Commits on May 20, 2012
  1. Linux 3.4

    committed May 20, 2012
Commits on May 19, 2012
  1. Merge tag 'parisc-fixes' of git://…

    Pull PA-RISC fixes from James Bottomley:
     "This is a set of three bug fixes that gets parisc running again on
      systems with PA1.1 processors.
      Two fix regressions introduced in 2.6.39 and one fixes a prefetch bug
      that only affects PA7300LC processors.  We also have another pending
      fix to do with the sectional arrangement of, but there's a
      query on it during testing on one particular system type, so I'll hold
      off sending it in for now."
    * tag 'parisc-fixes' of git://
      [PARISC] fix panic on prefetch(NULL) on PA7300LC
      [PARISC] fix crash in flush_icache_page_asm on PA1.1
      [PARISC] fix PA1.1 oops on boot
    committed May 19, 2012
  2. Merge branch 'x86/ld-fix' of git://…

    Pull x86 linker bug workarounds from Peter Anvin.
    GNU ld-[12] (*) has an unfortunate bug where it incorrectly
    turns certain relocation entries absolute.  Section-relative symbols
    that are part of otherwise empty sections are silently changed them to
    absolute.  We rely on section-relative symbols staying section-relative,
    and actually have several sections in the linker script solely for this
    See for example
    We could just black-list the buggy linker, but it appears that it got
    shipped in at least F17, and possibly other distros too, so it's sadly
    not some rare unusual case.
    This backports the workaround from the x86/trampoline branch, and as
    Peter says: "This is not a minimal fix, not at all, but it is a tested
    code base."
    * 'x86/ld-fix' of git://
      x86, relocs: When printing an error, say relative or absolute
      x86, relocs: Workaround for binutils section bug
      x86, realmode: 16-bit real-mode code support for relocs tool
    (*) That's a manly release numbering system. Stupid, sure. But manly.
    committed May 19, 2012
  3. Merge branch 'for-linus' of git://

    Pull block layer fixes from Jens Axboe:
     "A few small, but important fixes.  Most of them are marked for stable
      as well
       - Fix failure to release a semaphore on error path in mtip32xx.
       - Fix crashable condition in bio_get_nr_vecs().
       - Don't mark end-of-disk buffers as mapped, limit it to i_size.
       - Fix for build problem with CONFIG_BLOCK=n on arm at least.
       - Fix for a buffer overlow on UUID partition printing.
       - Trivial removal of unused variables in dac960."
    * 'for-linus' of git://
      block: fix buffer overflow when printing partition UUIDs
      Fix blkdev.h build errors when BLOCK=n
      bio allocation failure due to bio_get_nr_vecs()
      block: don't mark buffers beyond end of disk as mapped
      mtip32xx: release the semaphore on an error path
      dac960: Remove unused variables from DAC960_CreateProcEntries()
    committed May 19, 2012
  4. Merge git://

    Pull one more networking bug-fix from David Miller:
     "One last straggler.
      Eric Dumazet's pktgen unload oops fix was not entirely complete, but
      all the cases should be handled properly now....  fingers crossed."
    * git://
      pktgen: fix module unload for good
    committed May 19, 2012
  5. memcg,thp: fix res_counter:96 regression

    Occasionally, testing memcg's move_charge_at_immigrate on rc7 shows
    a flurry of hundreds of warnings at kernel/res_counter.c:96, where
    res_counter_uncharge_locked() does WARN_ON(counter->usage < val).
    The first trace of each flurry implicates __mem_cgroup_cancel_charge()
    of mc.precharge, and an audit of mc.precharge handling points to
    mem_cgroup_move_charge_pte_range()'s THP handling in commit 1272485
    ("memcg: avoid THP split in task migration").
    Checking !mc.precharge is good everywhere else, when a single page is to
    be charged; but here the "mc.precharge -= HPAGE_PMD_NR" likely to
    follow, is liable to result in underflow (a lot can change since the
    precharge was estimated).
    Simply check against HPAGE_PMD_NR: there's probably a better
    alternative, trying precharge for more, splitting if unsuccessful; but
    this one-liner is safer for now - no kernel/res_counter.c:96 warnings
    seen in 26 hours.
    Signed-off-by: Hugh Dickins <>
    Signed-off-by: Linus Torvalds <>
    Hugh Dickins committed with May 18, 2012
  6. x86, relocs: When printing an error, say relative or absolute

    When the relocs tool throws an error, let the error message say if it
    is an absolute or relative symbol.  This should make it a lot more
    clear what action the programmer needs to take and should help us find
    the reason if additional symbol bugs show up.
    Signed-off-by: H. Peter Anvin <>
    Cc: <>
    H. Peter Anvin committed May 18, 2012
  7. x86, relocs: Workaround for binutils section bug

    GNU ld has a bug that it blindly changes symbols from
    section-relative to absolute if they are in a section of zero length.
    This turns the symbols __init_begin and __init_end into absolute
    symbols.  Let the relocs program know that those should be treated as
    relative symbols.
    Reported-by: Ingo Molnar <>
    Signed-off-by: H. Peter Anvin <>
    Cc: H.J. Lu <>
    Cc: <>
    Cc: Jarkko Sakkinen <>
    H. Peter Anvin committed May 18, 2012
  8. x86, realmode: 16-bit real-mode code support for relocs tool

    A new option is added to the relocs tool called '--realmode'.
    This option causes the generation of 16-bit segment relocations
    and 32-bit linear relocations for the real-mode code. When
    the real-mode code is moved to the low-memory during kernel
    initialization, these relocation entries can be used to
    relocate the code properly.
    In the assembly code 16-bit segment relocations must be relative
    to the 'real_mode_seg' absolute symbol. Linear relocations must be
    relative to a symbol prefixed with 'pa_'.
    16-bit segment relocation is used to load cs:ip in 16-bit code.
    Linear relocations are used in the 32-bit code for relocatable
    data references. They are declared in the linker script of the
    real-mode code.
    The relocs tool is moved to arch/x86/tools/relocs.c, and added new
    target archscripts that can be used to build scripts needed building
    an architecture.  be compiled before building the arch/x86 tree.
    [ hpa: accelerating this because it detects invalid absolute
      relocations, a serious bug in binutils which currently
      produces bad kernels. ]
    Signed-off-by: H. Peter Anvin <>
    Signed-off-by: Jarkko Sakkinen <>
    Signed-off-by: H. Peter Anvin <>
    Cc: <>
    H. Peter Anvin committed May 8, 2012
  9. Merge tag 'dm-3.4-fixes-2' of git://…

    Pull a dm fix from Alasdair G Kergon:
     "A fix to the thin provisioning userspace interface."
    * tag 'dm-3.4-fixes-2' of git://
      dm thin: fix table output when pool target disables discard passdown internally
    committed May 19, 2012
  10. dm thin: fix table output when pool target disables discard passdown …

    When the thin pool target clears the discard_passdown parameter
    internally, it incorrectly changes the table line reported to userspace.
    This breaks dumb string comparisons on these table lines in generic
    userspace device-mapper library code and leads to tables being reloaded
    repeatedly when nothing is actually meant to be changing.
    This patch corrects this by no longer changing the table line when
    discard passdown was disabled.
    We can still tell when discard passdown is overridden by looking for the
    message "Discard unsupported by data device (sdX): Disabling discard passdown."
    This automatic detection is also moved from the 'load' to the 'resume'
    so that it is re-evaluated should the properties of underlying devices
    Signed-off-by: Mike Snitzer <>
    Acked-by: Joe Thornber <>
    Signed-off-by: Alasdair G Kergon <>
    snitm committed with kergon May 19, 2012
Commits on May 18, 2012
  1. Merge tag 'md-3.4-fixes' of git://

    Pull one more md bugfix from NeilBrown:
     "Fix bug in recent fix to RAID10.
      Without this patch, recovery will crash"
    * tag 'md-3.4-fixes' of git://
      md/raid10: fix transcription error in calc_sectors conversion.
    committed May 18, 2012
  2. Merge branch 'stable' of git://…

    Pull tile tree bugfix from Chris Metcalf:
     "This fixes a security vulnerability (and correctness bug) in tilegx"
    * 'stable' of git://
      tilegx: enable SYSCALL_WRAPPERS support
    committed May 18, 2012
  3. md/raid10: fix transcription error in calc_sectors conversion.

    The old code was
    		sector_div(stride, fc);
    the new code was
    		sector_dir(size, conf->near_copies);
    'size' is right (the stride various wasn't really needed), but
    'fc' means 'far_copies', and that is an important difference.
    Signed-off-by: NeilBrown <>
    neilbrown committed May 18, 2012
  4. Merge branch 'akpm' (Andrew's patch-bomb)

    Merge misc fixes from Andrew Morton.
    * emailed from Andrew Morton <>: (4 patches)
      frv: delete incorrect task prototypes causing compile fail
      slub: missing test for partial pages flush work in flush_all()
      fs, proc: fix ABBA deadlock in case of execution attempt of map_files/ entries
      drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01
    committed May 18, 2012
  5. proc: move fd symlink i_mode calculations into tid_fd_revalidate()

    Instead of doing the i_mode calculations at proc_fd_instantiate() time,
    move them into tid_fd_revalidate(), which is where the other inode state
    (notably uid/gid information) is updated too.
    Otherwise we'll end up with stale i_mode information if an fd is re-used
    while the dentry still hangs around.  Not that anything really *cares*
    (symlink permissions don't really matter), but Tetsuo Handa noticed that
    the owner read/write bits don't always match the state of the
    readability of the file descriptor, and we _used_ to get this right a
    long time ago in a galaxy far, far away.
    Besides, aside from fixing an ugly detail (that has apparently been this
    way since commit 61a2878: "proc: Remove the hard coded inode
    numbers" in 2006), this removes more lines of code than it adds.  And it
    just makes sense to update i_mode in the same place we update i_uid/gid.
    Al Viro correctly points out that we could just do the inode fill in the
    inode iops ->getattr() function instead.  However, that does require
    somewhat slightly more invasive changes, and adds yet *another* lookup
    of the file descriptor.  We need to do the revalidate() for other
    reasons anyway, and have the file descriptor handy, so we might as well
    fill in the information at this point.
    Reported-by: Tetsuo Handa <>
    Cc: Al Viro <>
    Acked-by: Eric Biederman <>
    Signed-off-by: Linus Torvalds <>
    committed May 18, 2012
  6. pktgen: fix module unload for good

    commit c57b546 (pktgen: fix crash at module unload) did a very poor
    job with list primitives.
    1) list_splice() arguments were in the wrong order
    2) list_splice(list, head) has undefined behavior if head is not
    3) We should use the list_splice_init() variant to clear pktgen_threads
    Signed-off-by: Eric Dumazet <>
    Signed-off-by: David S. Miller <>
    Eric Dumazet committed with davem330 May 17, 2012
  7. tilegx: enable SYSCALL_WRAPPERS support

    Some discussion with the glibc mailing lists revealed that this was
    necessary for 64-bit platforms with MIPS-like sign-extension rules
    for 32-bit values.  The original symptom was that passing (uid_t)-1 to
    setreuid() was failing in programs linked -pthread because of the "setxid"
    mechanism for passing setxid-type function arguments to the syscall code.
    SYSCALL_WRAPPERS handles ensuring that all syscall arguments end up with
    proper sign-extension and is thus the appropriate fix for this problem.
    On other platforms (s390, powerpc, sparc64, and mips) this was fixed
    in  The general issue is tracked as CVE-2009-0029.
    Cc: <>
    Signed-off-by: Chris Metcalf <>
    cmetcalf-tilera committed May 18, 2012
  8. Merge tag 'linus-mce-fix' of git://…

    Pull a machine check recovery fix from Tony Luck.
    I really don't like how the MCE code does some of the things it does,
    but this does seem to be an improvement.
    * tag 'linus-mce-fix' of git://
      x86/mce: Only restart instruction after machine check recovery if it is safe
    committed May 18, 2012
  9. frv: delete incorrect task prototypes causing compile fail

    Commit 4110180 ("fork: Provide weak arch_release_[task_struct|
    thread_info] functions") in -tip highlights a problem in the frv arch,
    where it has needles prototypes for alloc_task_struct_node and
    free_task_struct.  This now shows up as:
      kernel/fork.c:120:66: error: static declaration of 'alloc_task_struct_node' follows non-static declaration
      kernel/fork.c:127:51: error: static declaration of 'free_task_struct' follows non-static declaration
    since that commit turned them into real functions.  Since arch/frv does
    does not define define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR (i.e.  it just
    uses the generic ones) it shouldn't list these at all.
    Signed-off-by: Paul Gortmaker <>
    Cc: David Howells <>
    Cc: Thomas Gleixner <>
    Signed-off-by: Andrew Morton <>
    Signed-off-by: Linus Torvalds <>
    paulgortmaker committed with May 18, 2012
  10. slub: missing test for partial pages flush work in flush_all()

    I found some kernel messages such as:
        SLUB raid5-md127: kmem_cache_destroy called for cache that still has objects.
        Pid: 6143, comm: mdadm Tainted: G           O 3.4.0-rc6+        #75
        Call Trace:
        free_conf+0x2d/0xf0 [raid456]
        stop+0x41/0x60 [raid456]
        md_stop+0x1a/0x60 [md_mod]
        do_md_stop+0x74/0x470 [md_mod]
        md_ioctl+0xff/0x11f0 [md_mod]
    Then using kmemleak I found these messages:
        unreferenced object 0xffff8800b6db7380 (size 112):
          comm "mdadm", pid 5783, jiffies 4294810749 (age 90.589s)
          hex dump (first 32 bytes):
            01 01 db b6 ad 4e ad de ff ff ff ff ff ff ff ff  .....N..........
            ff ff ff ff ff ff ff ff 98 40 4a 82 ff ff ff ff  .........@J.....
            setup_conf+0x649/0x770 [raid456]
            run+0x68b/0x840 [raid456]
            md_run+0x529/0x940 [md_mod]
            do_md_run+0x18/0xc0 [md_mod]
            md_ioctl+0xba8/0x11f0 [md_mod]
    This bug was introduced by commit a8364d5 ("slub: only IPI CPUs that
    have per cpu obj to flush"), which did not include checks for per cpu
    partial pages being present on a cpu.
    Signed-off-by: majianpeng <>
    Cc: Gilad Ben-Yossef <>
    Acked-by: Christoph Lameter <>
    Cc: Pekka Enberg <>
    Tested-by: Jeff Layton <>
    Signed-off-by: Andrew Morton <>
    Signed-off-by: Linus Torvalds <>
    majianpeng committed with May 18, 2012
  11. fs, proc: fix ABBA deadlock in case of execution attempt of map_files…

    …/ entries
    map_files/ entries are never supposed to be executed, still curious
    minds might try to run them, which leads to the following deadlock
      [ INFO: possible circular locking dependency detected ]
      3.4.0-rc4-24406-g841e6a6 #121 Not tainted
      bash/1556 is trying to acquire lock:
       (&sb->s_type->i_mutex_key#8){+.+.+.}, at: do_lookup+0x267/0x2b1
      but task is already holding lock:
       (&sig->cred_guard_mutex){+.+.+.}, at: prepare_bprm_creds+0x2d/0x69
      which lock already depends on the new lock.
      the existing dependency chain (in reverse order) is:
      -> #1 (&sig->cred_guard_mutex){+.+.+.}:
      -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}:
    This is because prepare_bprm_creds grabs task->signal->cred_guard_mutex
    and when do_lookup happens we try to grab task->signal->cred_guard_mutex
    again in lock_trace.
    Fix it using plain ptrace_may_access() helper in proc_map_files_lookup()
    and in proc_map_files_readdir() instead of lock_trace(), the caller must
    be CAP_SYS_ADMIN granted anyway.
    Signed-off-by: Cyrill Gorcunov <>
    Reported-by: Sasha Levin <>
    Cc: Konstantin Khlebnikov <>
    Cc: Pavel Emelyanov <>
    Cc: Dave Jones <>
    Cc: Vasiliy Kulikov <>
    Cc: Oleg Nesterov <>
    Signed-off-by: Andrew Morton <>
    Signed-off-by: Linus Torvalds <>
    cyrillos committed with May 18, 2012
  12. drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01

    The reset date of the ST Micro version of PL031 is 2000-01-01.  The
    correct weekday for 2000-01-01 is saturday, but pl031 is initialized to
    sunday.  This may lead to alarm malfunction, so configure the correct
    wday if RTC_DR indicates reset.
    Signed-off-by: Rajkumar Kasirajan <>
    Signed-off-by: Linus Walleij <>
    Cc: Mattias Wallin <>
    Cc: Alessandro Zummo <>
    Signed-off-by: Andrew Morton <>
    Signed-off-by: Linus Torvalds <>
    Rajkumar Kasirajan committed with May 18, 2012
Commits on May 17, 2012
  1. Merge branch 'fixes' of git://

    Pull ARM fixes from Russell King:
     "Small set of fixes again."
    * 'fixes' of git://
      ARM: 7419/1: vfp: fix VFP flushing regression on sigreturn path
      ARM: 7418/1: LPAE: fix access flag setup in mem_type_table
      ARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESS
      ARM: 7417/1: vfp: ensure preemption is disabled when enabling VFP access
    committed May 17, 2012
  2. Merge git://

    Pull two networking fixes from David S. Miller:
    1) Thanks to Willy Tarreau and Eric Dumazet, we've unlocked a bug that's
       been present in do_tcp_sendpages() since that function was written in
       When we block to wait for memory we have to unconditionally try and
       push out pending TCP data, otherwise we can block for an unreasonably
       long amount of time.
    2) Fix deadlock in e1000, fixes kernel bugzilla 43132
       From Tushar Dave.
    * git://
      e1000: Prevent reset task killing itself.
      tcp: do_tcp_sendpages() must try to push data out on oom conditions
    committed May 17, 2012
  3. ACPI / PCI / PM: Fix device PM regression related to D3hot/D3cold

    Commit 1cc0c99 ("ACPI: Fix D3hot v D3cold confusion") introduced a
    bug in __acpi_bus_set_power() and changed the behavior of
    acpi_pci_set_power_state() in such a way that it generally doesn't work
    as expected if PCI_D3hot is passed to it as the second argument.
    First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to
    __acpi_bus_set_power() and the explicit_set flag is set for the D3cold
    state, the function will try to execute AML method called "_PS4", which
    doesn't exist.
    Fix this by adding a check to ensure that the name of the AML method
    to execute for transitions to ACPI_STATE_D3_COLD is correct in
    __acpi_bus_set_power().  Also make sure that the explicit_set flag
    for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify
    acpi_power_transition() to avoid accessing power resources for
    ACPI_STATE_D3_COLD, because they don't exist.
    Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the
    target state, the function will request a transition to
    ACPI_STATE_D3_HOT instead of ACPI_STATE_D3.  However,
    ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML
    method is defined for the given device, which is rare.  This causes
    problems to happen on systems where devices were successfully put
    into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work
    now.  In particular, some unused graphics adapters are not turned
    off as a result.
    To fix this issue restore the old behavior of
    acpi_pci_set_power_state(), which is to request a transition to
    ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or
    PCI_D3cold is passed to it as the argument.
    This approach is not ideal, because generally power should not
    be removed from devices if PCI_D3hot is the target power state,
    but since this behavior is relied on, we have no choice but to
    restore it at the moment and spend more time on designing a
    better solution in the future.
    Reported-by: rocko <>
    Reported-by: Cristian Rodríguez <>
    Reported-and-tested-by: Peter <>
    Signed-off-by: Rafael J. Wysocki <>
    Signed-off-by: Linus Torvalds <>
    rjwysocki committed with May 17, 2012
  4. e1000: Prevent reset task killing itself.

    Killing reset task while adapter is resetting causes deadlock.
    Only kill reset task if adapter is not resetting.
    Ref bug #43132 on
    Signed-off-by: Tushar Dave <>
    Tested-by: Aaron Brown <>
    Signed-off-by: Jeff Kirsher <>
    Signed-off-by: David S. Miller <>
    Tushar Dave committed with davem330 May 17, 2012
  5. tcp: do_tcp_sendpages() must try to push data out on oom conditions

    Since recent changes on TCP splicing (starting with commits 2f53384
    "tcp: allow splice() to build full TSO packets" and 35f9c09 "tcp:
    tcp_sendpages() should call tcp_push() once"), I started seeing
    massive stalls when forwarding traffic between two sockets using
    splice() when pipe buffers were larger than socket buffers.
    Latest changes (net: netdev_alloc_skb() use build_skb()) made the
    problem even more apparent.
    The reason seems to be that if do_tcp_sendpages() fails on out of memory
    condition without being able to send at least one byte, tcp_push() is not
    called and the buffers cannot be flushed.
    After applying the attached patch, I cannot reproduce the stalls at all
    and the data rate it perfectly stable and steady under any condition
    which previously caused the problem to be permanent.
    The issue seems to have been there since before the kernel migrated to
    git, which makes me think that the stalls I occasionally experienced
    with tux during stress-tests years ago were probably related to the
    same issue.
    This issue was first encountered on 3.0.31 and 3.2.17, so please backport
    to -stable.
    Signed-off-by: Willy Tarreau <>
    Acked-by: Eric Dumazet <>
    Cc: <>
    Willy Tarreau committed with davem330 May 17, 2012
  6. Merge branch '3.4-urgent' of git://…

    Pull two more target-core updates from Nicholas Bellinger:
     "The first patch addresses a SPC-2 reservations RELEASE bug in a
      special (iscsi specific) multi-ISID setup case that was allowing the
      same initiator to be able to incorrect release it's own reservation on
      a different SCSI path with enforce_pr_isid=1 operation.  This bug was
      caught by Bernhard Kohl.
      The second patch is to address a bug with FILEIO backends where the
      incorrect number of blocks for READ_CAPACITY was being reported after
      an underlying device-mapper block_device size change.  This patch uses
      now i_size_read() in fd_get_blocks() for FILEIO backends with an
      underlying block_device, instead of trying to determine this value at
      setup time during fd_create_virtdevice().  (hch CC'ed)
      Both are CC'ed to stable."
    * '3.4-urgent' of git://
      target: Fix bug in handling of FILEIO + block_device resize ops
      target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setups
    committed May 17, 2012
  7. target: Fix bug in handling of FILEIO + block_device resize ops

    This patch fixes a bug in the handling of FILEIO w/ underlying block_device
    resize operations where the original fd_dev->fd_dev_size was incorrectly being
    used in fd_get_blocks() for READ_CAPACITY response payloads.
    This patch avoids using fd_dev->fd_dev_size for FILEIO devices with
    an underlying block_device, and instead changes fd_get_blocks() to
    get the sector count directly from i_size_read() as recommended by hch.
    Reported-by: Christoph Hellwig <>
    Cc: <>
    Signed-off-by: Nicholas Bellinger <>
    nablio3000 committed May 16, 2012
  8. Merge branch 'fixes' of git://

    Pull slave-dmaengine fixes fromVinod Koul:
     "fixes of cylic dma usages in slave dma drivers"
    * 'fixes' of git://
      dmaengine: fix cyclic dma usage
      dmaengine: pl330: dont complete descriptor for cyclic dma
    committed May 17, 2012
  9. Merge tag 'for_linus' of git://…

    Pull last minute virtio fixes from Michael S. Tsirkin:
     "Here are a couple of last minute virtio fixes for 3.4.  Hope it's not
      too late yes - I might have tried too hard to make sure the fix is
      well tested.
      Fixes are by Amit and myself.  One fixes module removal and one
      suspend of a VM, the last one the handling of out of memory condition.
      They are thus very low risk as most people never hit these paths, but
      do fix very annoying problems for people that do use the feature.
      Signed-off-by: Michael S. Tsirkin <>"
    * tag 'for_linus' of git://
      virtio_net: invoke softirqs after __napi_schedule
      virtio: balloon: let host know of updated balloon size before module removal
      virtio: console: tell host of open ports after resume from s3/s4
    committed May 17, 2012
  10. Merge tag 'fixes-for-linus' of git://…

    Pull ARM: SoC fixes from Olof Johansson:
     "I will stop trying to predict when we're done with fixes for a
      Here's another small batch of three patches for arm-soc:
       - A fix for a boot time WARN_ON() due to irq domain conversion on
       - Fix for a regression in Tegra SMP spinup code due to swapped
         register offsets
       - Fixed config dependency for mv_cesa crypto driver to avoid build
    * tag 'fixes-for-linus' of git://
      ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller
      crypto: mv_cesa requires on CRYPTO_HASH to build
      ARM: tegra: Fix flow controller accesses
    committed May 17, 2012
  11. Merge tag 'md-3.4-fixes' of git://

    Pull two md fixes from NeilBrown:
     "One fixes a bug in the new raid10 resize code so is relevant to 3.4
      The other fixes a bug in the use of md by dm-raid, so is relevant to
      any kernel with dm-raid support"
    * tag 'md-3.4-fixes' of git://
      MD: Add del_timer_sync to mddev_suspend (fix nasty panic)
      md/raid10: set dev_sectors properly when resizing devices in array.
    committed May 17, 2012
  12. Merge branches 'perf-urgent-for-linus', 'x86-urgent-for-linus' and 's…

    …ched-urgent-for-linus' of git://
    Pull perf, x86 and scheduler updates from Ingo Molnar.
    * 'perf-urgent-for-linus' of git://
      tracing: Do not enable function event with enable
      perf stat: handle ENXIO error for perf_event_open
      perf: Turn off compiler warnings for flex and bison generated files
      perf stat: Fix case where guest/host monitoring is not supported by kernel
      perf build-id: Fix filename size calculation
    * 'x86-urgent-for-linus' of git://
      x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable
      x86: Fix section annotation of acpi_map_cpu2node()
      x86/microcode: Ensure that module is only loaded on supported Intel CPUs
    * 'sched-urgent-for-linus' of git://
      sched: Fix KVM and ia64 boot crash due to sched_groups circular linked list assumption
    committed May 17, 2012