Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

335 lines (299 sloc) 11.949 kb
#!perl -w
use strict;
use Test::More tests => 244;
use Imager ':all';
use Imager::Test qw(is_color3 is_image);
use constant PI => 3.14159265358979;
-d "testout" or mkdir "testout";
init_log("testout/t21draw.log",1);
my $redobj = NC(255, 0, 0);
my $red = 'FF0000';
my $greenobj = NC(0, 255, 0);
my $green = [ 0, 255, 0 ];
my $blueobj = NC(0, 0, 255);
my $blue = { hue=>240, saturation=>1, value=>1 };
my $white = '#FFFFFF';
{
my $img = Imager->new(xsize=>100, ysize=>500);
ok($img->box(color=>$blueobj, xmin=>10, ymin=>10, xmax=>48, ymax=>18),
"box with color obj");
ok($img->box(color=>$blue, xmin=>10, ymin=>20, xmax=>48, ymax=>28),
"box with color");
ok($img->box(color=>$redobj, xmin=>10, ymin=>30, xmax=>28, ymax=>48, filled=>1),
"filled box with color obj");
ok($img->box(color=>$red, xmin=>30, ymin=>30, xmax=>48, ymax=>48, filled=>1),
"filled box with color");
ok($img->arc('x'=>75, 'y'=>25, r=>24, color=>$redobj),
"filled arc with colorobj");
ok($img->arc('x'=>75, 'y'=>25, r=>20, color=>$green),
"filled arc with colorobj");
ok($img->arc('x'=>75, 'y'=>25, r=>18, color=>$white, d1=>325, d2=>225),
"filled arc with color");
ok($img->arc('x'=>75, 'y'=>25, r=>18, color=>$blue, d1=>225, d2=>325),
"filled arc with color");
ok($img->arc('x'=>75, 'y'=>25, r=>15, color=>$green, aa=>1),
"filled arc with color");
ok($img->line(color=>$blueobj, x1=>5, y1=>55, x2=>35, y2=>95),
"line with colorobj");
# FIXME - neither the start nor end-point is set for a non-aa line
my $c = Imager::i_get_pixel($img->{IMG}, 5, 55);
ok(color_cmp($c, $blueobj) == 0, "# TODO start point not set");
ok($img->line(color=>$red, x1=>10, y1=>55, x2=>40, y2=>95, aa=>1),
"aa line with color");
ok($img->line(color=>$green, x1=>15, y1=>55, x2=>45, y2=>95, antialias=>1),
"antialias line with color");
ok($img->polyline(points=>[ [ 55, 55 ], [ 90, 60 ], [ 95, 95] ],
color=>$redobj),
"polyline points with color obj");
ok($img->polyline('x'=>[ 55, 85, 90 ], 'y'=>[60, 65, 95], color=>$green, aa=>1),
"polyline xy with color aa");
ok($img->polyline('x'=>[ 55, 80, 85 ], 'y'=>[65, 70, 95], color=>$green,
antialias=>1),
"polyline xy with color antialias");
ok($img->setpixel('x'=>[35, 37, 39], 'y'=>[55, 57, 59], color=>$red),
"set array of pixels");
ok($img->setpixel('x'=>39, 'y'=>55, color=>$green),
"set single pixel");
use Imager::Color::Float;
my $flred = Imager::Color::Float->new(1, 0, 0, 0);
my $flgreen = Imager::Color::Float->new(0, 1, 0, 0);
ok($img->setpixel('x'=>[41, 43, 45], 'y'=>[55, 57, 59], color=>$flred),
"set array of float pixels");
ok($img->setpixel('x'=>45, 'y'=>55, color=>$flgreen),
"set single float pixel");
my @gp = $img->getpixel('x'=>[41, 43, 45], 'y'=>[55, 57, 59]);
ok(grep($_->isa('Imager::Color'), @gp) == 3, "check getpixel result type");
ok(grep(color_cmp($_, NC(255, 0, 0)) == 0, @gp) == 3,
"check getpixel result colors");
my $gp = $img->getpixel('x'=>45, 'y'=>55);
ok($gp->isa('Imager::Color'), "check scalar getpixel type");
ok(color_cmp($gp, NC(0, 255, 0)) == 0, "check scalar getpixel color");
@gp = $img->getpixel('x'=>[35, 37, 39], 'y'=>[55, 57, 59], type=>'float');
ok(grep($_->isa('Imager::Color::Float'), @gp) == 3,
"check getpixel float result type");
ok(grep(color_cmp($_, $flred) == 0, @gp) == 3,
"check getpixel float result type");
$gp = $img->getpixel('x'=>39, 'y'=>55, type=>'float');
ok($gp->isa('Imager::Color::Float'), "check scalar float getpixel type");
ok(color_cmp($gp, $flgreen) == 0, "check scalar float getpixel color");
# more complete arc tests
ok($img->arc(x=>25, 'y'=>125, r=>20, d1=>315, d2=>45, color=>$greenobj),
"color arc through angle 0");
# use diff combine here to make sure double writing is noticable
ok($img->arc(x=>75, 'y'=>125, r=>20, d1=>315, d2=>45,
fill => { solid=>$blueobj, combine => 'diff' }),
"fill arc through angle 0");
ok($img->arc(x=>25, 'y'=>175, r=>20, d1=>315, d2=>225, color=>$redobj),
"concave color arc");
angle_marker($img, 25, 175, 23, 315, 225);
ok($img->arc(x=>75, 'y'=>175, r=>20, d1=>315, d2=>225,
fill => { solid=>$greenobj, combine=>'diff' }),
"concave fill arc");
angle_marker($img, 75, 175, 23, 315, 225);
ok($img->arc(x=>25, y=>225, r=>20, d1=>135, d2=>45, color=>$redobj),
"another concave color arc");
angle_marker($img, 25, 225, 23, 45, 135);
ok($img->arc(x=>75, y=>225, r=>20, d1=>135, d2=>45,
fill => { solid=>$blueobj, combine=>'diff' }),
"another concave fillarc");
angle_marker($img, 75, 225, 23, 45, 135);
ok($img->arc(x=>25, y=>275, r=>20, d1=>135, d2=>45, color=>$redobj, aa=>1),
"concave color arc aa");
ok($img->arc(x=>75, y=>275, r=>20, d1=>135, d2=>45,
fill => { solid=>$blueobj, combine=>'diff' }, aa=>1),
"concave fill arc aa");
ok($img->circle(x=>25, y=>325, r=>20, color=>$redobj),
"color circle no aa");
ok($img->circle(x=>75, y=>325, r=>20, color=>$redobj, aa=>1),
"color circle aa");
ok($img->circle(x=>25, 'y'=>375, r=>20,
fill => { hatch=>'stipple', fg=>$blueobj, bg=>$redobj }),
"fill circle no aa");
ok($img->circle(x=>75, 'y'=>375, r=>20, aa=>1,
fill => { hatch=>'stipple', fg=>$blueobj, bg=>$redobj }),
"fill circle aa");
ok($img->arc(x=>50, y=>450, r=>45, d1=>135, d2=>45,
fill => { solid=>$blueobj, combine=>'diff' }),
"another concave fillarc");
angle_marker($img, 50, 450, 47, 45, 135);
ok($img->write(file=>'testout/t21draw.ppm'),
"saving output");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
ok($im->arc(x => 200, y => 202, r => 10, filled => 0),
"draw circle outline");
is_color3($im->getpixel(x => 200, y => 202), 0, 0, 0,
"check center not filled");
ok($im->arc(x => 198, y => 200, r => 13, filled => 0, color => "#f88"),
"draw circle outline");
is_color3($im->getpixel(x => 198, y => 200), 0, 0, 0,
"check center not filled");
ok($im->arc(x => 200, y => 200, r => 24, filled => 0, color => "#0ff"),
"draw circle outline");
my $r = 40;
while ($r < 180) {
ok($im->arc(x => 200, y => 200, r => $r, filled => 0, color => "#ff0"),
"draw circle outline r $r");
$r += 15;
}
ok($im->write(file => "testout/t21circout.ppm"),
"save arc outline");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
{
my $lc = Imager::Color->new(32, 32, 32);
my $an = 0;
while ($an < 360) {
my $an_r = $an * PI / 180;
my $ca = cos($an_r);
my $sa = sin($an_r);
$im->line(aa => 1, color => $lc,
x1 => 198 + 5 * $ca, y1 => 202 + 5 * $sa,
x2 => 198 + 190 * $ca, y2 => 202 + 190 * $sa);
$an += 5;
}
}
my $d1 = 0;
my $r = 20;
while ($d1 < 350) {
ok($im->arc(x => 198, y => 202, r => $r, d1 => $d1, d2 => $d1+300, filled => 0),
"draw arc outline r$r d1$d1 len 300");
ok($im->arc(x => 198, y => 202, r => $r+3, d1 => $d1, d2 => $d1+40, filled => 0, color => '#FFFF00'),
"draw arc outline r$r d1$d1 len 40");
$d1 += 15;
$r += 6;
}
is_color3($im->getpixel(x => 198, y => 202), 0, 0, 0,
"check center not filled");
ok($im->write(file => "testout/t21arcout.ppm"),
"save arc outline");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
ok($im->arc(x => 197, y => 201, r => 10, filled => 0, aa => 1, color => 'white'),
"draw circle outline");
is_color3($im->getpixel(x => 197, y => 201), 0, 0, 0,
"check center not filled");
ok($im->arc(x => 197, y => 205, r => 13, filled => 0, color => "#f88", aa => 1),
"draw circle outline");
is_color3($im->getpixel(x => 197, y => 205), 0, 0, 0,
"check center not filled");
ok($im->arc(x => 190, y => 215, r => 24, filled => 0, color => [0,0, 255, 128], aa => 1),
"draw circle outline");
my $r = 40;
while ($r < 190) {
ok($im->arc(x => 197, y => 201, r => $r, filled => 0, aa => 1, color => '#ff0'), "draw aa circle rad $r");
$r += 7;
}
ok($im->write(file => "testout/t21aacircout.ppm"),
"save arc outline");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
{
my $lc = Imager::Color->new(32, 32, 32);
my $an = 0;
while ($an < 360) {
my $an_r = $an * PI / 180;
my $ca = cos($an_r);
my $sa = sin($an_r);
$im->line(aa => 1, color => $lc,
x1 => 198 + 5 * $ca, y1 => 202 + 5 * $sa,
x2 => 198 + 190 * $ca, y2 => 202 + 190 * $sa);
$an += 5;
}
}
my $d1 = 0;
my $r = 20;
while ($d1 < 350) {
ok($im->arc(x => 198, y => 202, r => $r, d1 => $d1, d2 => $d1+300, filled => 0, aa => 1),
"draw aa arc outline r$r d1$d1 len 300");
ok($im->arc(x => 198, y => 202, r => $r+3, d1 => $d1, d2 => $d1+40, filled => 0, color => '#FFFF00', aa => 1),
"draw aa arc outline r$r d1$d1 len 40");
$d1 += 15;
$r += 6;
}
is_color3($im->getpixel(x => 198, y => 202), 0, 0, 0,
"check center not filled");
ok($im->write(file => "testout/t21aaarcout.ppm"),
"save arc outline");
}
{
my $im = Imager->new(xsize => 400, ysize => 400);
my $an = 0;
my $step = 15;
while ($an <= 360-$step) {
my $cx = int(200 + 20 * cos(($an+$step/2) * PI / 180));
my $cy = int(200 + 20 * sin(($an+$step/2) * PI / 180));
ok($im->arc(x => $cx, y => $cy, aa => 1, color => "#fff",
d1 => $an, d2 => $an+$step, filled => 0, r => 170),
"angle starting from $an");
ok($im->arc(x => $cx+0.5, y => $cy+0.5, aa => 1, color => "#ff0",
d1 => $an, d2 => $an+$step, r => 168),
"filled angle starting from $an");
$an += $step;
}
ok($im->write(file => "testout/t21aaarcs.ppm"),
"save arc outline");
}
{
# we document that drawing from d1 to d2 where d2 > d1 will draw an
# arc going through 360 degrees, test that
my $im = Imager->new(xsize => 200, ysize => 200);
ok($im->arc(x => 100, y => 100, aa => 0, filled => 0, color => '#fff',
d1 => 270, d2 => 90, r => 90), "draw non-aa arc through 0");
ok($im->arc(x => 100, y => 100, aa => 1, filled => 0, color => '#fff',
d1 => 270, d2 => 90, r => 80), "draw aa arc through 0");
ok($im->write(file => "testout/t21arc0.ppm"),
"save arc through 0");
}
{
# test drawing color defaults
{
my $im = Imager->new(xsize => 10, ysize => 10);
ok($im->box(), "default outline the image"); # should outline the image
is_color3($im->getpixel(x => 0, y => 0), 255, 255, 255,
"check outline default color TL");
is_color3($im->getpixel(x => 9, y => 5), 255, 255, 255,
"check outline default color MR");
}
{
my $im = Imager->new(xsize => 10, ysize => 10);
ok($im->box(filled => 1), "default fill the image"); # should fill the image
is_color3($im->getpixel(x => 0, y => 0), 255, 255, 255,
"check fill default color TL");
is_color3($im->getpixel(x => 5, y => 5), 255, 255, 255,
"check fill default color MM");
}
}
malloc_state();
unless ($ENV{IMAGER_KEEP_FILES}) {
unlink "testout/t21draw.ppm";
unlink "testout/t21circout.ppm";
unlink "testout/t21aacircout.ppm";
unlink "testout/t21arcout.ppm";
unlink "testout/t21aaarcout.ppm";
unlink "testout/t21aaarcs.ppm";
unlink "testout/t21arc0.ppm";
}
sub color_cmp {
my ($l, $r) = @_;
my @l = $l->rgba;
my @r = $r->rgba;
# print "# (",join(",", @l[0..2]),") <=> (",join(",", @r[0..2]),")\n";
return $l[0] <=> $r[0]
|| $l[1] <=> $r[1]
|| $l[2] <=> $r[2];
}
sub angle_marker {
my ($img, $x, $y, $radius, @angles) = @_;
for my $angle (@angles) {
my $x1 = int($x + $radius * cos($angle * PI / 180) + 0.5);
my $y1 = int($y + $radius * sin($angle * PI / 180) + 0.5);
my $x2 = int($x + (5+$radius) * cos($angle * PI / 180) + 0.5);
my $y2 = int($y + (5+$radius) * sin($angle * PI / 180) + 0.5);
$img->line(x1=>$x1, y1=>$y1, x2=>$x2, y2=>$y2, color=>'#FFF');
}
}
Jump to Line
Something went wrong with that request. Please try again.