate eSCO 3 Mbps mode 3-slot Enhanced Data Rate eSCO packets Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control Extended features < HCI Command: Read Local Version I.. (0x04|0x0001) plen 0 #15 [hci0] 9.161093 > HCI Event: Command Complete (0x0e) plen 12 #16 [hci0] 9.164037 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 4.0 (0x06) - Revision 8891 (0x22bb) LMP version: Bluetooth 4.0 (0x06) - Subversion 8891 (0x22bb) Manufacturer: Cambridge Silicon Radio (10) < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #17 [hci0] 9.164082 > HCI Event: Command Complete (0x0e) plen 10 #18 [hci0] 9.167034 Read BD ADDR (0x04|0x0009) ncmd 1 Status: Success (0x00) Address: 00:15:83:D1:1C:52 (IVT corporation) < HCI Command: Read Buffer Size (0x04|0x0005) plen 0 #19 [hci0] 9.167118 > HCI Event: Command Complete (0x0e) plen 11 #20 [hci0] 9.170037 Read Buffer Size (0x04|0x0005) ncmd 1 Status: Success (0x00) ACL MTU: 310 ACL max packet: 10 SCO MTU: 64 SCO max packet: 8 < HCI Command: Read Class of Device (0x03|0x0023) plen 0 #21 [hci0] 9.170071 > HCI Event: Command Complete (0x0e) plen 7 #22 [hci0] 9.173036 Read Class of Device (0x03|0x0023) ncmd 1 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 < HCI Command: Read Local Name (0x03|0x0014) plen 0 #23 [hci0] 9.173113 > HCI Event: Command Complete (0x0e) plen 252 #24 [hci0] 9.194037 Read Local Name (0x03|0x0014) ncmd 1 Status: Success (0x00) Name: CSR8510 A10 < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 #25 [hci0] 9.194088 > HCI Event: Command Complete (0x0e) plen 6 #26 [hci0] 9.196043 Read Voice Setting (0x03|0x0025) ncmd 1 Status: Success (0x00) Setting: 0x0060 Input Coding: Linear Input Data Format: 2's complement Input Sample Size: 16-bit # of bits padding at MSB: 0 Air Coding Format: CVSD < HCI Command: Read Number of Suppo.. (0x03|0x0038) plen 0 #27 [hci0] 9.196076 > HCI Event: Command Complete (0x0e) plen 5 #28 [hci0] 9.197042 Read Number of Supported IAC (0x03|0x0038) ncmd 1 Status: Success (0x00) Number of IAC: 2 < HCI Command: Read Current IAC LAP (0x03|0x0039) plen 0 #29 [hci0] 9.197072 > HCI Event: Command Complete (0x0e) plen 8 #30 [hci0] 9.198042 Read Current IAC LAP (0x03|0x0039) ncmd 1 Status: Success (0x00) Number of IAC: 1 Access code: 0x9e8b33 (General Inquiry) < HCI Command: Set Event Filter (0x03|0x0005) plen 1 #31 [hci0] 9.198071 Type: Clear All Filters (0x00) > HCI Event: Command Complete (0x0e) plen 4 #32 [hci0] 9.199043 Set Event Filter (0x03|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: Write Connection Acc.. (0x03|0x0016) plen 2 #33 [hci0] 9.199077 Timeout: 20000.000 msec (0x7d00) > HCI Event: Command Complete (0x0e) plen 4 #34 [hci0] 9.200042 Write Connection Accept Timeout (0x03|0x0016) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #35 [hci0] 9.200073 > HCI Event: Command Complete (0x0e) plen 7 #36 [hci0] 9.201047 LE Read Buffer Size (0x08|0x0002) ncmd 1 Status: Success (0x00) Data packet length: 0 Num data packets: 0 < HCI Command: LE Read Local Suppor.. (0x08|0x0003) plen 0 #37 [hci0] 9.201089 > HCI Event: Command Complete (0x0e) plen 12 #38 [hci0] 9.202048 LE Read Local Supported Features (0x08|0x0003) ncmd 1 Status: Success (0x00) Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 LE Encryption < HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0 #39 [hci0] 9.202094 > HCI Event: Command Complete (0x0e) plen 12 #40 [hci0] 9.203046 LE Read Supported States (0x08|0x001c) ncmd 1 Status: Success (0x00) States: 0x000000001fffffff Non-connectable Advertising State Scannable Advertising State Connectable Advertising State High Duty Cycle Directed Advertising State Passive Scanning State Active Scanning State Initiating State and Connection State (Master Role) Connection State (Slave Role) Non-connectable Advertising State and Passive Scanning State Scannable Advertising State and Passive Scanning State Connectable Advertising State and Passive Scanning State High Duty Cycle Directed Advertising State and Passive Scanning State Non-connectable Advertising State and Active Scanning State Scannable Advertising State and Active Scanning State Connectable Advertising State and Active Scanning State High Duty Cycle Directed Advertising State and Active Scanning State Non-connectable Advertising State and Initiating State Scannable Advertising State and Initiating State Non-connectable Advertising State and Connection State (Master Role) Scannable Advertising State and Connection State (Master Role) Non-connectable Advertising State and Connection State (Slave Role) Scannable Advertising State and Connection State (Slave Role) Passive Scanning State and Initiating State Active Scanning State and Initiating State Passive Scanning State and Connection State (Master Role) Active Scanning State and Connection State (Master Role) Passive Scanning State and Connection State (Slave Role) Active Scanning State and Connection State (Slave Role) Initiating State and Connection State (Master Role) and Master Role & Master Role < HCI Command: Read Local Supported.. (0x04|0x0002) plen 0 #41 [hci0] 9.203089 > HCI Event: Command Complete (0x0e) plen 68 #42 [hci0] 9.209043 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 170 entries Inquiry (Octet 0 - Bit 0) Inquiry Cancel (Octet 0 - Bit 1) Periodic Inquiry Mode (Octet 0 - Bit 2) Exit Periodic Inquiry Mode (Octet 0 - Bit 3) Create Connection (Octet 0 - Bit 4) Disconnect (Octet 0 - Bit 5) Add SCO Connection (Octet 0 - Bit 6) Create Connection Cancel (Octet 0 - Bit 7) Accept Connection Request (Octet 1 - Bit 0) Reject Connection Request (Octet 1 - Bit 1) Link Key Request Reply (Octet 1 - Bit 2) Link Key Request Negative Reply (Octet 1 - Bit 3) PIN Code Request Reply (Octet 1 - Bit 4) PIN Code Request Negative Reply (Octet 1 - Bit 5) Change Connection Packet Type (Octet 1 - Bit 6) Authentication Requested (Octet 1 - Bit 7) Set Connection Encryption (Octet 2 - Bit 0) Change Connection Link Key (Octet 2 - Bit 1) Master Link Key (Octet 2 - Bit 2) Remote Name Request (Octet 2 - Bit 3) Remote Name Request Cancel (Octet 2 - Bit 4) Read Remote Supported Features (Octet 2 - Bit 5) Read Remote Extended Features (Octet 2 - Bit 6) Read Remote Version Information (Octet 2 - Bit 7) Read Clock Offset (Octet 3 - Bit 0) Read LMP Handle (Octet 3 - Bit 1) Hold Mode (Octet 4 - Bit 1) Sniff Mode (Octet 4 - Bit 2) Exit Sniff Mode (Octet 4 - Bit 3) Park State (Octet 4 - Bit 4) Exit Park State (Octet 4 - Bit 5) QoS Setup (Octet 4 - Bit 6) Role Discovery (Octet 4 - Bit 7) Switch Role (Octet 5 - Bit 0) Read Link Policy Settings (Octet 5 - Bit 1) Write Link Policy Settings (Octet 5 - Bit 2) Read Default Link Policy Settings (Octet 5 - Bit 3) Write Default Link Policy Settings (Octet 5 - Bit 4) Flow Specification (Octet 5 - Bit 5) Set Event Mask (Octet 5 - Bit 6) Reset (Octet 5 - Bit 7) Set Event Filter (Octet 6 - Bit 0) Flush (Octet 6 - Bit 1) Read PIN Type (Octet 6 - Bit 2) Write PIN Type (Octet 6 - Bit 3) Create New Unit Key (Octet 6 - Bit 4) Read Stored Link Key (Octet 6 - Bit 5) Write Stored Link Key (Octet 6 - Bit 6) Delete Stored Link Key (Octet 6 - Bit 7) Write Local Name (Octet 7 - Bit 0) Read Local Name (Octet 7 - Bit 1) Read Connection Accept Timeout (Octet 7 - Bit 2) Write Connection Accept Timeout (Octet 7 - Bit 3) Read Page Timeout (Octet 7 - Bit 4) Write Page Timeout (Octet 7 - Bit 5) Read Scan Enable (Octet 7 - Bit 6) Write Scan Enable (Octet 7 - Bit 7) Read Page Scan Activity (Octet 8 - Bit 0) Write Page Scan Activity (Octet 8 - Bit 1) Read Inquiry Scan Activity (Octet 8 - Bit 2) Write Inquiry Scan Activity (Octet 8 - Bit 3) Read Authentication Enable (Octet 8 - Bit 4) Write Authentication Enable (Octet 8 - Bit 5) Read Encryption Mode (Octet 8 - Bit 6) Write Encryption Mode (Octet 8 - Bit 7) Read Class of Device (Octet 9 - Bit 0) Write Class of Device (Octet 9 - Bit 1) Read Voice Setting (Octet 9 - Bit 2) Write Voice Setting (Octet 9 - Bit 3) Read Automatic Flush Timeout (Octet 9 - Bit 4) Write Automatic Flush Timeout (Octet 9 - Bit 5) Read Num Broadcast Retransmissions (Octet 9 - Bit 6) Write Num Broadcast Retransmissions (Octet 9 - Bit 7) Read Hold Mode Activity (Octet 10 - Bit 0) Write Hold Mode Activity (Octet 10 - Bit 1) Read Transmit Power Level (Octet 10 - Bit 2) Read Sync Flow Control Enable (Octet 10 - Bit 3) Write Sync Flow Control Enable (Octet 10 - Bit 4) Set Controller To Host Flow Control (Octet 10 - Bit 5) Host Buffer Size (Octet 10 - Bit 6) Host Number of Completed Packets (Octet 10 - Bit 7) Read Link Supervision Timeout (Octet 11 - Bit 0) Write Link Supervision Timeout (Octet 11 - Bit 1) Read Number of Supported IAC (Octet 11 - Bit 2) Read Current IAC LAP (Octet 11 - Bit 3) Write Current IAC LAP (Octet 11 - Bit 4) Read Page Scan Period Mode (Octet 11 - Bit 5) Write Page Scan Period Mode (Octet 11 - Bit 6) Read Page Scan Mode (Octet 11 - Bit 7) Write Page Scan Mode (Octet 12 - Bit 0) Set AFH Host Channel Classification (Octet 12 - Bit 1) Read Inquiry Scan Type (Octet 12 - Bit 4) Write Inquiry Scan Type (Octet 12 - Bit 5) Read Inquiry Mode (Octet 12 - Bit 6) Write Inquiry Mode (Octet 12 - Bit 7) Read Page Scan Type (Octet 13 - Bit 0) Write Page Scan Type (Octet 13 - Bit 1) Read AFH Channel Assessment Mode (Octet 13 - Bit 2) Write AFH Channel Assessment Mode (Octet 13 - Bit 3) Read Local Version Information (Octet 14 - Bit 3) Read Local Supported Features (Octet 14 - Bit 5) Read Local Extended Features (Octet 14 - Bit 6) Read Buffer Size (Octet 14 - Bit 7) Read BD ADDR (Octet 15 - Bit 1) Read Failed Contact Counter (Octet 15 - Bit 2) Reset Failed Contact Counter (Octet 15 - Bit 3) Read Link Quality (Octet 15 - Bit 4) Read RSSI (Octet 15 - Bit 5) Read AFH Channel Map (Octet 15 - Bit 6) Read Clock (Octet 15 - Bit 7) Read Loopback Mode (Octet 16 - Bit 0) Write Loopback Mode (Octet 16 - Bit 1) Enable Device Under Test Mode (Octet 16 - Bit 2) Setup Synchronous Connection (Octet 16 - Bit 3) Accept Synchronous Connection Request (Octet 16 - Bit 4) Reject Synchronous Connection Request (Octet 16 - Bit 5) Read Extended Inquiry Response (Octet 17 - Bit 0) Write Extended Inquiry Response (Octet 17 - Bit 1) Refresh Encryption Key (Octet 17 - Bit 2) Sniff Subrating (Octet 17 - Bit 4) Read Simple Pairing Mode (Octet 17 - Bit 5) Write Simple Pairing Mode (Octet 17 - Bit 6) Read Local OOB Data (Octet 17 - Bit 7) Read Inquiry Response TX Power Level (Octet 18 - Bit 0) Write Inquiry Transmit Power Level (Octet 18 - Bit 1) IO Capability Request Reply (Octet 18 - Bit 7) User Confirmation Request Reply (Octet 19 - Bit 0) User Confirmation Request Neg Reply (Octet 19 - Bit 1) User Passkey Request Reply (Octet 19 - Bit 2) User Passkey Request Negative Reply (Octet 19 - Bit 3) Remote OOB Data Request Reply (Octet 19 - Bit 4) Write Simple Pairing Debug Mode (Octet 19 - Bit 5) Enhanced Flush (Octet 19 - Bit 6) Remote OOB Data Request Neg Reply (Octet 19 - Bit 7) Send Keypress Notification (Octet 20 - Bit 2) IO Capability Request Negative Reply (Octet 20 - Bit 3) Read Encryption Key Size (Octet 20 - Bit 4) Read Enhanced Transmit Power Level (Octet 24 - Bit 0) Read LE Host Supported (Octet 24 - Bit 5) Write LE Host Supported (Octet 24 - Bit 6) LE Set Event Mask (Octet 25 - Bit 0) LE Read Buffer Size (Octet 25 - Bit 1) LE Read Local Supported Features (Octet 25 - Bit 2) LE Set Random Address (Octet 25 - Bit 4) LE Set Advertising Parameters (Octet 25 - Bit 5) LE Read Advertising Channel TX Power (Octet 25 - Bit 6) LE Set Advertising Data (Octet 25 - Bit 7) LE Set Scan Response Data (Octet 26 - Bit 0) LE Set Advertise Enable (Octet 26 - Bit 1) LE Set Scan Parameters (Octet 26 - Bit 2) LE Set Scan Enable (Octet 26 - Bit 3) LE Create Connection (Octet 26 - Bit 4) LE Create Connection Cancel (Octet 26 - Bit 5) LE Read White List Size (Octet 26 - Bit 6) LE Clear White List (Octet 26 - Bit 7) LE Add Device To White List (Octet 27 - Bit 0) LE Remove Device From White List (Octet 27 - Bit 1) LE Connection Update (Octet 27 - Bit 2) LE Set Host Channel Classification (Octet 27 - Bit 3) LE Read Channel Map (Octet 27 - Bit 4) LE Read Remote Used Features (Octet 27 - Bit 5) LE Encrypt (Octet 27 - Bit 6) LE Rand (Octet 27 - Bit 7) LE Start Encryption (Octet 28 - Bit 0) LE Long Term Key Request Reply (Octet 28 - Bit 1) LE Long Term Key Request Neg Reply (Octet 28 - Bit 2) LE Read Supported States (Octet 28 - Bit 3) LE Receiver Test (Octet 28 - Bit 4) LE Transmitter Test (Octet 28 - Bit 5) LE Test End (Octet 28 - Bit 6) < HCI Command: Write Simple Pairing.. (0x03|0x0056) plen 1 #43 [hci0] 9.209099 Mode: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #44 [hci0] 9.211050 Write Simple Pairing Mode (0x03|0x0056) ncmd 1 Status: Success (0x00) < HCI Command: Write Inquiry Mode (0x03|0x0045) plen 1 #45 [hci0] 9.211093 Mode: Inquiry Result with RSSI or Extended Inquiry Result (0x02) > HCI Event: Command Complete (0x0e) plen 4 #46 [hci0] 9.212048 Write Inquiry Mode (0x03|0x0045) ncmd 1 Status: Success (0x00) < HCI Command: Read Inquiry Respons.. (0x03|0x0058) plen 0 #47 [hci0] 9.212087 > HCI Event: Command Complete (0x0e) plen 5 #48 [hci0] 9.213045 Read Inquiry Response TX Power Level (0x03|0x0058) ncmd 1 Status: Success (0x00) TX power: 4 dbm (0x04) < HCI Command: Read Local Extended... (0x04|0x0004) plen 1 #49 [hci0] 9.213079 Page: 1 > HCI Event: Command Complete (0x0e) plen 14 #50 [hci0] 9.214053 Read Local Extended Features (0x04|0x0004) ncmd 1 Status: Success (0x00) Page: 1/1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) < HCI Command: Set Event Mask (0x03|0x0001) plen 8 #51 [hci0] 9.214137 Mask: 0x3dbff807fffbffff Inquiry Complete Inquiry Result Connection Complete Connection Request Disconnection Complete Authentication Complete Remote Name Request Complete Encryption Change Change Connection Link Key Complete Master Link Key Complete Read Remote Supported Features Complete Read Remote Version Information Complete QoS Setup Complete Command Complete Command Status Hardware Error Flush Occurred Role Change Mode Change Return Link Keys PIN Code Request Link Key Request Link Key Notification Loopback Command Data Buffer Overflow Max Slots Change Read Clock Offset Complete Connection Packet Type Changed QoS Violation Page Scan Mode Change Page Scan Repetition Mode Change Flow Specification Complete Inquiry Result with RSSI Read Remote Extended Features Complete Synchronous Connection Complete Synchronous Connection Changed Sniff Subrating Extended Inquiry Result Encryption Key Refresh Complete IO Capability Request IO Capability Request Reply User Confirmation Request User Passkey Request Remote OOB Data Request Simple Pairing Complete Link Supervision Timeout Changed Enhanced Flush Complete User Passkey Notification Keypress Notification Remote Host Supported Features Notification LE Meta > HCI Event: Command Complete (0x0e) plen 4 #52 [hci0] 9.217047 Set Event Mask (0x03|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 #53 [hci0] 9.217080 Address: 00:00:00:00:00:00 (OUI 00-00-00) Read all: 0x01 > HCI Event: Command Complete (0x0e) plen 8 #54 [hci0] 9.218048 Read Stored Link Key (0x03|0x000d) ncmd 1 Status: Success (0x00) Max num keys: 16 Num keys: 0 < HCI Command: Write Default Link P.. (0x02|0x000f) plen 2 #55 [hci0] 9.218079 Link policy: 0x000f Enable Role Switch Enable Hold Mode Enable Sniff Mode Enable Park State > HCI Event: Command Complete (0x0e) plen 4 #56 [hci0] 9.219051 Write Default Link Policy Settings (0x02|0x000f) ncmd 1 Status: Success (0x00) < HCI Command: Read Page Scan Activ.. (0x03|0x001b) plen 0 #57 [hci0] 9.219097 > HCI Event: Command Complete (0x0e) plen 8 #58 [hci0] 9.220046 Read Page Scan Activity (0x03|0x001b) ncmd 1 Status: Success (0x00) Interval: 1280.000 msec (0x0800) Window: 11.250 msec (0x0012) < HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 #59 [hci0] 9.220079 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 9.221049 Read Page Scan Type (0x03|0x0046) ncmd 1 Status: Success (0x00) Type: Standard Scan (0x00) < HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #61 [hci0] 9.221080 Mask: 0x000000000000001f LE Connection Complete LE Advertising Report LE Connection Update Complete LE Read Remote Used Features Complete LE Long Term Key Request > HCI Event: Command Complete (0x0e) plen 4 #62 [hci0] 9.222064 LE Set Event Mask (0x08|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Advertising... (0x08|0x0007) plen 0 #63 [hci0] 9.222108 > HCI Event: Command Complete (0x0e) plen 5 #64 [hci0] 9.225046 LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1 Status: Success (0x00) TX power: 8 dbm (0x08) < HCI Command: LE Read White List S.. (0x08|0x000f) plen 0 #65 [hci0] 9.225079 > HCI Event: Command Complete (0x0e) plen 5 #66 [hci0] 9.226046 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #67 [hci0] 9.226075 > HCI Event: Command Complete (0x0e) plen 4 #68 [hci0] 9.227061 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: Write LE Host Suppor.. (0x03|0x006d) plen 2 #69 [hci0] 9.227112 Supported: 0x01 Simultaneous: 0x00 > HCI Event: Command Complete (0x0e) plen 4 #70 [hci0] 9.228049 Write LE Host Supported (0x03|0x006d) ncmd 1 Status: Success (0x00) < HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7 #71 [hci0] 9.228110 Address: 00:00:00:00:00:00 (OUI 00-00-00) Delete all: 0x01 > HCI Event: Command Complete (0x0e) plen 6 #72 [hci0] 9.229049 Delete Stored Link Key (0x03|0x0012) ncmd 1 Status: Success (0x00) Num keys: 0 = Index Info: 00:15:83:D1:1C:52 (Cambridge Silicon Radio) [hci0] 9.229095 < HCI Command: LE Set Advertising... (0x08|0x0008) plen 32 #73 [hci0] 9.229170 Length: 3 TX power: 8 dBm > HCI Event: Command Complete (0x0e) plen 4 #74 [hci0] 9.232056 LE Set Advertising Data (0x08|0x0008) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Respons.. (0x08|0x0009) plen 32 #75 [hci0] 9.232105 Length: 13 Name (short): raspberryp > HCI Event: Command Complete (0x0e) plen 4 #76 [hci0] 9.233052 LE Set Scan Response Data (0x08|0x0009) ncmd 1 Status: Success (0x00) < HCI Command: Write Local Name (0x03|0x0013) plen 248 #77 [hci0] 9.233089 Name: raspberrypi #1 > HCI Event: Command Complete (0x0e) plen 4 #78 [hci0] 9.235050 Write Local Name (0x03|0x0013) ncmd 1 Status: Success (0x00) < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #79 [hci0] 9.235101 FEC: Not required (0x00) Name (complete): raspberrypi #1 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) > HCI Event: Command Complete (0x0e) plen 4 #80 [hci0] 9.240052 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 9.240113 Set Powered (0x0005) plen 4 Status: Success (0x00) Current settings: 0x00000ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 9.240127 Current settings: 0x00000ad1 Powered Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections @ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 9.240325 UUID: 0000110e-0000-1000-8000-00805f9b34fb Service class: 0x00 < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #81 [hci0] 9.240359 FEC: Not required (0x00) Name (complete): raspberrypi #1 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 1 entry A/V Remote Control (0x110e) > HCI Event: Command Complete (0x0e) plen 4 #82 [hci0] 9.246056 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 9.246112 Add UUID (0x0010) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 9.246374 UUID: 0000110c-0000-1000-8000-00805f9b34fb Service class: 0x00 < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #83 [hci0] 9.246464 FEC: Not required (0x00) Name (complete): raspberrypi #1 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 2 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 #84 [hci0] 9.251049 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 9.251082 Add UUID (0x0010) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Unblock Device (0x0027) plen 7 {0x0001} [hci0] 9.251250 BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Event: Device Unblocked (0x0015) plen 7 {0x0002} [hci0] 9.251261 BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 9.251272 Unblock Device (0x0027) plen 7 Status: Success (0x00) BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00) @ MGMT Command: Add Device (0x0033) plen 8 {0x0001} [hci0] 9.251397 BR/EDR Address: 00:06:F5:E1:2B:CA (ALPS ELECTRIC CO., LTD.) Action: Allow incoming connection (0x01) @ MGMT Event: Device Added (0x001a) plen 8 {0x0002} [hci0] 9.251421 BR/EDR Address: 00:06:F5:E1:2B:CA (ALPS ELECTRIC CO., LTD.) Action: Allow incoming connection (0x01) @ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 9.251436 Add Device (0x0033) plen 7 Status: Success (0x00) BR/EDR Address: 00:06:F5:E1:2B:CA (ALPS ELECTRIC CO., LTD.) < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 #85 [hci0] 9.251489 Scan enable: Page Scan (0x02) @ MGMT Command: Load Link Keys (0x0012) plen 3 {0x0001} [hci0] 9.251564 Debug keys: Disabled (0x00) Keys: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 9.251572 Load Link Keys (0x0012) plen 0 Status: Success (0x00) @ MGMT Command: Load Long Term Keys (0x0013) plen 2 {0x0001} [hci0] 9.251644 Keys: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 9.251652 Load Long Term Keys (0x0013) plen 0 Status: Success (0x00) @ MGMT Command: Load Identity Resol.. (0x0030) plen 2 {0x0001} [hci0] 9.251722 Keys: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 9.251728 Load Identity Resolving Keys (0x0030) plen 0 Status: Success (0x00) @ MGMT Command: Load Connection Par.. (0x0035) plen 2 {0x0001} [hci0] 9.251795 Parameters: 0 @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 9.251802 Load Connection Parameters (0x0035) plen 0 Status: Success (0x00) @ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 9.251868 UUID: 00001200-0000-1000-8000-00805f9b34fb Service class: 0x00 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 9.251879 Add UUID (0x0010) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Set Device ID (0x0028) plen 8 {0x0001} [hci0] 9.251954 Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) @ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 9.251966 Set Device ID (0x0028) plen 0 Status: Success (0x00) @ MGMT Command: Set Device Class (0x000e) plen 2 {0x0001} [hci0] 9.252038 Major class: 0x00 Minor class: 0x00 @ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 9.252045 Set Device Class (0x000e) plen 3 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 @ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci0] 9.252114 Name: BlueZ 5.50 Short name: > HCI Event: Command Complete (0x0e) plen 4 #86 [hci0] 9.255056 Write Scan Enable (0x03|0x001a) ncmd 1 Status: Success (0x00) < HCI Command: Write Local Name (0x03|0x0013) plen 248 #87 [hci0] 9.255105 Name: BlueZ 5.50 > HCI Event: Command Complete (0x0e) plen 4 #88 [hci0] 9.262053 Write Local Name (0x03|0x0013) ncmd 1 Status: Success (0x00) @ MGMT Event: Local Name Changed (0x0008) plen 260 {0x0002} [hci0] 9.262088 Name: BlueZ 5.50 Short name: < HCI Command: Write Extended Inq.. (0x03|0x0052) plen 241 #89 [hci0] 9.262121 FEC: Not required (0x00) Name (complete): BlueZ 5.50 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.3.2 (0x0532) 16-bit Service UUIDs (complete): 2 entries A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 #90 [hci0] 9.267053 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 263 {0x0001} [hci0] 9.267092 Set Local Name (0x000f) plen 260 Status: Success (0x00) Name: BlueZ 5.50 Short name: @ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci2] 9.267301 Name: raspberrypi Short name: < HCI Command: Write Local Name (0x03|0x0013) plen 248 #107 [hci2] 9.267341 Name: raspberrypi > HCI Event: Command Complete (0x0e) plen 4 #108 [hci2] 9.268513 Write Local Name (0x03|0x0013) ncmd 1 Status: Success (0x00) @ MGMT Event: Local Name Changed (0x0008) plen 260 {0x0002} [hci2] 9.268544 Name: raspberrypi Short name: < HCI Command: Write Extended In.. (0x03|0x0052) plen 241 #109 [hci2] 9.268574 FEC: Not required (0x00) Name (co