Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

335 lines (299 sloc) 11.949 kb
#!perl -w
use strict;
use Test::More tests => 244;
use Imager ':all';
use Imager::Test qw(is_color3 is_image);
use constant PI => 3.14159265358979;
-d "testout" or mkdir "testout";
init_log("testout/t21draw.log",1);
my $redobj = NC(255, 0, 0);
my $red = 'FF0000';
my $greenobj = NC(0, 255, 0);
my $green = [ 0, 255, 0 ];
my $blueobj = NC(0, 0, 255);
my $blue = { hue=>240, saturation=>1, value=>1 };
my $white = '#FFFFFF';
{
my $img = Imager->new(xsize=>100, ysize=>500);
ok($img->box(color=>$blueobj, xmin=>10, ymin=>10, xmax=>48, ymax=>18),
"box with color obj");
ok($img->box(color=>$blue, xmin=>10, ymin=>20, xmax=>48, ymax=>28),
"box with color");
ok($img->box(color=>$redobj, xmin=>10, ymin=>30, xmax=>28, ymax=>48, filled=>1),
"filled box with color obj");
ok($img->box(color=>$red, xmin=>30, ymin=>30, xmax=>48, ymax=>48, filled=>1),
"filled box with color");
ok($img->arc('x'=>75, 'y'=>25, r=>24, color=>$redobj),
"filled arc with colorobj");
ok($img->arc('x'=>75, 'y'=>25, r=>20, color=>$green),
"filled arc with colorobj");
ok($img->arc('x'=>75, 'y'=>25, r=>18, color=>$white, d1=>325, d2=>225),
"filled arc with color");
ok($img->arc('x'=>75, 'y'=>25, r=>18, color=>$blue, d1=>225, d2=>325),
"filled arc with color");
ok($img->arc('x'=>75, 'y'=>25, r=>15, color=>$green, aa=>1),
"filled arc with color");
ok($img->line(color=>$blueobj, x1=>5, y1=>55, x2=>35, y2=>95),
"line with colorobj");
# FIXME - neither the start nor end-point is set for a non-aa line
my $c = Imager::i_get_pixel($img->{IMG}, 5, 55);
ok(color_cmp($c, $blueobj) == 0, "# TODO start point not set");
ok($img->line(color=>$red, x1=>10, y1=>55, x2=>40, y2=>95, aa=>1),
"aa line with color");
ok($img->line(color=>$green, x1=>15, y1=>55, x2=>45, y2=>95, antialias=>1),
"antialias line with color");
ok($img->polyline(points=>[ [ 55, 55 ], [ 90, 60 ], [ 95, 95] ],
color=>$redobj),
"polyline points with color obj");
ok($img->polyline('x'=>[ 55, 85, 90 ], 'y'=>[60, 65, 95], color=>$green, aa=>1),
"polyline xy with color aa");
ok($img->polyline('x'=>[ 55, 80, 85 ], 'y'=>[65, 70, 95], color=>$green,
antialias=>1),
"polyline xy with color antialias");
ok($img->setpixel('x'=>[35, 37, 39], 'y'=>[55, 57, 59], color=>$red),
"set array of pixels");
ok($img->setpixel('x'=>39, 'y'=>55, color=>$green),
"set single pixel");
use Imager::Color::Float;
my $flred = Imager::Color::Float->new(1, 0, 0, 0);
my $flgreen = Imager::Color::Float->new(0, 1, 0, 0);
ok($img->setpixel('x'=>[41, 43, 45], 'y'=>[55, 57, 59], color=>$flred),
"set array of float pixels");
ok($img->setpixel('x'=>45, 'y'=>55, color=>$flgreen),
"set single float pixel");
my @gp = $img->getpixel('x'=>[41, 43, 45], 'y'=>[55, 57, 59]);
ok(grep($_->isa('Imager::Color'), @gp) == 3, "check getpixel result type");
ok(grep(color_cmp($_, NC(255, 0, 0)) == 0, @gp) == 3,
"check getpixel result colors");
my $gp = $img->getpixel('x'=>45, 'y'=>55);
ok($gp->isa('Imager::Color'), "check scalar getpixel type");
ok(color_cmp($gp, NC(0, 255, 0)) == 0, "check scalar getpixel color");
@gp = $img->getpixel('x'=>[35, 37, 39], 'y'=>[55, 57, 59], type=>'float');
ok(grep($_->isa('Imager::Color::Float'), @gp) == 3,
"check getpixel float result type");
ok(grep(color_cmp($_, $flred) == 0, @gp) == 3,
"check getpixel float result type");
$gp = $img->getpixel('x'=>39, 'y'=>55, type=>'float');
ok($gp->isa('Imager::Color::Float'), "check scalar float getpixel type");
ok(color_cmp($gp, $flgreen) == 0, "check scalar float getpixel color");
# more complete arc tests
ok($img->arc(x=>25, 'y'=>125, r=>20, d1=>315, d2=>45, color=>$greenobj),
"color arc through angle 0");
# use diff combine here to make sure double writing is noticable
ok($img->arc(x=>75, 'y'=>125, r=>20, d1=>315, d2=>45,
fill => { solid=>$blueobj, combine => 'diff' }),
"fill arc through angle 0");
ok($img->arc(x=>25, 'y'=>175, r=>20, d1=>315, d2=>225, color=>$redobj),
"concave color arc");
angle_marker($img, 25, 175, 23, 315, 225);
ok($img->arc(x=>75, 'y'=>175, r=>20, d1=>315, d2=>225,
fill => { solid=>$greenobj, combine=>'diff' }),
"concave fill arc");
angle_marker($img, 75, 175, 23, 315, 225);
ok($img->arc(x=>25, y=>225, r=>20, d1=>135, d2=>45, color=>$redobj),
"another concave color arc");
angle_marker($img, 25, 225, 23, 45, 135);
ok($img->arc(x=>75, y=>225, r=>20, d1=>135, d2=>45,
fill => { solid=>$blueobj, combine=>'diff' }),
"another concave fillarc");
angle_marker($img, 75, 225, 23, 45, 135);
ok($img->arc(x=>25, y=>275, r=>20, d1=>135, d2=>45, color=>$redobj, aa=>1),
"concave color arc aa");
ok($img->arc(x=>75, y=>275, r=>20, d1=>135, d2=>45,
fill => { solid=>$blueobj, combine=>'diff' }, aa=>1),
"concave fill arc aa");
ok($img->circle(x=>25, y=>325, r=>20, color=>$redobj),
"color circle no aa");
ok($img->circle(x=>75, y=>325, r=>20, color=>$redobj, aa=>1),
"color circle aa");
ok($img->circle(x=>25, 'y'=>375, r=>20,
fill => { hatch=>'stipple', fg=>$blueobj, bg=>$redobj }),
"fill circle no aa");
ok($img->circle(x=>75, 'y'=>375, r=>20, aa=>1,
fill => { hatch=>'stipple', fg=>$blueobj, bg=>$redobj }),
"fill circle aa");
ok($img->arc(x=>50, y=>450, r=>45, d1=>135, d2=>45,
fill => { solid=>$blueobj, combine=>'diff' }),
"another concave fillarc");
angle_marker($img, 50, 450, 47, 45, 135);
ok($img->write(file=>'testout/t21draw.ppm'),
"saving output");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
ok($im->arc(x => 200, y => 202, r => 10, filled => 0),
"draw circle outline");
is_color3($im->getpixel(x => 200, y => 202), 0, 0, 0,
"check center not filled");
ok($im->arc(x => 198, y => 200, r => 13, filled => 0, color => "#f88"),
"draw circle outline");
is_color3($im->getpixel(x => 198, y => 200), 0, 0, 0,
"check center not filled");
ok($im->arc(x => 200, y => 200, r => 24, filled => 0, color => "#0ff"),
"draw circle outline");
my $r = 40;
while ($r < 180) {
ok($im->arc(x => 200, y => 200, r => $r, filled => 0, color => "#ff0"),
"draw circle outline r $r");
$r += 15;
}
ok($im->write(file => "testout/t21circout.ppm"),
"save arc outline");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
{
my $lc = Imager::Color->new(32, 32, 32);
my $an = 0;
while ($an < 360) {
my $an_r = $an * PI / 180;
my $ca = cos($an_r);
my $sa = sin($an_r);
$im->line(aa => 1, color => $lc,
x1 => 198 + 5 * $ca, y1 => 202 + 5 * $sa,
x2 => 198 + 190 * $ca, y2 => 202 + 190 * $sa);
$an += 5;
}
}
my $d1 = 0;
my $r = 20;
while ($d1 < 350) {
ok($im->arc(x => 198, y => 202, r => $r, d1 => $d1, d2 => $d1+300, filled => 0),
"draw arc outline r$r d1$d1 len 300");
ok($im->arc(x => 198, y => 202, r => $r+3, d1 => $d1, d2 => $d1+40, filled => 0, color => '#FFFF00'),
"draw arc outline r$r d1$d1 len 40");
$d1 += 15;
$r += 6;
}
is_color3($im->getpixel(x => 198, y => 202), 0, 0, 0,
"check center not filled");
ok($im->write(file => "testout/t21arcout.ppm"),
"save arc outline");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
ok($im->arc(x => 197, y => 201, r => 10, filled => 0, aa => 1, color => 'white'),
"draw circle outline");
is_color3($im->getpixel(x => 197, y => 201), 0, 0, 0,
"check center not filled");
ok($im->arc(x => 197, y => 205, r => 13, filled => 0, color => "#f88", aa => 1),
"draw circle outline");
is_color3($im->getpixel(x => 197, y => 205), 0, 0, 0,
"check center not filled");
ok($im->arc(x => 190, y => 215, r => 24, filled => 0, color => [0,0, 255, 128], aa => 1),
"draw circle outline");
my $r = 40;
while ($r < 190) {
ok($im->arc(x => 197, y => 201, r => $r, filled => 0, aa => 1, color => '#ff0'), "draw aa circle rad $r");
$r += 7;
}
ok($im->write(file => "testout/t21aacircout.ppm"),
"save arc outline");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
{
my $lc = Imager::Color->new(32, 32, 32);
my $an = 0;
while ($an < 360) {
my $an_r = $an * PI / 180;
my $ca = cos($an_r);
my $sa = sin($an_r);
$im->line(aa => 1, color => $lc,
x1 => 198 + 5 * $ca, y1 => 202 + 5 * $sa,
x2 => 198 + 190 * $ca, y2 => 202 + 190 * $sa);
$an += 5;
}
}
my $d1 = 0;
my $r = 20;
while ($d1 < 350) {
ok($im->arc(x => 198, y => 202, r => $r, d1 => $d1, d2 => $d1+300, filled => 0, aa => 1),
"draw aa arc outline r$r d1$d1 len 300");
ok($im->arc(x => 198, y => 202, r => $r+3, d1 => $d1, d2 => $d1+40, filled => 0, color => '#FFFF00', aa => 1),
"draw aa arc outline r$r d1$d1 len 40");
$d1 += 15;
$r += 6;
}
is_color3($im->getpixel(x => 198, y => 202), 0, 0, 0,
"check center not filled");
ok($im->write(file => "testout/t21aaarcout.ppm"),
"save arc outline");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
my $an = 0;
my $step = 15;
while ($an <= 360-$step) {
my $cx = int(200 + 20 * cos(($an+$step/2) * PI / 180));
my $cy = int(200 + 20 * sin(($an+$step/2) * PI / 180));
ok($im->arc(x => $cx, y => $cy, aa => 1, color => "#fff",
d1 => $an, d2 => $an+$step, filled => 0, r => 170),
"angle starting from $an");
ok($im->arc(x => $cx+0.5, y => $cy+0.5, aa => 1, color => "#ff0",
d1 => $an, d2 => $an+$step, r => 168),
"filled angle starting from $an");
$an += $step;
}
ok($im->write(file => "testout/t21aaarcs.ppm"),
"save arc outline");
}
{
# we document that drawing from d1 to d2 where d2 > d1 will draw an
# arc going through 360 degrees, test that
my $im = Imager->new(xsize => 200, ysize => 200);
ok($im->arc(x => 100, y => 100, aa => 0, filled => 0, color => '#fff',
d1 => 270, d2 => 90, r => 90), "draw non-aa arc through 0");
ok($im->arc(x => 100, y => 100, aa => 1, filled => 0, color => '#fff',
d1 => 270, d2 => 90, r => 80), "draw aa arc through 0");
ok($im->write(file => "testout/t21arc0.ppm"),
"save arc through 0");
}
{
# test drawing color defaults
{
my $im = Imager->new(xsize => 10, ysize => 10);
ok($im->box(), "default outline the image"); # should outline the image
is_color3($im->getpixel(x => 0, y => 0), 255, 255, 255,
"check outline default color TL");
is_color3($im->getpixel(x => 9, y => 5), 255, 255, 255,
"check outline default color MR");
}
{
my $im = Imager->new(xsize => 10, ysize => 10);
ok($im->box(filled => 1), "default fill the image"); # should fill the image
is_color3($im->getpixel(x => 0, y => 0), 255, 255, 255,
"check fill default color TL");
is_color3($im->getpixel(x => 5, y => 5), 255, 255, 255,
"check fill default color MM");
}
}
malloc_state();
unless ($ENV{IMAGER_KEEP_FILES}) {
unlink "testout/t21draw.ppm";
unlink "testout/t21circout.ppm";
unlink "testout/t21aacircout.ppm";
unlink "testout/t21arcout.ppm";
unlink "testout/t21aaarcout.ppm";
unlink "testout/t21aaarcs.ppm";
unlink "testout/t21arc0.ppm";
}
sub color_cmp {
my ($l, $r) = @_;
my @l = $l->rgba;
my @r = $r->rgba;
# print "# (",join(",", @l[0..2]),") <=> (",join(",", @r[0..2]),")\n";
return $l[0] <=> $r[0]
|| $l[1] <=> $r[1]
|| $l[2] <=> $r[2];
}
sub angle_marker {
my ($img, $x, $y, $radius, @angles) = @_;
for my $angle (@angles) {
my $x1 = int($x + $radius * cos($angle * PI / 180) + 0.5);
my $y1 = int($y + $radius * sin($angle * PI / 180) + 0.5);
my $x2 = int($x + (5+$radius) * cos($angle * PI / 180) + 0.5);
my $y2 = int($y + (5+$radius) * sin($angle * PI / 180) + 0.5);
$img->line(x1=>$x1, y1=>$y1, x2=>$x2, y2=>$y2, color=>'#FFF');
}
}
Jump to Line
Something went wrong with that request. Please try again.