Permalink
Browse files

assets dir should be out of code repository

  • Loading branch information...
1 parent c505496 commit 5f173ccdc36c67f55e2cccbacd7914adc6c50225 @tokuhirom committed May 26, 2011
Showing 2,616 changed files with 0 additions and 765,097 deletions.
View

Large diffs are not rendered by default.

Oops, something went wrong.
Submodule module-pod-jp deleted from 70668b
@@ -1,8 +0,0 @@
-D/CVSROOT////
-D/docs////
-D/memo////
-D/meta////
-D/utils////
-D/web////
-D/work////
-D/helper-data////
@@ -1,2 +0,0 @@
-A D/tools////
-R D/tools////
@@ -1 +0,0 @@
-.
@@ -1 +0,0 @@
-:pserver:anonymous@cvs.sourceforge.jp:/cvsroot/perldocjp
@@ -1,12 +0,0 @@
-/checkoutlist/1.1/Fri Mar 25 02:16:47 2011//
-/commitinfo/1.1/Fri Mar 25 02:16:47 2011//
-/config/1.3/Fri Mar 25 02:16:47 2011//
-/cvswrappers/1.1/Fri Mar 25 02:16:47 2011//
-/editinfo/1.1/Fri Mar 25 02:16:47 2011//
-/loginfo/1.6/Fri Mar 25 02:16:47 2011//
-/modules/1.4/Fri Mar 25 02:16:47 2011//
-/notify/1.1/Fri Mar 25 02:16:47 2011//
-/rcsinfo/1.1/Fri Mar 25 02:16:47 2011//
-/taginfo/1.1/Fri Mar 25 02:16:47 2011//
-/verifymsg/1.1/Fri Mar 25 02:16:47 2011//
-D
@@ -1 +0,0 @@
-CVSROOT
@@ -1 +0,0 @@
-:pserver:anonymous@cvs.sourceforge.jp:/cvsroot/perldocjp
@@ -1,13 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-# [<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'
@@ -1,15 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list
-# of files to check. A non-zero exit of the filter program will
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT. For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
@@ -1,17 +0,0 @@
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOFEWGCMAR
-
-UseNewInfoFmtStrings=yes
-LockDir=/var/lock/cvs/perldocjp
@@ -1,23 +0,0 @@
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-# wildcard [option value][option value]...
-#
-# where option is one of
-# -f from cvs filter value: path to filter
-# -t to cvs filter value: path to filter
-# -m update methodology value: MERGE or COPY
-# -k expansion mode value: b, o, kkv, &c
-#
-# and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'
@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information. It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure. Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-# Making sure that the entered bug-id number is correct.
-# Validating that the code that was reviewed is indeed the code being
-# checked in (using the bug-id number or a seperate review
-# number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported. There can be only one entry that matches a given
-# repository.
@@ -1,28 +0,0 @@
-# The "loginfo" file controls where "cvs commit" log information
-# is sent. The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT. If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter. The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators. The format
-# characters are:
-#
-# s = file name
-# V = old version number (pre-checkin)
-# v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
-
-DEFAULT /usr/local/bin/cvs-commitmail -d -m perldocjp-cvs@lists.sourceforge.jp "%p %{sVv}"
@@ -1,28 +0,0 @@
-# Three different line formats are valid:
-# key -a aliases...
-# key [options] directory
-# key [options] directory files...
-#
-# Where "options" are composed of:
-# -i prog Run "prog" on "cvs commit" from top-level of module.
-# -o prog Run "prog" on "cvs checkout" of module.
-# -e prog Run "prog" on "cvs export" of module.
-# -t prog Run "prog" on "cvs rtag" of module.
-# -u prog Run "prog" on "cvs update" of module.
-# -d dir Place module in directory "dir" instead of module name.
-# -l Top-level directory only -- do not recurse.
-#
-# NOTE: If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias. An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module. This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.
-
-all -a docs memo meta tools work
@@ -1,12 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent. The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT. If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"
@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT. For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4-> file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT. For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
@@ -1,21 +0,0 @@
-# The "verifymsg" file is used to allow verification of logging
-# information. It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure. Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-# Making sure that the entered bug-id number is correct.
-# Validating that the code that was reviewed is indeed the code being
-# checked in (using the bug-id number or a seperate review
-# number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported. There can be only one entry that matches a given
-# repository.
@@ -1,2 +0,0 @@
-D/modules////
-D/perl////
@@ -1 +0,0 @@
-docs
@@ -1 +0,0 @@
-:pserver:anonymous@cvs.sourceforge.jp:/cvsroot/perldocjp
@@ -1,76 +0,0 @@
-
-=encoding euc-jp
-
-=head1 ̾�
-
-Acme::Bleach - �ץ�����I<�����>���쥤�ˤ��ޤ�
-
-=head1 ����
-
- use Acme::Bleach;
-
- print "Hello world";
-
-=head1 ����
-
-�ǽ��C<use Acme::Bleach>�θ��ǥץ�����¹Ԥ����Ȥ����⥸�塼���
-���ʤ��Υ������ե����뤫�鸫�ɤ��ΰ��������ǽ��ʸ�����ƽ��ޤ���
-�����ɤϤ���򤹤�������Ʊ���褦��ư���ޤ�������������ϰʲ��Τ褦��
-�ʤ�ޤ�:
-
- use Acme::Bleach;
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-=head1 ���Ǿ���
-
-=over 4
-
-=item C<Can't bleach '%s'>
-
-Acme::Bleach���ѹ����륽�����ե�����˥����������뤳�Ȥ��Ǥ��ޤ���Ǥ�����
-
-=item C<Can't rebleach '%s'>
-
-Acme::Bleach�ϼ¹Ԥ��륽�����ե�����˥��������Ǥ��ޤ���Ǥ�����
-
-=back
-
-=head1 ���ͻ���
-
-http://www.templetons.com/tech/proletext.html
-
-=head1 ���(=AUTHOR)
-
-Damian Conway (as if you couldn't guess)
-
-=head1 ��(=COPYRIGHT)
-
- Copyright (c) 2001, Damian Conway. All Rights Reserved.
- This module is free software. It may be used, redistributed
-and/or modified under the terms of the Perl Artistic License
- (see http://www.perl.com/perl/misc/Artistic.html)
-
-=head1 �����
-
-��繧ŵ(GCD00051@nifty.ne.jp)
@@ -1,4 +0,0 @@
-/Bleach.pod/1.3/Fri Mar 25 02:16:47 2011//
-/DWIM.pod/1.3/Fri Mar 25 02:16:47 2011//
-/Morse.pod/1.3/Fri Mar 25 02:16:47 2011//
-D
@@ -1 +0,0 @@
-docs/modules/Acme-Bleach-1.12
@@ -1 +0,0 @@
-:pserver:anonymous@cvs.sourceforge.jp:/cvsroot/perldocjp
Oops, something went wrong.

0 comments on commit 5f173cc

Please sign in to comment.