Printed Parts for the BBOne
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
0001a_Z_Drive_Motor_Plate.stl
0001b_Z_Drive_Frame_Plate.stl
0001c_Z_Drive_Connector_2x.stl
0002_Z_Tensioner_2x.stl
0003_Z_Endstop_Mount.stl
0004_Z_Baseplate_2x.stl
0005_Z_Drive_Connector_Plate_2x.stl
0006_Z_Chain_Retainer_2x.stl
0007_Z_Chain_Mount.stl
0008_lower_bearing_block_a_2x.stl
0009_lower_bearing_block_b_2x.stl
0010_lower_bearing_block_c_2x.stl
0011_lower_bearing_block_spacer_2x.stl
0012_bearing_block_625_4x.stl
0100_X_Carriage_Belt_Fixture.stl
0101_X_Carriage_Chainmount_Spacer.stl
0102_X_Carriage_Chainmount_2x.stl
0103_X_Chainmount.stl
0200_Y_Chainmount_Heatbed.stl
0201_Y_Chainmount_Frame.stl
0202_Y_Belt_Fixture.stl
0300_NEMA17_Spacer_2x.stl
1000_Arduino_Mount.stl
1001_PSU_24V_4x.stl
1002_MPX_Buchse_5.stl
1003_Hook_60mm.stl
1004_Hook_60mm_mirrored.stl
1005_DCDC_Mount.stl
1006_Fan_Mount_Top.stl
1007_Power_Inlet_Adapter.stl
1100_Ikea Roll_Spacer_2x.stl
1101_Rollclip_2x.stl
1102_PFTE_Guide_mount.stl
1103_PFTE_Guide_mount_cap.stl
1104_PFTE_Guide_mount_long.stl
1105_PTFE_tube_endcap.stl
1200_RADDS_Display_Mount.stl
1201_RADDS_Display_Button_High.stl
1202_RADDS_Display_Button_Low.stl
1203_RADDS_Display_Knob.stl
5000_Flex_Extruder_Base_Mount_2x.STL
5001_Flex_Extruder_Top_Mount_2x.stl
5100_Flex_Extruder_plate_1.stl
5101_Flex_Extruder_plate_2.stl
5102_Flex_Extruder_plate_3.stl
5103_extruder_fan_shield.stl
5104_Flex_Extruder_Dual_Fan_Mount.STL
6000_Dell_Venue_Mount_2x.stl
6001_Dell_Venue_Mount_Angle_2x.stl
6002_lamp_IKEA_ JANSJÖ_mount.stl
6003_8mm_Mount.stl
6004_Mechanical_Endstop.stl
README.md

README.md

BBOne_PrintedParts

These are the Printed Parts for the BBOne

for more information see http://bbone.info

Parts 0 - 1999 Are basic printer parts

5000 - 5999 are extruder parts and different ones might be needed depenting on the Extruder/Hotend you're going to use

6000 and up are optional parts