From 5113513cb2efd62c01a4fab4cb28e0a8d9905005 Mon Sep 17 00:00:00 2001 From: Erik van der Zalm Date: Wed, 8 Feb 2012 18:28:54 +0100 Subject: [PATCH] RC 1 --- Marlin/Configuration_adv.h | 17 +++++++++++++++ Marlin/Marlin.pde | 42 ++++++++++++-------------------------- README.md | 6 +++++- 3 files changed, 35 insertions(+), 30 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index a94dba79d6b4..1bdbd1ac2cba 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -204,5 +204,22 @@ const int dropsegments=5; //everything with less than this number of steps will #if TEMP_SENSOR_0 == -2 #define HEATER_0_USES_MAX6675 #endif +#if TEMP_SENSOR_0 == 0 + #undef HEATER_0_MINTEMP + #undef HEATER_0_MAXTEMP +#endif +#if TEMP_SENSOR_1 == 0 + #undef HEATER_1_MINTEMP + #undef HEATER_1_MAXTEMP +#endif +#if TEMP_SENSOR_2 == 0 + #undef HEATER_2_MINTEMP + #undef HEATER_2_MAXTEMP +#endif +#if TEMP_SENSOR_BED == 0 + #undef BED_MINTEMP + #undef BED_MAXTEMP +#endif + #endif //__CONFIGURATION_ADV_H diff --git a/Marlin/Marlin.pde b/Marlin/Marlin.pde index e1decfd3f048..57ededa2ef1c 100644 --- a/Marlin/Marlin.pde +++ b/Marlin/Marlin.pde @@ -27,8 +27,6 @@ #include "Marlin.h" - - #include "ultralcd.h" #include "planner.h" #include "stepper.h" @@ -38,12 +36,7 @@ #include "watchdog.h" #include "EEPROMwrite.h" - - -#define VERSION_STRING "1.0.0 Beta 1" - - - +#define VERSION_STRING "1.0.0 RC1" // look here for descriptions of gcodes: http://linuxcnc.org/handbook/gcode/g-code.html // http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes @@ -147,15 +140,11 @@ static bool home_all_axis = true; static float feedrate = 1500.0, next_feedrate, saved_feedrate; static long gcode_N, gcode_LastN; - - static bool relative_mode = false; //Determines Absolute or Relative Coordinates static bool relative_mode_e = false; //Determines Absolute or Relative E Codes while in Absolute Coordinates mode. E is always relative in Relative Coordinates mode. static uint8_t fanpwm=0; - - static char cmdbuffer[BUFSIZE][MAX_CMD_SIZE]; static bool fromsd[BUFSIZE]; static int bufindr = 0; @@ -224,6 +213,7 @@ void enquecommand(const char *cmd) buflen += 1; } } + void setup_photpin() { #ifdef PHOTOGRAPH_PIN @@ -254,12 +244,6 @@ void suicide() #endif } -long millis_diff(unsigned long starttime) { - unsigned long difftime = millis() - starttime; - if (difftime > 0x8000) difftime += 0x8000; - return difftime; -} - void setup() { setup_powerhold(); @@ -332,7 +316,6 @@ void loop() LCD_STATUS; } - void get_command() { while( MSerial.available() > 0 && buflen < BUFSIZE) { @@ -556,9 +539,9 @@ void process_commands() if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait st_synchronize(); -// codenum += millis(); // keep track of when we started waiting + codenum += millis(); // keep track of when we started waiting previous_millis_cmd = millis(); - while(millis_diff(previous_millis_cmd) < codenum ){ + while(millis() < codenum ){ manage_heater(); } break; @@ -795,7 +778,7 @@ void process_commands() #if (TEMP_0_PIN > -1) SERIAL_PROTOCOLPGM("ok T:"); SERIAL_PROTOCOL(degHotend(tmp_extruder)); - #if TEMP_BED_PIN > -1 + #if TEMP_BED_PIN > -1 SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOL(degBed()); #endif //TEMP_BED_PIN @@ -849,11 +832,11 @@ void process_commands() /* continue to loop until we have reached the target temp _and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */ while((residencyStart == -1) || - (residencyStart > -1 && (millis_diff(residencyStart) < TEMP_RESIDENCY_TIME*1000) )) { + (residencyStart > -1 && (millis() - residencyStart) < TEMP_RESIDENCY_TIME*1000) ) { #else while ( target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder)&&(CooldownNoWait==false)) ) { #endif //TEMP_RESIDENCY_TIME - if(millis_diff(codenum) > 1000 ) + if((millis() - codenum) > 1000 ) { //Print Temp Reading and remaining time every 1 second while heating up/cooling down SERIAL_PROTOCOLPGM("T:"); SERIAL_PROTOCOL( degHotend(tmp_extruder) ); @@ -863,7 +846,7 @@ void process_commands() SERIAL_PROTOCOLPGM(" W:"); if(residencyStart > -1) { - codenum = TEMP_RESIDENCY_TIME - (millis_diff(residencyStart) / 1000); + codenum = TEMP_RESIDENCY_TIME - ((millis() - residencyStart) / 1000); SERIAL_PROTOCOLLN( codenum ); } else @@ -901,7 +884,7 @@ void process_commands() codenum = millis(); while(isHeatingBed()) { - if( millis_diff(codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. + if(( millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. { float tt=degHotend(active_extruder); SERIAL_PROTOCOLPGM("T:"); @@ -971,6 +954,7 @@ void process_commands() bool all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))|| (code_seen(axis_codes[3]))); if(all_axis) { + st_synchronize(); disable_e0(); disable_e1(); disable_e2(); @@ -1299,11 +1283,11 @@ void prepare_arc_move(char isclockwise) { void manage_inactivity(byte debug) { - if( millis_diff(previous_millis_cmd) > max_inactive_time ) + if( (millis() - previous_millis_cmd) > max_inactive_time ) if(max_inactive_time) kill(); if(stepper_inactive_time) - if( millis_diff(last_stepperdisabled_time) > stepper_inactive_time ) + if( (millis() - last_stepperdisabled_time) > stepper_inactive_time ) { if(previous_millis_cmd>last_stepperdisabled_time) last_stepperdisabled_time=previous_millis_cmd; @@ -1315,7 +1299,7 @@ void manage_inactivity(byte debug) } } #ifdef EXTRUDER_RUNOUT_PREVENT - if( millis_diff(previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 ) + if( (millis() - previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 ) if(degHotend(active_extruder)>EXTRUDER_RUNOUT_MINTEMP) { bool oldstatus=READ(E0_ENABLE_PIN); diff --git a/README.md b/README.md index 0beb13fe583b..6f04764c94e6 100644 --- a/README.md +++ b/README.md @@ -1,6 +1,10 @@ WARNING: -------- -THIS IS THE BETA 1 FOR MARLIN 1.0.0 +THIS IS RELEASE CANDIDATE 1 FOR MARLIN 1.0.0 + +The configuration is now split in two files +Configuration.h for the normal settings +Configuration_adv.h for the advanced settings Quick Information ===================