Permalink
Cannot retrieve contributors at this time
764 lines (625 sloc)
19.9 KB
| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * An RTC driver for Allwinner A31/A23 | |
| * | |
| * Copyright (c) 2014, Chen-Yu Tsai <wens@csie.org> | |
| * | |
| * based on rtc-sunxi.c | |
| * | |
| * An RTC driver for Allwinner A10/A20 | |
| * | |
| * Copyright (c) 2013, Carlo Caione <carlo.caione@gmail.com> | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/delay.h> | |
| #include <linux/err.h> | |
| #include <linux/fs.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/rtc.h> | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| /* Control register */ | |
| #define SUN6I_LOSC_CTRL 0x0000 | |
| #define SUN6I_LOSC_CTRL_KEY (0x16aa << 16) | |
| #define SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS BIT(15) | |
| #define SUN6I_LOSC_CTRL_ALM_DHMS_ACC BIT(9) | |
| #define SUN6I_LOSC_CTRL_RTC_HMS_ACC BIT(8) | |
| #define SUN6I_LOSC_CTRL_RTC_YMD_ACC BIT(7) | |
| #define SUN6I_LOSC_CTRL_EXT_LOSC_EN BIT(4) | |
| #define SUN6I_LOSC_CTRL_EXT_OSC BIT(0) | |
| #define SUN6I_LOSC_CTRL_ACC_MASK GENMASK(9, 7) | |
| #define SUN6I_LOSC_CLK_PRESCAL 0x0008 | |
| /* RTC */ | |
| #define SUN6I_RTC_YMD 0x0010 | |
| #define SUN6I_RTC_HMS 0x0014 | |
| /* Alarm 0 (counter) */ | |
| #define SUN6I_ALRM_COUNTER 0x0020 | |
| #define SUN6I_ALRM_CUR_VAL 0x0024 | |
| #define SUN6I_ALRM_EN 0x0028 | |
| #define SUN6I_ALRM_EN_CNT_EN BIT(0) | |
| #define SUN6I_ALRM_IRQ_EN 0x002c | |
| #define SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN BIT(0) | |
| #define SUN6I_ALRM_IRQ_STA 0x0030 | |
| #define SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND BIT(0) | |
| /* Alarm 1 (wall clock) */ | |
| #define SUN6I_ALRM1_EN 0x0044 | |
| #define SUN6I_ALRM1_IRQ_EN 0x0048 | |
| #define SUN6I_ALRM1_IRQ_STA 0x004c | |
| #define SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND BIT(0) | |
| /* Alarm config */ | |
| #define SUN6I_ALARM_CONFIG 0x0050 | |
| #define SUN6I_ALARM_CONFIG_WAKEUP BIT(0) | |
| #define SUN6I_LOSC_OUT_GATING 0x0060 | |
| #define SUN6I_LOSC_OUT_GATING_EN_OFFSET 0 | |
| /* | |
| * Get date values | |
| */ | |
| #define SUN6I_DATE_GET_DAY_VALUE(x) ((x) & 0x0000001f) | |
| #define SUN6I_DATE_GET_MON_VALUE(x) (((x) & 0x00000f00) >> 8) | |
| #define SUN6I_DATE_GET_YEAR_VALUE(x) (((x) & 0x003f0000) >> 16) | |
| #define SUN6I_LEAP_GET_VALUE(x) (((x) & 0x00400000) >> 22) | |
| /* | |
| * Get time values | |
| */ | |
| #define SUN6I_TIME_GET_SEC_VALUE(x) ((x) & 0x0000003f) | |
| #define SUN6I_TIME_GET_MIN_VALUE(x) (((x) & 0x00003f00) >> 8) | |
| #define SUN6I_TIME_GET_HOUR_VALUE(x) (((x) & 0x001f0000) >> 16) | |
| /* | |
| * Set date values | |
| */ | |
| #define SUN6I_DATE_SET_DAY_VALUE(x) ((x) & 0x0000001f) | |
| #define SUN6I_DATE_SET_MON_VALUE(x) ((x) << 8 & 0x00000f00) | |
| #define SUN6I_DATE_SET_YEAR_VALUE(x) ((x) << 16 & 0x003f0000) | |
| #define SUN6I_LEAP_SET_VALUE(x) ((x) << 22 & 0x00400000) | |
| /* | |
| * Set time values | |
| */ | |
| #define SUN6I_TIME_SET_SEC_VALUE(x) ((x) & 0x0000003f) | |
| #define SUN6I_TIME_SET_MIN_VALUE(x) ((x) << 8 & 0x00003f00) | |
| #define SUN6I_TIME_SET_HOUR_VALUE(x) ((x) << 16 & 0x001f0000) | |
| /* | |
| * The year parameter passed to the driver is usually an offset relative to | |
| * the year 1900. This macro is used to convert this offset to another one | |
| * relative to the minimum year allowed by the hardware. | |
| * | |
| * The year range is 1970 - 2033. This range is selected to match Allwinner's | |
| * driver, even though it is somewhat limited. | |
| */ | |
| #define SUN6I_YEAR_MIN 1970 | |
| #define SUN6I_YEAR_OFF (SUN6I_YEAR_MIN - 1900) | |
| /* | |
| * There are other differences between models, including: | |
| * | |
| * - number of GPIO pins that can be configured to hold a certain level | |
| * - crypto-key related registers (H5, H6) | |
| * - boot process related (super standby, secondary processor entry address) | |
| * registers (R40, H6) | |
| * - SYS power domain controls (R40) | |
| * - DCXO controls (H6) | |
| * - RC oscillator calibration (H6) | |
| * | |
| * These functions are not covered by this driver. | |
| */ | |
| struct sun6i_rtc_clk_data { | |
| unsigned long rc_osc_rate; | |
| unsigned int fixed_prescaler : 16; | |
| unsigned int has_prescaler : 1; | |
| unsigned int has_out_clk : 1; | |
| unsigned int export_iosc : 1; | |
| unsigned int has_losc_en : 1; | |
| unsigned int has_auto_swt : 1; | |
| }; | |
| struct sun6i_rtc_dev { | |
| struct rtc_device *rtc; | |
| const struct sun6i_rtc_clk_data *data; | |
| void __iomem *base; | |
| int irq; | |
| unsigned long alarm; | |
| struct clk_hw hw; | |
| struct clk_hw *int_osc; | |
| struct clk *losc; | |
| struct clk *ext_losc; | |
| spinlock_t lock; | |
| }; | |
| static struct sun6i_rtc_dev *sun6i_rtc; | |
| static unsigned long sun6i_rtc_osc_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw); | |
| u32 val = 0; | |
| val = readl(rtc->base + SUN6I_LOSC_CTRL); | |
| if (val & SUN6I_LOSC_CTRL_EXT_OSC) | |
| return parent_rate; | |
| if (rtc->data->fixed_prescaler) | |
| parent_rate /= rtc->data->fixed_prescaler; | |
| if (rtc->data->has_prescaler) { | |
| val = readl(rtc->base + SUN6I_LOSC_CLK_PRESCAL); | |
| val &= GENMASK(4, 0); | |
| } | |
| return parent_rate / (val + 1); | |
| } | |
| static u8 sun6i_rtc_osc_get_parent(struct clk_hw *hw) | |
| { | |
| struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw); | |
| return readl(rtc->base + SUN6I_LOSC_CTRL) & SUN6I_LOSC_CTRL_EXT_OSC; | |
| } | |
| static int sun6i_rtc_osc_set_parent(struct clk_hw *hw, u8 index) | |
| { | |
| struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw); | |
| unsigned long flags; | |
| u32 val; | |
| if (index > 1) | |
| return -EINVAL; | |
| spin_lock_irqsave(&rtc->lock, flags); | |
| val = readl(rtc->base + SUN6I_LOSC_CTRL); | |
| val &= ~SUN6I_LOSC_CTRL_EXT_OSC; | |
| val |= SUN6I_LOSC_CTRL_KEY; | |
| val |= index ? SUN6I_LOSC_CTRL_EXT_OSC : 0; | |
| if (rtc->data->has_losc_en) { | |
| val &= ~SUN6I_LOSC_CTRL_EXT_LOSC_EN; | |
| val |= index ? SUN6I_LOSC_CTRL_EXT_LOSC_EN : 0; | |
| } | |
| writel(val, rtc->base + SUN6I_LOSC_CTRL); | |
| spin_unlock_irqrestore(&rtc->lock, flags); | |
| return 0; | |
| } | |
| static const struct clk_ops sun6i_rtc_osc_ops = { | |
| .recalc_rate = sun6i_rtc_osc_recalc_rate, | |
| .get_parent = sun6i_rtc_osc_get_parent, | |
| .set_parent = sun6i_rtc_osc_set_parent, | |
| }; | |
| static void __init sun6i_rtc_clk_init(struct device_node *node, | |
| const struct sun6i_rtc_clk_data *data) | |
| { | |
| struct clk_hw_onecell_data *clk_data; | |
| struct sun6i_rtc_dev *rtc; | |
| struct clk_init_data init = { | |
| .ops = &sun6i_rtc_osc_ops, | |
| .name = "losc", | |
| }; | |
| const char *iosc_name = "rtc-int-osc"; | |
| const char *clkout_name = "osc32k-out"; | |
| const char *parents[2]; | |
| u32 reg; | |
| rtc = kzalloc(sizeof(*rtc), GFP_KERNEL); | |
| if (!rtc) | |
| return; | |
| rtc->data = data; | |
| clk_data = kzalloc(struct_size(clk_data, hws, 3), GFP_KERNEL); | |
| if (!clk_data) { | |
| kfree(rtc); | |
| return; | |
| } | |
| spin_lock_init(&rtc->lock); | |
| rtc->base = of_io_request_and_map(node, 0, of_node_full_name(node)); | |
| if (IS_ERR(rtc->base)) { | |
| pr_crit("Can't map RTC registers"); | |
| goto err; | |
| } | |
| reg = SUN6I_LOSC_CTRL_KEY; | |
| if (rtc->data->has_auto_swt) { | |
| /* Bypass auto-switch to int osc, on ext losc failure */ | |
| reg |= SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS; | |
| writel(reg, rtc->base + SUN6I_LOSC_CTRL); | |
| } | |
| /* Switch to the external, more precise, oscillator, if present */ | |
| if (of_get_property(node, "clocks", NULL)) { | |
| reg |= SUN6I_LOSC_CTRL_EXT_OSC; | |
| if (rtc->data->has_losc_en) | |
| reg |= SUN6I_LOSC_CTRL_EXT_LOSC_EN; | |
| } | |
| writel(reg, rtc->base + SUN6I_LOSC_CTRL); | |
| /* Yes, I know, this is ugly. */ | |
| sun6i_rtc = rtc; | |
| /* Only read IOSC name from device tree if it is exported */ | |
| if (rtc->data->export_iosc) | |
| of_property_read_string_index(node, "clock-output-names", 2, | |
| &iosc_name); | |
| rtc->int_osc = clk_hw_register_fixed_rate_with_accuracy(NULL, | |
| iosc_name, | |
| NULL, 0, | |
| rtc->data->rc_osc_rate, | |
| 300000000); | |
| if (IS_ERR(rtc->int_osc)) { | |
| pr_crit("Couldn't register the internal oscillator\n"); | |
| goto err; | |
| } | |
| parents[0] = clk_hw_get_name(rtc->int_osc); | |
| /* If there is no external oscillator, this will be NULL and ... */ | |
| parents[1] = of_clk_get_parent_name(node, 0); | |
| rtc->hw.init = &init; | |
| init.parent_names = parents; | |
| /* ... number of clock parents will be 1. */ | |
| init.num_parents = of_clk_get_parent_count(node) + 1; | |
| of_property_read_string_index(node, "clock-output-names", 0, | |
| &init.name); | |
| rtc->losc = clk_register(NULL, &rtc->hw); | |
| if (IS_ERR(rtc->losc)) { | |
| pr_crit("Couldn't register the LOSC clock\n"); | |
| goto err_register; | |
| } | |
| of_property_read_string_index(node, "clock-output-names", 1, | |
| &clkout_name); | |
| rtc->ext_losc = clk_register_gate(NULL, clkout_name, init.name, | |
| 0, rtc->base + SUN6I_LOSC_OUT_GATING, | |
| SUN6I_LOSC_OUT_GATING_EN_OFFSET, 0, | |
| &rtc->lock); | |
| if (IS_ERR(rtc->ext_losc)) { | |
| pr_crit("Couldn't register the LOSC external gate\n"); | |
| goto err_register; | |
| } | |
| clk_data->num = 2; | |
| clk_data->hws[0] = &rtc->hw; | |
| clk_data->hws[1] = __clk_get_hw(rtc->ext_losc); | |
| if (rtc->data->export_iosc) { | |
| clk_data->hws[2] = rtc->int_osc; | |
| clk_data->num = 3; | |
| } | |
| of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); | |
| return; | |
| err_register: | |
| clk_hw_unregister_fixed_rate(rtc->int_osc); | |
| err: | |
| kfree(clk_data); | |
| } | |
| static const struct sun6i_rtc_clk_data sun6i_a31_rtc_data = { | |
| .rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */ | |
| .has_prescaler = 1, | |
| }; | |
| static void __init sun6i_a31_rtc_clk_init(struct device_node *node) | |
| { | |
| sun6i_rtc_clk_init(node, &sun6i_a31_rtc_data); | |
| } | |
| CLK_OF_DECLARE_DRIVER(sun6i_a31_rtc_clk, "allwinner,sun6i-a31-rtc", | |
| sun6i_a31_rtc_clk_init); | |
| static const struct sun6i_rtc_clk_data sun8i_a23_rtc_data = { | |
| .rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */ | |
| .has_prescaler = 1, | |
| .has_out_clk = 1, | |
| }; | |
| static void __init sun8i_a23_rtc_clk_init(struct device_node *node) | |
| { | |
| sun6i_rtc_clk_init(node, &sun8i_a23_rtc_data); | |
| } | |
| CLK_OF_DECLARE_DRIVER(sun8i_a23_rtc_clk, "allwinner,sun8i-a23-rtc", | |
| sun8i_a23_rtc_clk_init); | |
| static const struct sun6i_rtc_clk_data sun8i_h3_rtc_data = { | |
| .rc_osc_rate = 16000000, | |
| .fixed_prescaler = 32, | |
| .has_prescaler = 1, | |
| .has_out_clk = 1, | |
| .export_iosc = 1, | |
| }; | |
| static void __init sun8i_h3_rtc_clk_init(struct device_node *node) | |
| { | |
| sun6i_rtc_clk_init(node, &sun8i_h3_rtc_data); | |
| } | |
| CLK_OF_DECLARE_DRIVER(sun8i_h3_rtc_clk, "allwinner,sun8i-h3-rtc", | |
| sun8i_h3_rtc_clk_init); | |
| /* As far as we are concerned, clocks for H5 are the same as H3 */ | |
| CLK_OF_DECLARE_DRIVER(sun50i_h5_rtc_clk, "allwinner,sun50i-h5-rtc", | |
| sun8i_h3_rtc_clk_init); | |
| static const struct sun6i_rtc_clk_data sun50i_h6_rtc_data = { | |
| .rc_osc_rate = 16000000, | |
| .fixed_prescaler = 32, | |
| .has_prescaler = 1, | |
| .has_out_clk = 1, | |
| .export_iosc = 1, | |
| .has_losc_en = 1, | |
| .has_auto_swt = 1, | |
| }; | |
| static void __init sun50i_h6_rtc_clk_init(struct device_node *node) | |
| { | |
| sun6i_rtc_clk_init(node, &sun50i_h6_rtc_data); | |
| } | |
| CLK_OF_DECLARE_DRIVER(sun50i_h6_rtc_clk, "allwinner,sun50i-h6-rtc", | |
| sun50i_h6_rtc_clk_init); | |
| /* | |
| * The R40 user manual is self-conflicting on whether the prescaler is | |
| * fixed or configurable. The clock diagram shows it as fixed, but there | |
| * is also a configurable divider in the RTC block. | |
| */ | |
| static const struct sun6i_rtc_clk_data sun8i_r40_rtc_data = { | |
| .rc_osc_rate = 16000000, | |
| .fixed_prescaler = 512, | |
| }; | |
| static void __init sun8i_r40_rtc_clk_init(struct device_node *node) | |
| { | |
| sun6i_rtc_clk_init(node, &sun8i_r40_rtc_data); | |
| } | |
| CLK_OF_DECLARE_DRIVER(sun8i_r40_rtc_clk, "allwinner,sun8i-r40-rtc", | |
| sun8i_r40_rtc_clk_init); | |
| static const struct sun6i_rtc_clk_data sun8i_v3_rtc_data = { | |
| .rc_osc_rate = 32000, | |
| .has_out_clk = 1, | |
| }; | |
| static void __init sun8i_v3_rtc_clk_init(struct device_node *node) | |
| { | |
| sun6i_rtc_clk_init(node, &sun8i_v3_rtc_data); | |
| } | |
| CLK_OF_DECLARE_DRIVER(sun8i_v3_rtc_clk, "allwinner,sun8i-v3-rtc", | |
| sun8i_v3_rtc_clk_init); | |
| static irqreturn_t sun6i_rtc_alarmirq(int irq, void *id) | |
| { | |
| struct sun6i_rtc_dev *chip = (struct sun6i_rtc_dev *) id; | |
| irqreturn_t ret = IRQ_NONE; | |
| u32 val; | |
| spin_lock(&chip->lock); | |
| val = readl(chip->base + SUN6I_ALRM_IRQ_STA); | |
| if (val & SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND) { | |
| val |= SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND; | |
| writel(val, chip->base + SUN6I_ALRM_IRQ_STA); | |
| rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF); | |
| ret = IRQ_HANDLED; | |
| } | |
| spin_unlock(&chip->lock); | |
| return ret; | |
| } | |
| static void sun6i_rtc_setaie(int to, struct sun6i_rtc_dev *chip) | |
| { | |
| u32 alrm_val = 0; | |
| u32 alrm_irq_val = 0; | |
| u32 alrm_wake_val = 0; | |
| unsigned long flags; | |
| if (to) { | |
| alrm_val = SUN6I_ALRM_EN_CNT_EN; | |
| alrm_irq_val = SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN; | |
| alrm_wake_val = SUN6I_ALARM_CONFIG_WAKEUP; | |
| } else { | |
| writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND, | |
| chip->base + SUN6I_ALRM_IRQ_STA); | |
| } | |
| spin_lock_irqsave(&chip->lock, flags); | |
| writel(alrm_val, chip->base + SUN6I_ALRM_EN); | |
| writel(alrm_irq_val, chip->base + SUN6I_ALRM_IRQ_EN); | |
| writel(alrm_wake_val, chip->base + SUN6I_ALARM_CONFIG); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| } | |
| static int sun6i_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) | |
| { | |
| struct sun6i_rtc_dev *chip = dev_get_drvdata(dev); | |
| u32 date, time; | |
| /* | |
| * read again in case it changes | |
| */ | |
| do { | |
| date = readl(chip->base + SUN6I_RTC_YMD); | |
| time = readl(chip->base + SUN6I_RTC_HMS); | |
| } while ((date != readl(chip->base + SUN6I_RTC_YMD)) || | |
| (time != readl(chip->base + SUN6I_RTC_HMS))); | |
| rtc_tm->tm_sec = SUN6I_TIME_GET_SEC_VALUE(time); | |
| rtc_tm->tm_min = SUN6I_TIME_GET_MIN_VALUE(time); | |
| rtc_tm->tm_hour = SUN6I_TIME_GET_HOUR_VALUE(time); | |
| rtc_tm->tm_mday = SUN6I_DATE_GET_DAY_VALUE(date); | |
| rtc_tm->tm_mon = SUN6I_DATE_GET_MON_VALUE(date); | |
| rtc_tm->tm_year = SUN6I_DATE_GET_YEAR_VALUE(date); | |
| rtc_tm->tm_mon -= 1; | |
| /* | |
| * switch from (data_year->min)-relative offset to | |
| * a (1900)-relative one | |
| */ | |
| rtc_tm->tm_year += SUN6I_YEAR_OFF; | |
| return 0; | |
| } | |
| static int sun6i_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm) | |
| { | |
| struct sun6i_rtc_dev *chip = dev_get_drvdata(dev); | |
| unsigned long flags; | |
| u32 alrm_st; | |
| u32 alrm_en; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| alrm_en = readl(chip->base + SUN6I_ALRM_IRQ_EN); | |
| alrm_st = readl(chip->base + SUN6I_ALRM_IRQ_STA); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| wkalrm->enabled = !!(alrm_en & SUN6I_ALRM_EN_CNT_EN); | |
| wkalrm->pending = !!(alrm_st & SUN6I_ALRM_EN_CNT_EN); | |
| rtc_time64_to_tm(chip->alarm, &wkalrm->time); | |
| return 0; | |
| } | |
| static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm) | |
| { | |
| struct sun6i_rtc_dev *chip = dev_get_drvdata(dev); | |
| struct rtc_time *alrm_tm = &wkalrm->time; | |
| struct rtc_time tm_now; | |
| unsigned long time_now = 0; | |
| unsigned long time_set = 0; | |
| unsigned long time_gap = 0; | |
| int ret = 0; | |
| ret = sun6i_rtc_gettime(dev, &tm_now); | |
| if (ret < 0) { | |
| dev_err(dev, "Error in getting time\n"); | |
| return -EINVAL; | |
| } | |
| time_set = rtc_tm_to_time64(alrm_tm); | |
| time_now = rtc_tm_to_time64(&tm_now); | |
| if (time_set <= time_now) { | |
| dev_err(dev, "Date to set in the past\n"); | |
| return -EINVAL; | |
| } | |
| time_gap = time_set - time_now; | |
| if (time_gap > U32_MAX) { | |
| dev_err(dev, "Date too far in the future\n"); | |
| return -EINVAL; | |
| } | |
| sun6i_rtc_setaie(0, chip); | |
| writel(0, chip->base + SUN6I_ALRM_COUNTER); | |
| usleep_range(100, 300); | |
| writel(time_gap, chip->base + SUN6I_ALRM_COUNTER); | |
| chip->alarm = time_set; | |
| sun6i_rtc_setaie(wkalrm->enabled, chip); | |
| return 0; | |
| } | |
| static int sun6i_rtc_wait(struct sun6i_rtc_dev *chip, int offset, | |
| unsigned int mask, unsigned int ms_timeout) | |
| { | |
| const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout); | |
| u32 reg; | |
| do { | |
| reg = readl(chip->base + offset); | |
| reg &= mask; | |
| if (!reg) | |
| return 0; | |
| } while (time_before(jiffies, timeout)); | |
| return -ETIMEDOUT; | |
| } | |
| static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm) | |
| { | |
| struct sun6i_rtc_dev *chip = dev_get_drvdata(dev); | |
| u32 date = 0; | |
| u32 time = 0; | |
| rtc_tm->tm_year -= SUN6I_YEAR_OFF; | |
| rtc_tm->tm_mon += 1; | |
| date = SUN6I_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) | | |
| SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon) | | |
| SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year); | |
| if (is_leap_year(rtc_tm->tm_year + SUN6I_YEAR_MIN)) | |
| date |= SUN6I_LEAP_SET_VALUE(1); | |
| time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec) | | |
| SUN6I_TIME_SET_MIN_VALUE(rtc_tm->tm_min) | | |
| SUN6I_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour); | |
| /* Check whether registers are writable */ | |
| if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL, | |
| SUN6I_LOSC_CTRL_ACC_MASK, 50)) { | |
| dev_err(dev, "rtc is still busy.\n"); | |
| return -EBUSY; | |
| } | |
| writel(time, chip->base + SUN6I_RTC_HMS); | |
| /* | |
| * After writing the RTC HH-MM-SS register, the | |
| * SUN6I_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not | |
| * be cleared until the real writing operation is finished | |
| */ | |
| if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL, | |
| SUN6I_LOSC_CTRL_RTC_HMS_ACC, 50)) { | |
| dev_err(dev, "Failed to set rtc time.\n"); | |
| return -ETIMEDOUT; | |
| } | |
| writel(date, chip->base + SUN6I_RTC_YMD); | |
| /* | |
| * After writing the RTC YY-MM-DD register, the | |
| * SUN6I_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not | |
| * be cleared until the real writing operation is finished | |
| */ | |
| if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL, | |
| SUN6I_LOSC_CTRL_RTC_YMD_ACC, 50)) { | |
| dev_err(dev, "Failed to set rtc time.\n"); | |
| return -ETIMEDOUT; | |
| } | |
| return 0; | |
| } | |
| static int sun6i_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) | |
| { | |
| struct sun6i_rtc_dev *chip = dev_get_drvdata(dev); | |
| if (!enabled) | |
| sun6i_rtc_setaie(enabled, chip); | |
| return 0; | |
| } | |
| static const struct rtc_class_ops sun6i_rtc_ops = { | |
| .read_time = sun6i_rtc_gettime, | |
| .set_time = sun6i_rtc_settime, | |
| .read_alarm = sun6i_rtc_getalarm, | |
| .set_alarm = sun6i_rtc_setalarm, | |
| .alarm_irq_enable = sun6i_rtc_alarm_irq_enable | |
| }; | |
| #ifdef CONFIG_PM_SLEEP | |
| /* Enable IRQ wake on suspend, to wake up from RTC. */ | |
| static int sun6i_rtc_suspend(struct device *dev) | |
| { | |
| struct sun6i_rtc_dev *chip = dev_get_drvdata(dev); | |
| if (device_may_wakeup(dev)) | |
| enable_irq_wake(chip->irq); | |
| return 0; | |
| } | |
| /* Disable IRQ wake on resume. */ | |
| static int sun6i_rtc_resume(struct device *dev) | |
| { | |
| struct sun6i_rtc_dev *chip = dev_get_drvdata(dev); | |
| if (device_may_wakeup(dev)) | |
| disable_irq_wake(chip->irq); | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(sun6i_rtc_pm_ops, | |
| sun6i_rtc_suspend, sun6i_rtc_resume); | |
| static int sun6i_rtc_probe(struct platform_device *pdev) | |
| { | |
| struct sun6i_rtc_dev *chip = sun6i_rtc; | |
| int ret; | |
| if (!chip) | |
| return -ENODEV; | |
| platform_set_drvdata(pdev, chip); | |
| chip->irq = platform_get_irq(pdev, 0); | |
| if (chip->irq < 0) | |
| return chip->irq; | |
| ret = devm_request_irq(&pdev->dev, chip->irq, sun6i_rtc_alarmirq, | |
| 0, dev_name(&pdev->dev), chip); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Could not request IRQ\n"); | |
| return ret; | |
| } | |
| /* clear the alarm counter value */ | |
| writel(0, chip->base + SUN6I_ALRM_COUNTER); | |
| /* disable counter alarm */ | |
| writel(0, chip->base + SUN6I_ALRM_EN); | |
| /* disable counter alarm interrupt */ | |
| writel(0, chip->base + SUN6I_ALRM_IRQ_EN); | |
| /* disable week alarm */ | |
| writel(0, chip->base + SUN6I_ALRM1_EN); | |
| /* disable week alarm interrupt */ | |
| writel(0, chip->base + SUN6I_ALRM1_IRQ_EN); | |
| /* clear counter alarm pending interrupts */ | |
| writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND, | |
| chip->base + SUN6I_ALRM_IRQ_STA); | |
| /* clear week alarm pending interrupts */ | |
| writel(SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND, | |
| chip->base + SUN6I_ALRM1_IRQ_STA); | |
| /* disable alarm wakeup */ | |
| writel(0, chip->base + SUN6I_ALARM_CONFIG); | |
| clk_prepare_enable(chip->losc); | |
| device_init_wakeup(&pdev->dev, 1); | |
| chip->rtc = devm_rtc_allocate_device(&pdev->dev); | |
| if (IS_ERR(chip->rtc)) | |
| return PTR_ERR(chip->rtc); | |
| chip->rtc->ops = &sun6i_rtc_ops; | |
| chip->rtc->range_max = 2019686399LL; /* 2033-12-31 23:59:59 */ | |
| ret = devm_rtc_register_device(chip->rtc); | |
| if (ret) | |
| return ret; | |
| dev_info(&pdev->dev, "RTC enabled\n"); | |
| return 0; | |
| } | |
| /* | |
| * As far as RTC functionality goes, all models are the same. The | |
| * datasheets claim that different models have different number of | |
| * registers available for non-volatile storage, but experiments show | |
| * that all SoCs have 16 registers available for this purpose. | |
| */ | |
| static const struct of_device_id sun6i_rtc_dt_ids[] = { | |
| { .compatible = "allwinner,sun6i-a31-rtc" }, | |
| { .compatible = "allwinner,sun8i-a23-rtc" }, | |
| { .compatible = "allwinner,sun8i-h3-rtc" }, | |
| { .compatible = "allwinner,sun8i-r40-rtc" }, | |
| { .compatible = "allwinner,sun8i-v3-rtc" }, | |
| { .compatible = "allwinner,sun50i-h5-rtc" }, | |
| { .compatible = "allwinner,sun50i-h6-rtc" }, | |
| { /* sentinel */ }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids); | |
| static struct platform_driver sun6i_rtc_driver = { | |
| .probe = sun6i_rtc_probe, | |
| .driver = { | |
| .name = "sun6i-rtc", | |
| .of_match_table = sun6i_rtc_dt_ids, | |
| .pm = &sun6i_rtc_pm_ops, | |
| }, | |
| }; | |
| builtin_platform_driver(sun6i_rtc_driver); |