Skip to content
Permalink
Browse files

Merge tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Cannonlake and Vega12 support are probably the two major things. This
  pull lacks nouveau, Ben had some unforseen leave and a few other
  blockers so we'll see how things look or maybe leave it for this merge
  window.

  core:
   - Device links to handle sound/gpu pm dependency
   - Color encoding/range properties
   - Plane clipping into plane check helper
   - Backlight helpers
   - DP TP4 + HBR3 helper support

  amdgpu:
   - Vega12 support
   - Enable DC by default on all supported GPUs
   - Powerplay restructuring and cleanup
   - DC bandwidth calc updates
   - DC backlight on pre-DCE11
   - TTM backing store dropping support
   - SR-IOV fixes
   - Adding "wattman" like functionality
   - DC crc support
   - Improved DC dual-link handling

  amdkfd:
   - GPUVM support for dGPU
   - KFD events for dGPU
   - Enable PCIe atomics for dGPUs
   - HSA process eviction support
   - Live-lock fixes for process eviction
   - VM page table allocation fix for large-bar systems

  panel:
   - Raydium RM68200
   - AUO G104SN02 V2
   - KEO TX31D200VM0BAA
   - ARM Versatile panels

  i915:
   - Cannonlake support enabled
   - AUX-F port support added
   - Icelake base enabling until internal milestone of forcewake support
   - Query uAPI interface (used for GPU topology information currently)
   - Compressed framebuffer support for sprites
   - kmem cache shrinking when GPU is idle
   - Avoid boosting GPU when waited item is being processed already
   - Avoid retraining LSPCON link unnecessarily
   - Decrease request signaling latency
   - Deprecation of I915_SET_COLORKEY_NONE
   - Kerneldoc and compiler warning cleanup for upcoming CI enforcements
   - Full range ycbcr toggling
   - HDCP support

  i915/gvt:
   - Big refactor for shadow ppgtt
   - KBL context save/restore via LRI cmd (Weinan)
   - Properly unmap dma for guest page (Changbin)

  vmwgfx:
   - Lots of various improvements

  etnaviv:
   - Use the drm gpu scheduler
   - prep work for GC7000L support

  vc4:
   - fix alpha blending
   - Expose perf counters to userspace

  pl111:
   - Bandwidth checking/limiting
   - Versatile panel support

  sun4i:
   - A83T HDMI support
   - A80 support
   - YUV plane support
   - H3/H5 HDMI support

  omapdrm:
   - HPD support for DVI connector
   - remove lots of static variables

  msm:
   - DSI updates from 10nm / SDM845
   - fix for race condition with a3xx/a4xx fence completion irq
   - some refactoring/prep work for eventual a6xx support (ie. when we
     have a userspace)
   - a5xx debugfs enhancements
   - some mdp5 fixes/cleanups to prepare for eventually merging
     writeback
   - support (ie. when we have a userspace)

  tegra:
   - mmap() fixes for fbdev devices
   - Overlay plane for hw cursor fix
   - dma-buf cache maintenance support

  mali-dp:
   - YUV->RGB conversion support

  rockchip:
   - rk3399/chromebook fixes and improvements

  rcar-du:
   - LVDS support move to drm bridge
   - DT bindings for R8A77995
   - Driver/DT support for R8A77970

  tilcdc:
   - DRM panel support"

* tag 'drm-for-v4.17' of git://people.freedesktop.org/~airlied/linux: (1646 commits)
  drm/i915: Fix hibernation with ACPI S0 target state
  drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
  drm/i915: Specify which engines to reset following semaphore/event lockups
  drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
  drm/amdkfd: Use ordered workqueue to restore processes
  drm/amdgpu: Fix acquiring VM on large-BAR systems
  drm/amd/pp: clean header file hwmgr.h
  drm/amd/pp: use mlck_table.count for array loop index limit
  drm: Fix uabi regression by allowing garbage mode->type from userspace
  drm/amdgpu: Add an ATPX quirk for hybrid laptop
  drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
  drm/amd/pp: Add new asic support in pp_psm.c
  drm/amd/pp: Clean up powerplay code on Vega12
  drm/amd/pp: Add smu irq handlers for legacy asics
  drm/amd/pp: Fix set wrong temperature range on smu7
  drm/amdgpu: Don't change preferred domian when fallback GTT v5
  drm/vmwgfx: Bump version patchlevel and date
  drm/vmwgfx: use monotonic event timestamps
  drm/vmwgfx: Unpin the screen object backup buffer when not used
  drm/vmwgfx: Stricter count of legacy surface device resources
  ...
  • Loading branch information...
torvalds committed Apr 2, 2018
2 parents 0adb328 + 694f54f commit 320b164abb32db876866a4ff8c2cb710524ac6ea
Showing 1,062 changed files with 144,461 additions and 38,059 deletions.
@@ -0,0 +1,58 @@
Renesas R-Car LVDS Encoder
==========================

These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
Gen2, R-Car Gen3 and RZ/G SoCs.

Required properties:

- compatible : Shall contain one of
- "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
- "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
- "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
- "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
- "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
- "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
- "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders
- "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders

- reg: Base address and length for the memory-mapped registers
- clocks: A phandle + clock-specifier pair for the functional clock
- resets: A phandle + reset specifier for the module reset

Required nodes:

The LVDS encoder has two video ports. Their connections are modelled using the
OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.

- Video port 0 corresponds to the parallel RGB input
- Video port 1 corresponds to the LVDS output

Each port shall have a single endpoint.


Example:

lvds0: lvds@feb90000 {
compatible = "renesas,r8a7790-lvds";
reg = <0 0xfeb90000 0 0x1c>;
clocks = <&cpg CPG_MOD 726>;
resets = <&cpg 726>;

ports {
#address-cells = <1>;
#size-cells = <0>;

port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&du_out_lvds0>;
};
};
port@1 {
reg = <1>;
lvds0_out: endpoint {
};
};
};
};
@@ -1,11 +1,16 @@
THS8135 Video DAC
-----------------
THS8134 and THS8135 Video DAC
-----------------------------

This is the binding for Texas Instruments THS8135 Video DAC bridge.
This is the binding for Texas Instruments THS8134, THS8134A, THS8134B and
THS8135 Video DAC bridges.

Required properties:

- compatible: Must be "ti,ths8135"
- compatible: Must be one of
"ti,ths8134"
"ti,ths8134a," "ti,ths8134"
"ti,ths8134b", "ti,ths8134"
"ti,ths8135"

Required nodes:

@@ -10,6 +10,7 @@ Optional properties:
- analog: the connector has DVI analog pins
- digital: the connector has DVI digital pins
- dual-link: the connector has pins for DVI dual-link
- hpd-gpios: HPD GPIO number

Required nodes:
- Video port for DVI input
@@ -1,23 +1,3 @@
Etnaviv DRM master device
=========================

The Etnaviv DRM master device is a virtual device needed to list all
Vivante GPU cores that comprise the GPU subsystem.

Required properties:
- compatible: Should be one of
"fsl,imx-gpu-subsystem"
"marvell,dove-gpu-subsystem"
- cores: Should contain a list of phandles pointing to Vivante GPU devices

example:

gpu-subsystem {
compatible = "fsl,imx-gpu-subsystem";
cores = <&gpu_2d>, <&gpu_3d>;
};


Vivante GPU core devices
========================

@@ -32,7 +12,9 @@ Required properties:
- clocks: should contain one clock for entry in clock-names
see Documentation/devicetree/bindings/clock/clock-bindings.txt
- clock-names:
- "bus": AXI/register clock
- "bus": AXI/master interface clock
- "reg": AHB/slave interface clock
(only required if GPU can gate slave interface independently)
- "core": GPU core clock
- "shader": Shader clock (only required if GPU has feature PIPE_3D)

@@ -7,8 +7,6 @@ Required properties:
- reg: Physical base address and length of the registers of controller
- reg-names: The names of register regions. The following regions are required:
* "dsi_ctrl"
- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
be 0 or 1, since we have 2 DSI controllers at most for now.
- interrupts: The interrupt signal from the DSI block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks.
@@ -22,6 +20,8 @@ Required properties:
* "core"
For DSIv2, we need an additional clock:
* "src"
For DSI6G v2.0 onwards, we need also need the clock:
* "byte_intf"
- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
by a DSI PHY block. See [1] for details on clock bindings.
@@ -88,21 +88,35 @@ Required properties:
* "qcom,dsi-phy-28nm-lp"
* "qcom,dsi-phy-20nm"
* "qcom,dsi-phy-28nm-8960"
- reg: Physical base address and length of the registers of PLL, PHY and PHY
regulator
* "qcom,dsi-phy-14nm"
* "qcom,dsi-phy-10nm"
- reg: Physical base address and length of the registers of PLL, PHY. Some
revisions require the PHY regulator base address, whereas others require the
PHY lane base address. See below for each PHY revision.
- reg-names: The names of register regions. The following regions are required:
For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
* "dsi_pll"
* "dsi_phy"
* "dsi_phy_regulator"
For DSI 14nm and 10nm PHYs:
* "dsi_pll"
* "dsi_phy"
* "dsi_phy_lane"
- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
2 clocks: A byte clock (index 0), and a pixel clock (index 1).
- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
be 0 or 1, since we have 2 DSI PHYs at most for now.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks. See [1] for details on clock bindings.
- clock-names: the following clocks are required:
* "iface"
For 28nm HPM/LP, 28nm 8960 PHYs:
- vddio-supply: phandle to vdd-io regulator device node
For 20nm PHY:
- vddio-supply: phandle to vdd-io regulator device node
- vcca-supply: phandle to vcca regulator device node
For 14nm PHY:
- vcca-supply: phandle to vcca regulator device node
For 10nm PHY:
- vdds-supply: phandle to vdds regulator device node

Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
@@ -0,0 +1,31 @@
ARM Versatile TFT Panels

These panels are connected to the daughterboards found on the
ARM Versatile reference designs.

This device node must appear as a child to a "syscon"-compatible
node.

Required properties:
- compatible: should be "arm,versatile-tft-panel"

Required subnodes:
- port: see display/panel/panel-common.txt, graph.txt


Example:

sysreg@0 {
compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
reg = <0x00000 0x1000>;

panel: display@0 {
compatible = "arm,versatile-tft-panel";

port {
panel_in: endpoint {
remote-endpoint = <&foo>;
};
};
};
};
@@ -0,0 +1,12 @@
AU Optronics Corporation 10.4" (800x600) color TFT LCD panel

Required properties:
- compatible: should be "auo,g104sn02"
- power-supply: as specified in the base binding

Optional properties:
- backlight: as specified in the base binding
- enable-gpios: as specified in the base binding

This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
@@ -80,6 +80,11 @@ The parameters are defined as:
| | v | | |
+----------+-------------------------------------+----------+-------+

Note: In addition to being used as subnode(s) of display-timings, the timing
subnode may also be used on its own. This is appropriate if only one mode
need be conveyed. In this case, the node should be named 'panel-timing'.


Example:

display-timings {
@@ -0,0 +1,25 @@
Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel

This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

Required properties:
- compatible: should be "koe,tx31d200vm0baa"

Optional properties:
- backlight: phandle of the backlight device attached to the panel

Optional nodes:
- Video port for LVDS panel input.

Example:
panel {
compatible = "koe,tx31d200vm0baa";
backlight = <&backlight_lvds>;

port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
@@ -9,6 +9,7 @@ Required properties:

Optional properties:
- reset-gpios: a GPIO spec for the reset pin (active low).
- power-supply: phandle of the regulator that provides the supply voltage.

Example:
&dsi {
@@ -17,5 +18,6 @@ Example:
compatible = "orisetech,otm8009a";
reg = <0>;
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
power-supply = <&v1v8>;
};
};
@@ -0,0 +1,25 @@
Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel

The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
panel connected using a MIPI-DSI video interface.

Required properties:
- compatible: "raydium,rm68200"
- reg: the virtual channel number of a DSI peripheral

Optional properties:
- reset-gpios: a GPIO spec for the reset pin (active low).
- power-supply: phandle of the regulator that provides the supply voltage.
- backlight: phandle of the backlight device attached to the panel.

Example:
&dsi {
...
panel@0 {
compatible = "raydium,rm68200";
reg = <0>;
reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
power-supply = <&v1v8>;
backlight = <&pwm_backlight>;
};
};
@@ -1,4 +1,8 @@
Simple display panel
====================

panel node
----------

Required properties:
- power-supply: See panel-common.txt
@@ -13,13 +13,10 @@ Required Properties:
- "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
- "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
- "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
- "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
- "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU

- reg: A list of base address and length of each memory resource, one for
each entry in the reg-names property.
- reg-names: Name of the memory resources. The DU requires one memory
resource for the DU core (named "du") and one memory resource for each
LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
index).
- reg: the memory-mapped I/O registers base address and length

- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifiers for the DU interrupts.
@@ -29,14 +26,13 @@ Required Properties:
- clock-names: Name of the clocks. This property is model-dependent.
- R8A7779 uses a single functional clock. The clock doesn't need to be
named.
- All other DU instances use one functional clock per channel and one
clock per LVDS encoder (if available). The functional clocks must be
named "du.x" with "x" being the channel numerical index. The LVDS clocks
must be named "lvds.x" with "x" being the LVDS encoder numerical index.
- In addition to the functional and encoder clocks, all DU versions also
support externally supplied pixel clocks. Those clocks are optional.
When supplied they must be named "dclkin.x" with "x" being the input
clock numerical index.
- All other DU instances use one functional clock per channel The
functional clocks must be named "du.x" with "x" being the channel
numerical index.
- In addition to the functional clocks, all DU versions also support
externally supplied pixel clocks. Those clocks are optional. When
supplied they must be named "dclkin.x" with "x" being the input clock
numerical index.

- vsps: A list of phandle and channel index tuples to the VSPs that handle
the memory interfaces for the DU channels. The phandle identifies the VSP
@@ -63,25 +59,24 @@ corresponding to each DU output.
R8A7794 (R-Car E2) DPAD 0 DPAD 1 - -
R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0
R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 -
R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - -
R8A77995 (R-Car D3) DPAD 0 LVDS 0 LVDS 1 -


Example: R8A7795 (R-Car H3) ES2.0 DU

du: display@feb00000 {
compatible = "renesas,du-r8a7795";
reg = <0 0xfeb00000 0 0x80000>,
<0 0xfeb90000 0 0x14>;
reg-names = "du", "lvds.0";
reg = <0 0xfeb00000 0 0x80000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
<&cpg CPG_MOD 727>;
clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
<&cpg CPG_MOD 721>;
clock-names = "du.0", "du.1", "du.2", "du.3";
vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;

ports {
Oops, something went wrong.

1 comment on commit 320b164

@tuxutku

This comment has been minimized.

Copy link

commented on 320b164 Oct 10, 2018

Please sign in to comment.
You can’t perform that action at this time.