piVCCU is a project to install the original Homematic CCU3 firmware inside a virtualized container (lxc) on ARM based single board computers.

Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.

Linux kernel 4.14+ for BPI-R2, 5.4+ for R64, 6.1+ for R2Pro and R3

BananaPi M2 Zero - Ubuntu Focal Base Minimal Image (Experimental) - U-Boot 2017.09 / Kernel 4.18.y / Kernel 4.19.y / Kernel 4.20.y / Kernel 5.3.y / Kernel 5.6.y / Kernel 5.7.y / Kernel 5.11.y

U-Boot-Bootloader for BananaPI-R2/R64/R2Pro/R3

Banana Pi M2 zero with OV5640, WiringPi and OpenCV image.

Arduino API on Pi boards, the best of both worlds !

Banana Pi M64 firmware (eMMC, Wifi, bluetooth, GbE, OV5640)

Hausautomatisierungsloesung auf CAN-Bus Basis.

Easily install & configure Speedify on OpenWrt using a web browser.

Mali framebuffer stress test tools and some experiments ( fbdev ) - RK3399 / H2+ - OpenGLES2

new OV5640 Camera Driver CSI A20 Lemaker BPI Banana Pi, Linux Sunxi Kernel 3.4.xx

Combined Smart Home

ARM Trusted Firmware for BananaPi R64

A feature-customized IoT device, built on Pi-familly devices (Orange Pi, Raspberry Pi, Banana Pi), with NFC readers supported. It aimes to use for organization check-in-out, e-identification, ... This product has been commercialized, not under research process.

A print server that gets attached to a USB printer and shares its printing capability over the network using WiFi.

Framebuffer Animations is an open-source project designed to play GIF animations on a raw framebuffer device, primarily intended for use in embedded devices

A Linux 4.4 kernel including Daniel Halperin's modified iwlwifi driver for BPI-R2 [NOTE: You may have to change "wldh-g" to "wldhg" in README links]

A Linux 5.4 kernel including Yaxiong Xie's modified ath9k driver for BPI-R2 [NOTE: You may have to change "wldh-g" to "wldhg" in README links]