Permalink
Fetching contributors…
Cannot retrieve contributors at this time
412 lines (341 sloc) 11.5 KB
#
# Accelerometer drivers
#
# When adding new entries keep the list in alphabetical order
menu "Accelerometers"
config ADIS16201
tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
depends on SPI
select IIO_ADIS_LIB
select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say Y here to build support for Analog Devices adis16201 dual-axis
digital inclinometer and accelerometer.
To compile this driver as a module, say M here: the module will
be called adis16201.
config ADIS16209
tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
depends on SPI
select IIO_ADIS_LIB
select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer
and accelerometer.
To compile this driver as a module, say M here: the module will be
called adis16209.
config ADXL345
tristate
config ADXL345_I2C
tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver"
depends on INPUT_ADXL34X=n
depends on I2C
select ADXL345
select REGMAP_I2C
help
Say Y here if you want to build support for the Analog Devices
ADXL345 or ADXL375 3-axis digital accelerometer.
To compile this driver as a module, choose M here: the module
will be called adxl345_i2c and you will also get adxl345_core
for the core module.
config ADXL345_SPI
tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer SPI Driver"
depends on INPUT_ADXL34X=n
depends on SPI
select ADXL345
select REGMAP_SPI
help
Say Y here if you want to build support for the Analog Devices
ADXL345 or ADXL375 3-axis digital accelerometer.
To compile this driver as a module, choose M here: the module
will be called adxl345_spi and you will also get adxl345_core
for the core module.
config BMA180
tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here if you want to build a driver for the Bosch BMA180 or
BMA250 triaxial acceleration sensor.
To compile this driver as a module, choose M here: the
module will be called bma180.
config BMA220
tristate "Bosch BMA220 3-Axis Accelerometer Driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to add support for the Bosch BMA220 triaxial
acceleration sensor.
To compile this driver as a module, choose M here: the
module will be called bma220_spi.
config BMC150_ACCEL
tristate "Bosch BMC150 Accelerometer Driver"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP
select BMC150_ACCEL_I2C if I2C
select BMC150_ACCEL_SPI if SPI
help
Say yes here to build support for the following Bosch accelerometers:
BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
This is a combo module with both accelerometer and magnetometer.
This driver is only implementing accelerometer part, which has
its own address and register map.
config BMC150_ACCEL_I2C
tristate
select REGMAP_I2C
config BMC150_ACCEL_SPI
tristate
select REGMAP_SPI
config DA280
tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver"
depends on I2C
help
Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit
digital accelerometer.
To compile this driver as a module, choose M here: the
module will be called da280.
config DA311
tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver"
depends on I2C
help
Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit
digital accelerometer.
To compile this driver as a module, choose M here: the
module will be called da311.
config DMARD06
tristate "Domintech DMARD06 Digital Accelerometer Driver"
depends on OF || COMPILE_TEST
depends on I2C
help
Say yes here to build support for the Domintech low-g tri-axial
digital accelerometers: DMARD05, DMARD06, DMARD07.
To compile this driver as a module, choose M here: the
module will be called dmard06.
config DMARD09
tristate "Domintech DMARD09 3-axis Accelerometer Driver"
depends on I2C
help
Say yes here to get support for the Domintech DMARD09 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called dmard09.
config DMARD10
tristate "Domintech DMARD10 3-axis Accelerometer Driver"
depends on I2C
help
Say yes here to get support for the Domintech DMARD10 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called dmard10.
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Accelerometers 3D"
help
Say yes here to build support for the HID SENSOR
accelerometers 3D.
To compile this driver as a module, choose M here: the
module will be called hid-sensor-accel-3d.
config IIO_CROS_EC_ACCEL_LEGACY
tristate "ChromeOS EC Legacy Accelerometer Sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select CROS_EC_LPC_REGISTER_DEVICE
help
Say yes here to get support for accelerometers on Chromebook using
legacy EC firmware.
Sensor data is retrieved through IO memory.
Newer devices should use IIO_CROS_EC_SENSORS.
config IIO_ST_ACCEL_3AXIS
tristate "STMicroelectronics accelerometers 3-Axis Driver"
depends on (I2C || SPI_MASTER) && SYSFS
depends on !SENSORS_LIS3_I2C
depends on !SENSORS_LIS3_SPI
select IIO_ST_SENSORS_CORE
select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics accelerometers:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
LNG2DM
This driver can also be built as a module. If so, these modules
will be created:
- st_accel (core functions for the driver [it is mandatory]);
- st_accel_i2c (necessary for the I2C devices [optional*]);
- st_accel_spi (necessary for the SPI devices [optional*]);
(*) one of these is necessary to do something.
config IIO_ST_ACCEL_I2C_3AXIS
tristate
depends on IIO_ST_ACCEL_3AXIS
depends on IIO_ST_SENSORS_I2C
config IIO_ST_ACCEL_SPI_3AXIS
tristate
depends on IIO_ST_ACCEL_3AXIS
depends on IIO_ST_SENSORS_SPI
config KXSD9
tristate "Kionix KXSD9 Accelerometer Driver"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the Kionix KXSD9 accelerometer.
It can be accessed using an (optional) SPI or I2C interface.
To compile this driver as a module, choose M here: the module
will be called kxsd9.
config KXSD9_SPI
tristate "Kionix KXSD9 SPI transport"
depends on KXSD9
depends on SPI
default KXSD9
select REGMAP_SPI
help
Say yes here to enable the Kionix KXSD9 accelerometer
SPI transport channel.
config KXSD9_I2C
tristate "Kionix KXSD9 I2C transport"
depends on KXSD9
depends on I2C
default KXSD9
select REGMAP_I2C
help
Say yes here to enable the Kionix KXSD9 accelerometer
I2C transport channel.
config KXCJK1013
tristate "Kionix 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here if you want to build a driver for the Kionix KXCJK-1013
triaxial acceleration sensor. This driver also supports KXCJ9-1008,
KXTJ2-1009 and KXTF9.
To compile this driver as a module, choose M here: the module will
be called kxcjk-1013.
config MC3230
tristate "mCube MC3230 Digital Accelerometer Driver"
depends on I2C
help
Say yes here to build support for the mCube MC3230 low-g tri-axial
digital accelerometer.
To compile this driver as a module, choose M here: the
module will be called mc3230.
config MMA7455
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config MMA7455_I2C
tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
depends on I2C
select MMA7455
select REGMAP_I2C
help
Say yes here to build support for the Freescale MMA7455L and
MMA7456L 3-axis accelerometer.
To compile this driver as a module, choose M here: the module
will be called mma7455_i2c.
config MMA7455_SPI
tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
depends on SPI_MASTER
select MMA7455
select REGMAP_SPI
help
Say yes here to build support for the Freescale MMA7455L and
MMA7456L 3-axis accelerometer.
To compile this driver as a module, choose M here: the module
will be called mma7455_spi.
config MMA7660
tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver"
depends on I2C
help
Say yes here to get support for the Freescale MMA7660FC 3-Axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called mma7660.
config MMA8452
tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the following Freescale / NXP 3-axis
accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
FXLS8471Q.
To compile this driver as a module, choose M here: the module
will be called mma8452.
config MMA9551_CORE
tristate
config MMA9551
tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
depends on I2C
select MMA9551_CORE
help
Say yes here to build support for the Freescale MMA9551L
Intelligent Motion-Sensing Platform Driver.
To compile this driver as a module, choose M here: the module
will be called mma9551.
config MMA9553
tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
depends on I2C
select MMA9551_CORE
help
Say yes here to build support for the Freescale MMA9553L
Intelligent Pedometer Platform Driver.
To compile this driver as a module, choose M here: the module
will be called mma9553.
config MXC4005
tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
help
Say yes here to build support for the Memsic MXC4005XC 3-axis
accelerometer.
To compile this driver as a module, choose M. The module will be
called mxc4005.
config MXC6255
tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
depends on I2C
select REGMAP_I2C
help
Say yes here to build support for the Memsic MXC6255 Orientation
Sensing Accelerometer Driver.
To compile this driver as a module, choose M here: the module will be
called mxc6255.
config SCA3000
select IIO_BUFFER
select IIO_KFIFO_BUF
depends on SPI
tristate "VTI SCA3000 series accelerometers"
help
Say Y here to build support for the VTI SCA3000 series of SPI
accelerometers. These devices use a hardware ring buffer.
To compile this driver as a module, say M here: the module will be
called sca3000.
config STK8312
tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to get support for the Sensortek STK8312 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called stk8312.
config STK8BA50
tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to get support for the Sensortek STK8BA50 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called stk8ba50.
endmenu