Permalink
Browse files

[POWERPC] mpc5200: add Phytec pcm030 board support

Add board support for the Phytec pcm030 mpc5200b based board. It
does not need any platform specific fixups and as such is handled
as a mpc5200 simple platform.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
  • Loading branch information...
saschahauer authored and glikely committed Apr 25, 2008
1 parent 3cd2550 commit 106757b38fffbe1f015b10a6d4a4f92e8a3881b9
@@ -0,0 +1,363 @@
+/*
+ * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
+ *
+ * Copyright 2006 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright 2007 Pengutronix
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "phytec,pcm030";
+ compatible = "phytec,pcm030";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; /* L1, 16K */
+ i-cache-size = <0x4000>; /* L1, 16K */
+ timebase-frequency = <0>; /* From Bootloader */
+ bus-frequency = <0>; /* From Bootloader */
+ clock-frequency = <0>; /* From Bootloader */
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>; /* 64MB */
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0x0 0xf0000000 0x0000c000>;
+ bus-frequency = <0>; /* From bootloader */
+ system-frequency = <0>; /* From bootloader */
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ /* 5200 interrupts are encoded into two levels; */
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ device_type = "interrupt-controller";
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { /* General Purpose Timer */
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ cell-index = <0>;
+ reg = <0x600 0x10>;
+ interrupts = <0x1 0x9 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,has-wdt;
+ };
+
+ timer@610 { /* General Purpose Timer */
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ cell-index = <1>;
+ reg = <0x610 0x10>;
+ interrupts = <0x1 0xa 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt2: timer@620 { /* General Purpose Timer in GPIO mode */
+ compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+ cell-index = <2>;
+ reg = <0x620 0x10>;
+ interrupts = <0x1 0xb 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
+ compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+ cell-index = <3>;
+ reg = <0x630 0x10>;
+ interrupts = <0x1 0xc 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
+ compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+ cell-index = <4>;
+ reg = <0x640 0x10>;
+ interrupts = <0x1 0xd 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
+ compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+ cell-index = <5>;
+ reg = <0x650 0x10>;
+ interrupts = <0x1 0xe 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt6: timer@660 { /* General Purpose Timer in GPIO mode */
+ compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+ cell-index = <6>;
+ reg = <0x660 0x10>;
+ interrupts = <0x1 0xf 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt7: timer@670 { /* General Purpose Timer in GPIO mode */
+ compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+ cell-index = <7>;
+ reg = <0x670 0x10>;
+ interrupts = <0x1 0x10 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+ device_type = "rtc";
+ reg = <0x800 0x100>;
+ interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ can@900 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ cell-index = <0>;
+ interrupts = <0x2 0x11 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ reg = <0x900 0x80>;
+ };
+
+ can@980 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ cell-index = <1>;
+ interrupts = <0x2 0x12 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ reg = <0x980 0x80>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <0x1 0x7 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio-wkup@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ spi@f00 {
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ usb@1000 {
+ compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <0x2 0x6 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ dma-controller@1200 {
+ device_type = "dma-controller";
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0
+ 0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0
+ 0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0
+ 0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ ac97@2000 { /* PSC1 in ac97 mode */
+ device_type = "sound";
+ compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
+ cell-index = <0>;
+ reg = <0x2000 0x100>;
+ interrupts = <0x2 0x2 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ /* PSC2 port is used by CAN1/2 */
+
+ serial@2400 { /* PSC3 in UART mode */
+ device_type = "serial";
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ port-number = <0>;
+ cell-index = <2>;
+ reg = <0x2400 0x100>;
+ interrupts = <0x2 0x3 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ /* PSC4 is ??? */
+
+ /* PSC5 is ??? */
+
+ serial@2c00 { /* PSC6 in UART mode */
+ device_type = "serial";
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ port-number = <1>;
+ cell-index = <5>;
+ reg = <0x2c00 0x100>;
+ interrupts = <0x2 0x4 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [00 00 00 00 00 00];
+ interrupts = <0x2 0x5 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */
+ interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0:ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0x0>;
+ };
+ };
+
+ ata@3a00 {
+ device_type = "ata";
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <0x2 0x7 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ cell-index = <0>;
+ reg = <0x3d00 0x40>;
+ interrupts = <0x2 0xf 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ cell-index = <1>;
+ reg = <0x3d40 0x40>;
+ interrupts = <0x2 0x10 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ rtc@51 {
+ device_type = "rtc";
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ /* FIXME: EEPROM */
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
+ reg = <0x8000 0x4000>;
+ };
+
+ /* This is only an example device to show the usage of gpios. It maps all available
+ * gpios to the "gpio-provider" device.
+ */
+ gpio {
+ compatible = "gpio-provider";
+
+ /* mpc52xx exp.con patchfield */
+ gpios = <&gpio_wkup 0 0 /* GPIO_WKUP_7 11d jp13-3 */
+ &gpio_wkup 1 0 /* GPIO_WKUP_6 14c */
+ &gpio_wkup 6 0 /* PSC2_4 43c x5-11 */
+ &gpio_simple 2 0 /* IRDA_1 24c x7-6 set GPS_PORT_CONFIG[IRDA] = 0 */
+ &gpio_simple 3 0 /* IRDA_0 x8-5 set GPS_PORT_CONFIG[IRDA] = 0 */
+ &gpt2 0 0 /* timer2 12d x4-4 */
+ &gpt3 0 0 /* timer3 13d x6-4 */
+ &gpt4 0 0 /* timer4 61c x2-16 */
+ &gpt5 0 0 /* timer5 44c x7-11 */
+ &gpt6 0 0 /* timer6 60c x8-15 */
+ &gpt7 0 0 /* timer7 36a x17-9 */
+ >;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */
+ 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3
+ 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3
+ 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3
+
+ 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */
+ 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3
+ 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3
+ 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>;
+ interrupt-parent = <&mpc5200_pic>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>;
+ };
+};
Oops, something went wrong.

0 comments on commit 106757b

Please sign in to comment.