This project is a cloud-based interface to a home automation system based on the Raspberry Pi. It is a proof-of-concept written for a presentaiton at the Boston Google Developers meetup. The project demonstrates a number of interesting technologies including XMPP, AppEngine's Channel API, and the Raspberry Pi.
Conceptual block diagram:
The components of the project are outlined below:
It's possible that anyone can use the live app at http://remoht.us/ - since you login with your own Google credentials and use those same credentials for your sensor clusters (the Raspberry Pi(s)) there's no way for a user to view someone else's sensor data.
This is a Google AppEngine app that serves as the web UI. The benefit to being on AppEngine is that it is universally accessible without having to deal with connecting through a NAT firewall to the HAN-side device.
Install this by deploying it to AppEngine.
Note you should run
minify.sh prior to uploading to AppEngine as the deployed
version will look for minified CSS and JS assets.
This is the client code that runs locally on the Raspberry Pi and performs local data collection. The Pi uses SleekXMPP to maintain a connection with AppEngine's XMPP service. This allows for bidirectional communication (server-to-client and client-to-server) without any sort of ugly HTTP polling.
The Pi also interfaces via serial to an Arduino.
While the Pi has some GPIOs, it is not ideally suited for low-level hardware interaction and cannot do any analog I/O. Thus, that work is left up to a separate microcontroller, in our case an Arduino.
Your distro should have python installed already; if so you can use Pip to install the dependencies.
# get Pip installed: curl -O http://python-distribute.org/distribute_setup.py python distribute_setup.py easy_install pip # install dependencies pip install < requirements.txt
Then run by calling
python remoht.py # use --help to see command line options
This code runs on an Arduino an collects data from a number of hardware peripherals. In the first incarnation, this includes:
- a Photocell to measure light levels,
- a LM36 temperature sensor
- a PIR motion sensor
- relays to control lights, small electronics, etc.
And this could easily be expanded to include other hardware peripherals as well. The Arduino acts as a "bus" and uses a simple serial protocol to transmit the low-level hardware readings to the Raspberry Pi. The project source contains a schematic diagram that can be viewed in Fritzing.
There are a couple options here. If you have an Arduino with an on-board USB port,
simply connect the Arduino to your Raspberry Pi's USB powered hub. The Arduino should
then enumerate as
/dev/ttyUSB0. You would then run the Raspberry Pi client as follows:
python remoht.py --tty=/dev/ttyUSB0 # plus additional parameters
If you are using an Arduino Pro Mini or any other chip that does not have built-in USB
interface or FTDI usb-to-serial converter, you can connect the serial and power pins
directly to the Pi's GPIO header which
is exposed as
/dev/ttyAMA0. In that case, note that the TX pin on the Ardunio
connects to the RX (pin 15) on the Raspberry Pi and vice versa. The 5v or 3v3
should also be able to power the Arduino and sensors, but probably not the relays.
The system assumes you will use the same GMail/ Google Talk account for both your web login and the XMPP credentials on the Raspberry Pi. This makes it a bit easier to auto-detect clients without requiring you to type in the JID that your Raspberry Pi is using. If you're not comfortable re-using your Gmail password in the hardware, you can use AuthSub from your Google account to issue passwords for specific uses and revoke them later if necessary.
- add interrupt-driven events to the Pi rather than polling
- Local web UI on the Raspberry Pi
- Local logging on the Raspberry Pi, push readings to the cloud on change-of-value
- Support multiple Arduino-based sensors (e.g. communicating via xbee)
Copyright 2013 EnerNOC Inc
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.