Permalink
Cannot retrieve contributors at this time
761 lines (642 sloc)
14.6 KB
| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) | |
| /* | |
| * RK3399-based FriendlyElec boards device tree source | |
| * | |
| * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd | |
| * | |
| * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. | |
| * (http://www.friendlyarm.com) | |
| * | |
| * Copyright (c) 2018 Collabora Ltd. | |
| * Copyright (c) 2019 Arm Ltd. | |
| */ | |
| /dts-v1/; | |
| #include <dt-bindings/input/linux-event-codes.h> | |
| #include "rk3399.dtsi" | |
| #include "rk3399-opp.dtsi" | |
| / { | |
| aliases { | |
| mmc0 = &sdio0; | |
| mmc1 = &sdmmc; | |
| mmc2 = &sdhci; | |
| }; | |
| chosen { | |
| stdout-path = "serial2:1500000n8"; | |
| }; | |
| clkin_gmac: external-gmac-clock { | |
| compatible = "fixed-clock"; | |
| clock-frequency = <125000000>; | |
| clock-output-names = "clkin_gmac"; | |
| #clock-cells = <0>; | |
| }; | |
| vcc3v3_sys: vcc3v3-sys { | |
| compatible = "regulator-fixed"; | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <3300000>; | |
| regulator-max-microvolt = <3300000>; | |
| regulator-name = "vcc3v3_sys"; | |
| }; | |
| vcc5v0_sys: vcc5v0-sys { | |
| compatible = "regulator-fixed"; | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <5000000>; | |
| regulator-max-microvolt = <5000000>; | |
| regulator-name = "vcc5v0_sys"; | |
| vin-supply = <&vdd_5v>; | |
| }; | |
| /* switched by pmic_sleep */ | |
| vcc1v8_s3: vcc1v8-s3 { | |
| compatible = "regulator-fixed"; | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-name = "vcc1v8_s3"; | |
| vin-supply = <&vcc_1v8>; | |
| }; | |
| vcc3v0_sd: vcc3v0-sd { | |
| compatible = "regulator-fixed"; | |
| enable-active-high; | |
| gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&sdmmc0_pwr_h>; | |
| regulator-always-on; | |
| regulator-min-microvolt = <3000000>; | |
| regulator-max-microvolt = <3000000>; | |
| regulator-name = "vcc3v0_sd"; | |
| vin-supply = <&vcc3v3_sys>; | |
| }; | |
| /* | |
| * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only | |
| * drives the enable pin, but we can't quite model that. | |
| */ | |
| vcca0v9_s3: vcca0v9-s3 { | |
| compatible = "regulator-fixed"; | |
| regulator-min-microvolt = <900000>; | |
| regulator-max-microvolt = <900000>; | |
| regulator-name = "vcca0v9_s3"; | |
| vin-supply = <&vcc1v8_s3>; | |
| }; | |
| /* As above, actually supplied by vcc3v3_sys */ | |
| vcca1v8_s3: vcca1v8-s3 { | |
| compatible = "regulator-fixed"; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-name = "vcca1v8_s3"; | |
| vin-supply = <&vcc1v8_s3>; | |
| }; | |
| vbus_typec: vbus-typec { | |
| compatible = "regulator-fixed"; | |
| regulator-min-microvolt = <5000000>; | |
| regulator-max-microvolt = <5000000>; | |
| regulator-name = "vbus_typec"; | |
| }; | |
| gpio-keys { | |
| compatible = "gpio-keys"; | |
| autorepeat; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&power_key>; | |
| power { | |
| debounce-interval = <100>; | |
| gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; | |
| label = "GPIO Key Power"; | |
| linux,code = <KEY_POWER>; | |
| wakeup-source; | |
| }; | |
| }; | |
| leds: gpio-leds { | |
| compatible = "gpio-leds"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&status_led_pin>; | |
| status_led: led-0 { | |
| gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; | |
| label = "status_led"; | |
| linux,default-trigger = "heartbeat"; | |
| }; | |
| }; | |
| sdio_pwrseq: sdio-pwrseq { | |
| compatible = "mmc-pwrseq-simple"; | |
| clocks = <&rk808 1>; | |
| clock-names = "ext_clock"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&wifi_reg_on_h>; | |
| reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; | |
| }; | |
| }; | |
| &cpu_b0 { | |
| cpu-supply = <&vdd_cpu_b>; | |
| }; | |
| &cpu_b1 { | |
| cpu-supply = <&vdd_cpu_b>; | |
| }; | |
| &cpu_l0 { | |
| cpu-supply = <&vdd_cpu_l>; | |
| }; | |
| &cpu_l1 { | |
| cpu-supply = <&vdd_cpu_l>; | |
| }; | |
| &cpu_l2 { | |
| cpu-supply = <&vdd_cpu_l>; | |
| }; | |
| &cpu_l3 { | |
| cpu-supply = <&vdd_cpu_l>; | |
| }; | |
| &emmc_phy { | |
| status = "okay"; | |
| }; | |
| &gmac { | |
| assigned-clock-parents = <&clkin_gmac>; | |
| assigned-clocks = <&cru SCLK_RMII_SRC>; | |
| clock_in_out = "input"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; | |
| phy-handle = <&rtl8211e>; | |
| phy-mode = "rgmii"; | |
| phy-supply = <&vcc3v3_s3>; | |
| tx_delay = <0x28>; | |
| rx_delay = <0x11>; | |
| status = "okay"; | |
| mdio { | |
| compatible = "snps,dwmac-mdio"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| rtl8211e: ethernet-phy@1 { | |
| reg = <1>; | |
| interrupt-parent = <&gpio3>; | |
| interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; | |
| reset-assert-us = <10000>; | |
| reset-deassert-us = <30000>; | |
| reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; | |
| }; | |
| }; | |
| }; | |
| &gpu { | |
| mali-supply = <&vdd_gpu>; | |
| status = "okay"; | |
| }; | |
| &hdmi { | |
| ddc-i2c-bus = <&i2c7>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&hdmi_cec>; | |
| status = "okay"; | |
| }; | |
| &hdmi_sound { | |
| status = "okay"; | |
| }; | |
| &i2c0 { | |
| clock-frequency = <400000>; | |
| i2c-scl-rising-time-ns = <160>; | |
| i2c-scl-falling-time-ns = <30>; | |
| status = "okay"; | |
| vdd_cpu_b: regulator@40 { | |
| compatible = "silergy,syr827"; | |
| reg = <0x40>; | |
| fcs,suspend-voltage-selector = <1>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&cpu_b_sleep>; | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <712500>; | |
| regulator-max-microvolt = <1500000>; | |
| regulator-name = "vdd_cpu_b"; | |
| regulator-ramp-delay = <1000>; | |
| vin-supply = <&vcc3v3_sys>; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| vdd_gpu: regulator@41 { | |
| compatible = "silergy,syr828"; | |
| reg = <0x41>; | |
| fcs,suspend-voltage-selector = <1>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&gpu_sleep>; | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <712500>; | |
| regulator-max-microvolt = <1500000>; | |
| regulator-name = "vdd_gpu"; | |
| regulator-ramp-delay = <1000>; | |
| vin-supply = <&vcc3v3_sys>; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| rk808: pmic@1b { | |
| compatible = "rockchip,rk808"; | |
| reg = <0x1b>; | |
| clock-output-names = "xin32k", "rtc_clko_wifi"; | |
| #clock-cells = <1>; | |
| interrupt-parent = <&gpio1>; | |
| interrupts = <21 IRQ_TYPE_LEVEL_LOW>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&pmic_int_l>; | |
| rockchip,system-power-controller; | |
| wakeup-source; | |
| vcc1-supply = <&vcc3v3_sys>; | |
| vcc2-supply = <&vcc3v3_sys>; | |
| vcc3-supply = <&vcc3v3_sys>; | |
| vcc4-supply = <&vcc3v3_sys>; | |
| vcc6-supply = <&vcc3v3_sys>; | |
| vcc7-supply = <&vcc3v3_sys>; | |
| vcc8-supply = <&vcc3v3_sys>; | |
| vcc9-supply = <&vcc3v3_sys>; | |
| vcc10-supply = <&vcc3v3_sys>; | |
| vcc11-supply = <&vcc3v3_sys>; | |
| vcc12-supply = <&vcc3v3_sys>; | |
| vddio-supply = <&vcc_3v0>; | |
| regulators { | |
| vdd_center: DCDC_REG1 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <750000>; | |
| regulator-max-microvolt = <1350000>; | |
| regulator-name = "vdd_center"; | |
| regulator-ramp-delay = <6001>; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| vdd_cpu_l: DCDC_REG2 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <750000>; | |
| regulator-max-microvolt = <1350000>; | |
| regulator-name = "vdd_cpu_l"; | |
| regulator-ramp-delay = <6001>; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| vcc_ddr: DCDC_REG3 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-name = "vcc_ddr"; | |
| regulator-state-mem { | |
| regulator-on-in-suspend; | |
| }; | |
| }; | |
| vcc_1v8: DCDC_REG4 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-name = "vcc_1v8"; | |
| regulator-state-mem { | |
| regulator-on-in-suspend; | |
| regulator-suspend-microvolt = <1800000>; | |
| }; | |
| }; | |
| vcc1v8_cam: LDO_REG1 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-name = "vcc1v8_cam"; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| vcc3v0_touch: LDO_REG2 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <3000000>; | |
| regulator-max-microvolt = <3000000>; | |
| regulator-name = "vcc3v0_touch"; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| vcc1v8_pmupll: LDO_REG3 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-name = "vcc1v8_pmupll"; | |
| regulator-state-mem { | |
| regulator-on-in-suspend; | |
| regulator-suspend-microvolt = <1800000>; | |
| }; | |
| }; | |
| vcc_sdio: LDO_REG4 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-init-microvolt = <3000000>; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <3300000>; | |
| regulator-name = "vcc_sdio"; | |
| regulator-state-mem { | |
| regulator-on-in-suspend; | |
| regulator-suspend-microvolt = <3000000>; | |
| }; | |
| }; | |
| vcca3v0_codec: LDO_REG5 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <3000000>; | |
| regulator-max-microvolt = <3000000>; | |
| regulator-name = "vcca3v0_codec"; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| vcc_1v5: LDO_REG6 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <1500000>; | |
| regulator-max-microvolt = <1500000>; | |
| regulator-name = "vcc_1v5"; | |
| regulator-state-mem { | |
| regulator-on-in-suspend; | |
| regulator-suspend-microvolt = <1500000>; | |
| }; | |
| }; | |
| vcca1v8_codec: LDO_REG7 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-name = "vcca1v8_codec"; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| vcc_3v0: LDO_REG8 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-min-microvolt = <3000000>; | |
| regulator-max-microvolt = <3000000>; | |
| regulator-name = "vcc_3v0"; | |
| regulator-state-mem { | |
| regulator-on-in-suspend; | |
| regulator-suspend-microvolt = <3000000>; | |
| }; | |
| }; | |
| vcc3v3_s3: SWITCH_REG1 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-name = "vcc3v3_s3"; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| vcc3v3_s0: SWITCH_REG2 { | |
| regulator-always-on; | |
| regulator-boot-on; | |
| regulator-name = "vcc3v3_s0"; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; | |
| &i2c1 { | |
| clock-frequency = <200000>; | |
| i2c-scl-rising-time-ns = <150>; | |
| i2c-scl-falling-time-ns = <30>; | |
| status = "okay"; | |
| }; | |
| &i2c2 { | |
| status = "okay"; | |
| }; | |
| &i2c4 { | |
| clock-frequency = <400000>; | |
| i2c-scl-rising-time-ns = <160>; | |
| i2c-scl-falling-time-ns = <30>; | |
| status = "okay"; | |
| fusb0: typec-portc@22 { | |
| compatible = "fcs,fusb302"; | |
| reg = <0x22>; | |
| interrupt-parent = <&gpio1>; | |
| interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&fusb0_int>; | |
| vbus-supply = <&vbus_typec>; | |
| }; | |
| }; | |
| &i2c7 { | |
| status = "okay"; | |
| }; | |
| &i2s2 { | |
| status = "okay"; | |
| }; | |
| &io_domains { | |
| bt656-supply = <&vcc_1v8>; | |
| audio-supply = <&vcca1v8_codec>; | |
| sdmmc-supply = <&vcc_sdio>; | |
| gpio1830-supply = <&vcc_3v0>; | |
| status = "okay"; | |
| }; | |
| &pcie_phy { | |
| assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; | |
| assigned-clock-rates = <100000000>; | |
| assigned-clocks = <&cru SCLK_PCIEPHY_REF>; | |
| status = "okay"; | |
| }; | |
| &pcie0 { | |
| num-lanes = <2>; | |
| vpcie0v9-supply = <&vcca0v9_s3>; | |
| vpcie1v8-supply = <&vcca1v8_s3>; | |
| status = "okay"; | |
| }; | |
| &pinctrl { | |
| fusb30x { | |
| fusb0_int: fusb0-int { | |
| rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; | |
| }; | |
| }; | |
| gpio-leds { | |
| status_led_pin: status-led-pin { | |
| rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; | |
| }; | |
| }; | |
| gmac { | |
| phy_intb: phy-intb { | |
| rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; | |
| }; | |
| phy_rstb: phy-rstb { | |
| rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; | |
| }; | |
| }; | |
| pmic { | |
| cpu_b_sleep: cpu-b-sleep { | |
| rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; | |
| }; | |
| gpu_sleep: gpu-sleep { | |
| rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; | |
| }; | |
| pmic_int_l: pmic-int-l { | |
| rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; | |
| }; | |
| }; | |
| rockchip-key { | |
| power_key: power-key { | |
| rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; | |
| }; | |
| }; | |
| sdio { | |
| bt_host_wake_l: bt-host-wake-l { | |
| rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; | |
| }; | |
| bt_reg_on_h: bt-reg-on-h { | |
| /* external pullup to VCC1V8_PMUPLL */ | |
| rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; | |
| }; | |
| bt_wake_l: bt-wake-l { | |
| rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; | |
| }; | |
| wifi_reg_on_h: wifi-reg_on-h { | |
| rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; | |
| }; | |
| }; | |
| sdmmc { | |
| sdmmc0_det_l: sdmmc0-det-l { | |
| rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; | |
| }; | |
| sdmmc0_pwr_h: sdmmc0-pwr-h { | |
| rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; | |
| }; | |
| }; | |
| }; | |
| &pmu_io_domains { | |
| pmu1830-supply = <&vcc_3v0>; | |
| status = "okay"; | |
| }; | |
| &pwm0 { | |
| status = "okay"; | |
| }; | |
| &pwm1 { | |
| status = "okay"; | |
| }; | |
| &pwm2 { | |
| pinctrl-names = "active"; | |
| pinctrl-0 = <&pwm2_pin_pull_down>; | |
| status = "okay"; | |
| }; | |
| &saradc { | |
| vref-supply = <&vcca1v8_s3>; | |
| status = "okay"; | |
| }; | |
| &sdhci { | |
| bus-width = <8>; | |
| mmc-hs200-1_8v; | |
| non-removable; | |
| status = "okay"; | |
| }; | |
| &sdio0 { | |
| bus-width = <4>; | |
| cap-sd-highspeed; | |
| cap-sdio-irq; | |
| keep-power-in-suspend; | |
| mmc-pwrseq = <&sdio_pwrseq>; | |
| non-removable; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; | |
| sd-uhs-sdr104; | |
| status = "okay"; | |
| }; | |
| &sdmmc { | |
| bus-width = <4>; | |
| cap-sd-highspeed; | |
| cap-mmc-highspeed; | |
| cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; | |
| disable-wp; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>; | |
| sd-uhs-sdr104; | |
| vmmc-supply = <&vcc3v0_sd>; | |
| vqmmc-supply = <&vcc_sdio>; | |
| status = "okay"; | |
| }; | |
| &tcphy0 { | |
| status = "okay"; | |
| }; | |
| &tcphy1 { | |
| status = "okay"; | |
| }; | |
| &tsadc { | |
| /* tshut mode 0:CRU 1:GPIO */ | |
| rockchip,hw-tshut-mode = <1>; | |
| /* tshut polarity 0:LOW 1:HIGH */ | |
| rockchip,hw-tshut-polarity = <1>; | |
| status = "okay"; | |
| }; | |
| &u2phy0 { | |
| status = "okay"; | |
| }; | |
| &u2phy0_host { | |
| status = "okay"; | |
| }; | |
| &u2phy0_otg { | |
| status = "okay"; | |
| }; | |
| &u2phy1 { | |
| status = "okay"; | |
| }; | |
| &u2phy1_host { | |
| status = "okay"; | |
| }; | |
| &u2phy1_otg { | |
| status = "okay"; | |
| }; | |
| &uart0 { | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; | |
| status = "okay"; | |
| bluetooth { | |
| compatible = "brcm,bcm43438-bt"; | |
| clocks = <&rk808 1>; | |
| clock-names = "lpo"; | |
| device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; | |
| host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; | |
| shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; | |
| max-speed = <4000000>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; | |
| vbat-supply = <&vcc3v3_sys>; | |
| vddio-supply = <&vcc_1v8>; | |
| }; | |
| }; | |
| &uart2 { | |
| status = "okay"; | |
| }; | |
| &usbdrd3_0 { | |
| status = "okay"; | |
| }; | |
| &usbdrd3_1 { | |
| status = "okay"; | |
| }; | |
| &usbdrd_dwc3_0 { | |
| status = "okay"; | |
| }; | |
| &usbdrd_dwc3_1 { | |
| dr_mode = "host"; | |
| status = "okay"; | |
| }; | |
| &usb_host0_ehci { | |
| status = "okay"; | |
| }; | |
| &usb_host0_ohci { | |
| status = "okay"; | |
| }; | |
| &usb_host1_ehci { | |
| status = "okay"; | |
| }; | |
| &usb_host1_ohci { | |
| status = "okay"; | |
| }; | |
| &vopb { | |
| status = "okay"; | |
| }; | |
| &vopb_mmu { | |
| status = "okay"; | |
| }; | |
| &vopl { | |
| status = "okay"; | |
| }; | |
| &vopl_mmu { | |
| status = "okay"; | |
| }; |