Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Branch: master
Fetching contributors…

Cannot retrieve contributors at this time

212 lines (175 sloc) 4.843 kB
/*
wiring_serial.c - serial functions.
Part of Arduino - http://www.arduino.cc/
Copyright (c) 2005-2006 David A. Mellis
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General
Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
Boston, MA 02111-1307 USA
$Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
*/
//#include "wiring_private.h"
#include <math.h>
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
// Define constants and variables for buffering incoming serial data. We're
// using a ring buffer (I think), in which rx_buffer_head is the index of the
// location to which to write the next incoming character and rx_buffer_tail
// is the index of the location from which to read.
#ifdef __AVR_ATmega328P__
#define RX_BUFFER_SIZE 256
#else
#define RX_BUFFER_SIZE 64
#endif
unsigned char rx_buffer[RX_BUFFER_SIZE];
int rx_buffer_head = 0;
int rx_buffer_tail = 0;
void beginSerial(long baud)
{
UBRR0H = ((F_CPU / 16 + baud / 2) / baud - 1) >> 8;
UBRR0L = ((F_CPU / 16 + baud / 2) / baud - 1);
/* baud doubler off - Only needed on Uno XXX */
UCSR0A &= ~(1 << U2X0);
// enable rx and tx
UCSR0B |= 1<<RXEN0;
UCSR0B |= 1<<TXEN0;
// enable interrupt on complete reception of a byte
UCSR0B |= 1<<RXCIE0;
// defaults to 8-bit, no parity, 1 stop bit
}
void serialWrite(unsigned char c)
{
while (!(UCSR0A & (1 << UDRE0)))
;
UDR0 = c;
}
int serialAvailable()
{
return (RX_BUFFER_SIZE + rx_buffer_head - rx_buffer_tail) % RX_BUFFER_SIZE;
}
int serialRead()
{
// if the head isn't ahead of the tail, we don't have any characters
if (rx_buffer_head == rx_buffer_tail) {
return -1;
} else {
unsigned char c = rx_buffer[rx_buffer_tail];
rx_buffer_tail = (rx_buffer_tail + 1) % RX_BUFFER_SIZE;
return c;
}
}
void serialFlush()
{
// don't reverse this or there may be problems if the RX interrupt
// occurs after reading the value of rx_buffer_head but before writing
// the value to rx_buffer_tail; the previous value of rx_buffer_head
// may be written to rx_buffer_tail, making it appear as if the buffer
// were full, not empty.
rx_buffer_head = rx_buffer_tail;
}
SIGNAL(USART0_RX_vect)
{
unsigned char c = UDR0;
int i = (rx_buffer_head + 1) % RX_BUFFER_SIZE;
// if we should be storing the received character into the location
// just before the tail (meaning that the head would advance to the
// current location of the tail), we're about to overflow the buffer
// and so we don't write the character or advance the head.
if (i != rx_buffer_tail) {
rx_buffer[rx_buffer_head] = c;
rx_buffer_head = i;
}
}
// void printMode(int mode)
// {
// // do nothing, we only support serial printing, not lcd.
// }
void printByte(unsigned char c)
{
serialWrite(c);
}
// void printNewline()
// {
// printByte('\n');
// }
//
void printString(const char *s)
{
while (*s)
printByte(*s++);
}
// Print a string stored in PGM-memory
void printPgmString(const char *s)
{
char c;
while ((c = pgm_read_byte_near(s++)))
printByte(c);
}
void printIntegerInBase(unsigned long n, unsigned long base)
{
unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars.
unsigned long i = 0;
if (n == 0) {
printByte('0');
return;
}
while (n > 0) {
buf[i++] = n % base;
n /= base;
}
for (; i > 0; i--)
printByte(buf[i - 1] < 10 ?
'0' + buf[i - 1] :
'A' + buf[i - 1] - 10);
}
void printInteger(long n)
{
if (n < 0) {
printByte('-');
n = -n;
}
printIntegerInBase(n, 10);
}
void printFloat(double n)
{
double integer_part, fractional_part;
fractional_part = modf(n, &integer_part);
printInteger(integer_part);
printByte('.');
printInteger(round(fractional_part*1000));
}
// void printHex(unsigned long n)
// {
// printIntegerInBase(n, 16);
// }
//
// void printOctal(unsigned long n)
// {
// printIntegerInBase(n, 8);
// }
//
// void printBinary(unsigned long n)
// {
// printIntegerInBase(n, 2);
// }
/* Including print() adds approximately 1500 bytes to the binary size,
* so we replace it with the smaller and less-confusing printString(),
* printInteger(), etc.
void print(const char *format, ...)
{
char buf[256];
va_list ap;
va_start(ap, format);
vsnprintf(buf, 256, format, ap);
va_end(ap);
printString(buf);
}
*/
Jump to Line
Something went wrong with that request. Please try again.