-
Notifications
You must be signed in to change notification settings - Fork 53k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Pedantic update #389
Pedantic update #389
Conversation
Hi @Li4ick! Thanks for your contribution to the Linux kernel! Linux kernel development happens on mailing lists, rather than on GitHub - this GitHub repository is a read-only mirror that isn't used for accepting contributions. So that your change can become part of Linux, please email it to us as a patch. Sending patches isn't quite as simple as sending a pull request, but fortunately it is a well documented process. Here's what to do:
How do I format my contribution?The Linux kernel community is notoriously picky about how contributions are formatted and sent. Fortunately, they have documented their expectations. Firstly, all contributions need to be formatted as patches. A patch is a plain text document showing the change you want to make to the code, and documenting why it is a good idea. You can create patches with Secondly, patches need 'commit messages', which is the human-friendly documentation explaining what the change is and why it's necessary. Thirdly, changes have some technical requirements. There is a Linux kernel coding style, and there are licensing requirements you need to comply with. Both of these are documented in the Submitting Patches documentation that is part of the kernel. Note that you will almost certainly have to modify your existing git commits to satisfy these requirements. Don't worry: there are many guides on the internet for doing this. Who do I send my contribution to?The Linux kernel is composed of a number of subsystems. These subsystems are maintained by different people, and have different mailing lists where they discuss proposed changes. If you don't already know what subsystem your change belongs to, the
Make sure that your list of recipients includes a mailing list. If you can't find a more specific mailing list, then LKML - the Linux Kernel Mailing List - is the place to send your patches. It's not usually necessary to subscribe to the mailing list before you send the patches, but if you're interested in kernel development, subscribing to a subsystem mailing list is a good idea. (At this point, you probably don't need to subscribe to LKML - it is a very high traffic list with about a thousand messages per day, which is often not useful for beginners.) How do I send my contribution?Use For more information about using How do I get help if I'm stuck?Firstly, don't get discouraged! There are an enormous number of resources on the internet, and many kernel developers who would like to see you succeed. Many issues - especially about how to use certain tools - can be resolved by using your favourite internet search engine. If you can't find an answer, there are a few places you can turn:
If you get really, really stuck, you could try the owners of this bot, @daxtens and @ajdlinux. Please be aware that we do have full-time jobs, so we are almost certainly the slowest way to get answers! I sent my patch - now what?You wait. You can check that your email has been received by checking the mailing list archives for the mailing list you sent your patch to. Messages may not be received instantly, so be patient. Kernel developers are generally very busy people, so it may take a few weeks before your patch is looked at. Then, you keep waiting. Three things may happen:
Further information
Happy hacking! This message was posted by a bot - if you have any questions or suggestions, please talk to my owners, @ajdlinux and @daxtens, or raise an issue at https://github.com/ajdlinux/KernelPRBot. |
When we are explicitly using GPIO hogging mechanism in the pinctrl node, such as: &pio { line_input { gpio-hog; gpios = <95 0>, <96 0>, <97 0>; input; }; }; A kernel panic happens at dereferencing a NULL pointer: In this case, the drvdata is still not setup properly yet when it is being accessed. A better solution for fixing up this issue should be we should obtain the private data from struct gpio_chip using a specific gpiochip_get_data instead of a generic dev_get_drvdata. [ 0.249424] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 0.257818] Mem abort info: [ 0.260704] ESR = 0x96000005 [ 0.263869] Exception class = DABT (current EL), IL = 32 bits [ 0.270011] SET = 0, FnV = 0 [ 0.273167] EA = 0, S1PTW = 0 [ 0.276421] Data abort info: [ 0.279398] ISV = 0, ISS = 0x00000005 [ 0.283372] CM = 0, WnR = 0 [ 0.286440] [00000000000000c8] user address but active_mm is swapper [ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.298795] Modules linked in: [ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ torvalds#389 [ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118 [ 0.324140] lr : mtk_hw_set_value+0x30/0x104 [ 0.328557] sp : ffffff800801b6d0 [ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970 [ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000 [ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230 [ 0.348487] x23: 0000000000000003 x22: 0000000000000000 [ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000 [ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0 [ 0.364990] x17: 0000000000006300 x16: 000000000000003f [ 0.370492] x15: 000000000000000e x14: ffffffffffffffff [ 0.375993] x13: 0000000000000000 x12: 0000000000000020 [ 0.381494] x11: 0000000000000006 x10: 0101010101010101 [ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007 [ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003 [ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800 [ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003 [ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000 [ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c) [ 0.421441] Call trace: [ 0.423968] mtk_hw_pin_field_get+0x28/0x118 [ 0.428387] mtk_hw_set_value+0x30/0x104 [ 0.432445] mtk_gpio_set+0x20/0x28 [ 0.436052] mtk_gpio_direction_output+0x18/0x30 [ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0 [ 0.446333] gpiod_direction_output+0x104/0x114 [ 0.451022] gpiod_configure_flags+0xbc/0xfc [ 0.455441] gpiod_hog+0x8c/0x140 [ 0.458869] of_gpiochip_add+0x27c/0x2d4 [ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0 [ 0.467976] mtk_pinctrl_probe+0x388/0x400 [ 0.472217] platform_drv_probe+0x58/0xa4 [ 0.476365] driver_probe_device+0x204/0x44c [ 0.480783] __device_attach_driver+0xac/0x108 [ 0.485384] bus_for_each_drv+0x7c/0xac [ 0.489352] __device_attach+0xa0/0x144 [ 0.493320] device_initial_probe+0x10/0x18 [ 0.497647] bus_probe_device+0x2c/0x8c [ 0.501616] device_add+0x2f8/0x540 [ 0.505226] of_device_add+0x3c/0x44 [ 0.508925] of_platform_device_create_pdata+0x80/0xb8 [ 0.514245] of_platform_bus_create+0x290/0x3e8 [ 0.518933] of_platform_populate+0x78/0x100 [ 0.523352] of_platform_default_populate+0x24/0x2c [ 0.528403] of_platform_default_populate_init+0x94/0xa4 [ 0.533903] do_one_initcall+0x98/0x130 [ 0.537874] kernel_init_freeable+0x13c/0x1d4 [ 0.542385] kernel_init+0x10/0xf8 [ 0.545903] ret_from_fork+0x10/0x18 [ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401) [ 0.555916] ---[ end trace de8c34787fdad3b3 ]--- [ 0.560722] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.560722] [ 0.570188] SMP: stopping secondary CPUs [ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.574253] Cc: stable@vger.kernel.org Fixes: d6ed935 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When we are explicitly using GPIO hogging mechanism in the pinctrl node, such as: &pio { line_input { gpio-hog; gpios = <95 0>, <96 0>, <97 0>; input; }; }; A kernel panic happens at dereferencing a NULL pointer: In this case, the drvdata is still not setup properly yet when it is being accessed. A better solution for fixing up this issue should be we should obtain the private data from struct gpio_chip using a specific gpiochip_get_data instead of a generic dev_get_drvdata. [ 0.249424] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 0.257818] Mem abort info: [ 0.260704] ESR = 0x96000005 [ 0.263869] Exception class = DABT (current EL), IL = 32 bits [ 0.270011] SET = 0, FnV = 0 [ 0.273167] EA = 0, S1PTW = 0 [ 0.276421] Data abort info: [ 0.279398] ISV = 0, ISS = 0x00000005 [ 0.283372] CM = 0, WnR = 0 [ 0.286440] [00000000000000c8] user address but active_mm is swapper [ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.298795] Modules linked in: [ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #389 [ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118 [ 0.324140] lr : mtk_hw_set_value+0x30/0x104 [ 0.328557] sp : ffffff800801b6d0 [ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970 [ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000 [ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230 [ 0.348487] x23: 0000000000000003 x22: 0000000000000000 [ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000 [ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0 [ 0.364990] x17: 0000000000006300 x16: 000000000000003f [ 0.370492] x15: 000000000000000e x14: ffffffffffffffff [ 0.375993] x13: 0000000000000000 x12: 0000000000000020 [ 0.381494] x11: 0000000000000006 x10: 0101010101010101 [ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007 [ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003 [ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800 [ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003 [ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000 [ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c) [ 0.421441] Call trace: [ 0.423968] mtk_hw_pin_field_get+0x28/0x118 [ 0.428387] mtk_hw_set_value+0x30/0x104 [ 0.432445] mtk_gpio_set+0x20/0x28 [ 0.436052] mtk_gpio_direction_output+0x18/0x30 [ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0 [ 0.446333] gpiod_direction_output+0x104/0x114 [ 0.451022] gpiod_configure_flags+0xbc/0xfc [ 0.455441] gpiod_hog+0x8c/0x140 [ 0.458869] of_gpiochip_add+0x27c/0x2d4 [ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0 [ 0.467976] mtk_pinctrl_probe+0x388/0x400 [ 0.472217] platform_drv_probe+0x58/0xa4 [ 0.476365] driver_probe_device+0x204/0x44c [ 0.480783] __device_attach_driver+0xac/0x108 [ 0.485384] bus_for_each_drv+0x7c/0xac [ 0.489352] __device_attach+0xa0/0x144 [ 0.493320] device_initial_probe+0x10/0x18 [ 0.497647] bus_probe_device+0x2c/0x8c [ 0.501616] device_add+0x2f8/0x540 [ 0.505226] of_device_add+0x3c/0x44 [ 0.508925] of_platform_device_create_pdata+0x80/0xb8 [ 0.514245] of_platform_bus_create+0x290/0x3e8 [ 0.518933] of_platform_populate+0x78/0x100 [ 0.523352] of_platform_default_populate+0x24/0x2c [ 0.528403] of_platform_default_populate_init+0x94/0xa4 [ 0.533903] do_one_initcall+0x98/0x130 [ 0.537874] kernel_init_freeable+0x13c/0x1d4 [ 0.542385] kernel_init+0x10/0xf8 [ 0.545903] ret_from_fork+0x10/0x18 [ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401) [ 0.555916] ---[ end trace de8c34787fdad3b3 ]--- [ 0.560722] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.560722] [ 0.570188] SMP: stopping secondary CPUs [ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.574253] Cc: stable@vger.kernel.org Fixes: d6ed935 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 5b1c4bf upstream. When we are explicitly using GPIO hogging mechanism in the pinctrl node, such as: &pio { line_input { gpio-hog; gpios = <95 0>, <96 0>, <97 0>; input; }; }; A kernel panic happens at dereferencing a NULL pointer: In this case, the drvdata is still not setup properly yet when it is being accessed. A better solution for fixing up this issue should be we should obtain the private data from struct gpio_chip using a specific gpiochip_get_data instead of a generic dev_get_drvdata. [ 0.249424] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 0.257818] Mem abort info: [ 0.260704] ESR = 0x96000005 [ 0.263869] Exception class = DABT (current EL), IL = 32 bits [ 0.270011] SET = 0, FnV = 0 [ 0.273167] EA = 0, S1PTW = 0 [ 0.276421] Data abort info: [ 0.279398] ISV = 0, ISS = 0x00000005 [ 0.283372] CM = 0, WnR = 0 [ 0.286440] [00000000000000c8] user address but active_mm is swapper [ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.298795] Modules linked in: [ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ torvalds#389 [ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118 [ 0.324140] lr : mtk_hw_set_value+0x30/0x104 [ 0.328557] sp : ffffff800801b6d0 [ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970 [ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000 [ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230 [ 0.348487] x23: 0000000000000003 x22: 0000000000000000 [ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000 [ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0 [ 0.364990] x17: 0000000000006300 x16: 000000000000003f [ 0.370492] x15: 000000000000000e x14: ffffffffffffffff [ 0.375993] x13: 0000000000000000 x12: 0000000000000020 [ 0.381494] x11: 0000000000000006 x10: 0101010101010101 [ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007 [ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003 [ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800 [ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003 [ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000 [ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c) [ 0.421441] Call trace: [ 0.423968] mtk_hw_pin_field_get+0x28/0x118 [ 0.428387] mtk_hw_set_value+0x30/0x104 [ 0.432445] mtk_gpio_set+0x20/0x28 [ 0.436052] mtk_gpio_direction_output+0x18/0x30 [ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0 [ 0.446333] gpiod_direction_output+0x104/0x114 [ 0.451022] gpiod_configure_flags+0xbc/0xfc [ 0.455441] gpiod_hog+0x8c/0x140 [ 0.458869] of_gpiochip_add+0x27c/0x2d4 [ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0 [ 0.467976] mtk_pinctrl_probe+0x388/0x400 [ 0.472217] platform_drv_probe+0x58/0xa4 [ 0.476365] driver_probe_device+0x204/0x44c [ 0.480783] __device_attach_driver+0xac/0x108 [ 0.485384] bus_for_each_drv+0x7c/0xac [ 0.489352] __device_attach+0xa0/0x144 [ 0.493320] device_initial_probe+0x10/0x18 [ 0.497647] bus_probe_device+0x2c/0x8c [ 0.501616] device_add+0x2f8/0x540 [ 0.505226] of_device_add+0x3c/0x44 [ 0.508925] of_platform_device_create_pdata+0x80/0xb8 [ 0.514245] of_platform_bus_create+0x290/0x3e8 [ 0.518933] of_platform_populate+0x78/0x100 [ 0.523352] of_platform_default_populate+0x24/0x2c [ 0.528403] of_platform_default_populate_init+0x94/0xa4 [ 0.533903] do_one_initcall+0x98/0x130 [ 0.537874] kernel_init_freeable+0x13c/0x1d4 [ 0.542385] kernel_init+0x10/0xf8 [ 0.545903] ret_from_fork+0x10/0x18 [ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401) [ 0.555916] ---[ end trace de8c34787fdad3b3 ]--- [ 0.560722] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.560722] [ 0.570188] SMP: stopping secondary CPUs [ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.574253] Cc: stable@vger.kernel.org Fixes: d6ed935 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b1c4bf upstream. When we are explicitly using GPIO hogging mechanism in the pinctrl node, such as: &pio { line_input { gpio-hog; gpios = <95 0>, <96 0>, <97 0>; input; }; }; A kernel panic happens at dereferencing a NULL pointer: In this case, the drvdata is still not setup properly yet when it is being accessed. A better solution for fixing up this issue should be we should obtain the private data from struct gpio_chip using a specific gpiochip_get_data instead of a generic dev_get_drvdata. [ 0.249424] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 0.257818] Mem abort info: [ 0.260704] ESR = 0x96000005 [ 0.263869] Exception class = DABT (current EL), IL = 32 bits [ 0.270011] SET = 0, FnV = 0 [ 0.273167] EA = 0, S1PTW = 0 [ 0.276421] Data abort info: [ 0.279398] ISV = 0, ISS = 0x00000005 [ 0.283372] CM = 0, WnR = 0 [ 0.286440] [00000000000000c8] user address but active_mm is swapper [ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.298795] Modules linked in: [ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ torvalds#389 [ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118 [ 0.324140] lr : mtk_hw_set_value+0x30/0x104 [ 0.328557] sp : ffffff800801b6d0 [ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970 [ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000 [ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230 [ 0.348487] x23: 0000000000000003 x22: 0000000000000000 [ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000 [ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0 [ 0.364990] x17: 0000000000006300 x16: 000000000000003f [ 0.370492] x15: 000000000000000e x14: ffffffffffffffff [ 0.375993] x13: 0000000000000000 x12: 0000000000000020 [ 0.381494] x11: 0000000000000006 x10: 0101010101010101 [ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007 [ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003 [ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800 [ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003 [ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000 [ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c) [ 0.421441] Call trace: [ 0.423968] mtk_hw_pin_field_get+0x28/0x118 [ 0.428387] mtk_hw_set_value+0x30/0x104 [ 0.432445] mtk_gpio_set+0x20/0x28 [ 0.436052] mtk_gpio_direction_output+0x18/0x30 [ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0 [ 0.446333] gpiod_direction_output+0x104/0x114 [ 0.451022] gpiod_configure_flags+0xbc/0xfc [ 0.455441] gpiod_hog+0x8c/0x140 [ 0.458869] of_gpiochip_add+0x27c/0x2d4 [ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0 [ 0.467976] mtk_pinctrl_probe+0x388/0x400 [ 0.472217] platform_drv_probe+0x58/0xa4 [ 0.476365] driver_probe_device+0x204/0x44c [ 0.480783] __device_attach_driver+0xac/0x108 [ 0.485384] bus_for_each_drv+0x7c/0xac [ 0.489352] __device_attach+0xa0/0x144 [ 0.493320] device_initial_probe+0x10/0x18 [ 0.497647] bus_probe_device+0x2c/0x8c [ 0.501616] device_add+0x2f8/0x540 [ 0.505226] of_device_add+0x3c/0x44 [ 0.508925] of_platform_device_create_pdata+0x80/0xb8 [ 0.514245] of_platform_bus_create+0x290/0x3e8 [ 0.518933] of_platform_populate+0x78/0x100 [ 0.523352] of_platform_default_populate+0x24/0x2c [ 0.528403] of_platform_default_populate_init+0x94/0xa4 [ 0.533903] do_one_initcall+0x98/0x130 [ 0.537874] kernel_init_freeable+0x13c/0x1d4 [ 0.542385] kernel_init+0x10/0xf8 [ 0.545903] ret_from_fork+0x10/0x18 [ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401) [ 0.555916] ---[ end trace de8c34787fdad3b3 ]--- [ 0.560722] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.560722] [ 0.570188] SMP: stopping secondary CPUs [ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.574253] Cc: stable@vger.kernel.org Fixes: d6ed935 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…applied When we are explicitly using GPIO hogging mechanism in the pinctrl node, such as: &pio { line_input { gpio-hog; gpios = <95 0>, <96 0>, <97 0>; input; }; }; A kernel panic happens at dereferencing a NULL pointer: In this case, the drvdata is still not setup properly yet when it is being accessed. A better solution for fixing up this issue should be we should obtain the private data from struct gpio_chip using a specific gpiochip_get_data instead of a generic dev_get_drvdata. [ 0.249424] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 0.257818] Mem abort info: [ 0.260704] ESR = 0x96000005 [ 0.263869] Exception class = DABT (current EL), IL = 32 bits [ 0.270011] SET = 0, FnV = 0 [ 0.273167] EA = 0, S1PTW = 0 [ 0.276421] Data abort info: [ 0.279398] ISV = 0, ISS = 0x00000005 [ 0.283372] CM = 0, WnR = 0 [ 0.286440] [00000000000000c8] user address but active_mm is swapper [ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.298795] Modules linked in: [ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ thesofproject#389 [ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118 [ 0.324140] lr : mtk_hw_set_value+0x30/0x104 [ 0.328557] sp : ffffff800801b6d0 [ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970 [ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000 [ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230 [ 0.348487] x23: 0000000000000003 x22: 0000000000000000 [ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000 [ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0 [ 0.364990] x17: 0000000000006300 x16: 000000000000003f [ 0.370492] x15: 000000000000000e x14: ffffffffffffffff [ 0.375993] x13: 0000000000000000 x12: 0000000000000020 [ 0.381494] x11: 0000000000000006 x10: 0101010101010101 [ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007 [ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003 [ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800 [ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003 [ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000 [ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c) [ 0.421441] Call trace: [ 0.423968] mtk_hw_pin_field_get+0x28/0x118 [ 0.428387] mtk_hw_set_value+0x30/0x104 [ 0.432445] mtk_gpio_set+0x20/0x28 [ 0.436052] mtk_gpio_direction_output+0x18/0x30 [ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0 [ 0.446333] gpiod_direction_output+0x104/0x114 [ 0.451022] gpiod_configure_flags+0xbc/0xfc [ 0.455441] gpiod_hog+0x8c/0x140 [ 0.458869] of_gpiochip_add+0x27c/0x2d4 [ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0 [ 0.467976] mtk_pinctrl_probe+0x388/0x400 [ 0.472217] platform_drv_probe+0x58/0xa4 [ 0.476365] driver_probe_device+0x204/0x44c [ 0.480783] __device_attach_driver+0xac/0x108 [ 0.485384] bus_for_each_drv+0x7c/0xac [ 0.489352] __device_attach+0xa0/0x144 [ 0.493320] device_initial_probe+0x10/0x18 [ 0.497647] bus_probe_device+0x2c/0x8c [ 0.501616] device_add+0x2f8/0x540 [ 0.505226] of_device_add+0x3c/0x44 [ 0.508925] of_platform_device_create_pdata+0x80/0xb8 [ 0.514245] of_platform_bus_create+0x290/0x3e8 [ 0.518933] of_platform_populate+0x78/0x100 [ 0.523352] of_platform_default_populate+0x24/0x2c [ 0.528403] of_platform_default_populate_init+0x94/0xa4 [ 0.533903] do_one_initcall+0x98/0x130 [ 0.537874] kernel_init_freeable+0x13c/0x1d4 [ 0.542385] kernel_init+0x10/0xf8 [ 0.545903] ret_from_fork+0x10/0x18 [ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401) [ 0.555916] ---[ end trace de8c34787fdad3b3 ]--- [ 0.560722] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.560722] [ 0.570188] SMP: stopping secondary CPUs [ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.574253] Cc: stable@vger.kernel.org Fixes: d6ed935 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> (cherry picked from commit 5b1c4bf) BUG=b:109911488 TEST=build and boot to shell Change-Id: Ibda39afba21a26ea23c6732f6f95bb503414c8f0 Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Reviewed-on: https://chromium-review.googlesource.com/1282883 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Reviewed-by: Pi-Hsun Shih <pihsun@chromium.org>
This parameter is used to put a delay before calling main() function of an LKL application. Fixes torvalds#389. Signed-off-by: Hajime Tazaki <thehajime@gmail.com>
Despite taking the intel_gt wakeref, and asserting that we do indeed hold the runtime-pm wakeref for the device, our mmio debug insists that the irq enabling is not being recognised: [ 19.342117] Unclaimed write to register 0x220a8 [ 19.342185] WARNING: CPU: 2 PID: 619 at __unclaimed_reg_debug+0x4f/0x60 [i915] [ 19.342192] Modules linked in: nls_ascii nls_cp437 vfat i915 crct10dif_pclmul fat crc32_pclmul crc32c_intel aesni_intel glue_helper crypto_simd cryptd intel_cstate ahci intel_gtt libahci intel_uncore drm_kms_helper intel_rapl_perf i2c_i801 efivars video button efivarfs [ 19.342224] CPU: 2 PID: 619 Comm: gem_exec_parse_ Tainted: G U 5.4.0-rc8+ torvalds#389 [ 19.342230] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [ 19.342283] RIP: 0010:__unclaimed_reg_debug+0x4f/0x60 [i915] [ 19.342291] Code: 06 5b 5d 41 5c c3 c3 45 84 e4 48 c7 c0 15 af 2c a0 48 c7 c6 0b af 2c a0 89 ea 48 0f 44 f0 48 c7 c7 1e af 2c a0 e8 c7 56 e9 e0 <0f> 0b 83 2d e8 03 18 00 01 5b 5d 41 5c c3 0f 1f 00 23 b7 a4 00 00 [ 19.342301] RSP: 0018:ffffc90000553a28 EFLAGS: 00010092 [ 19.342309] RAX: 0000000000000023 RBX: 0000000000000000 RCX: 0000000000000006 [ 19.342316] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff88885eb163a0 [ 19.342322] RBP: 00000000000220a8 R08: 000000000000028c R09: ffff88885a4c47c0 [ 19.342328] R10: 0000000000000000 R11: 000000085488de02 R12: 0000000000000000 [ 19.342334] R13: ffff8888548407c8 R14: 0000000000000006 R15: ffffc90000553b7c [ 19.342341] FS: 00007f0e8a2879c0(0000) GS:ffff88885eb00000(0000) knlGS:0000000000000000 [ 19.342349] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.342355] CR2: 00007f0e8c235e12 CR3: 0000000858ef7001 CR4: 00000000001606e0 [ 19.342361] Call Trace: [ 19.342413] fwtable_write32+0x1a0/0x1e0 [i915] [ 19.342476] gen8_logical_ring_enable_irq+0x2d/0x40 [i915] [ 19.342541] irq_enable.part.14+0x1d/0x30 [i915] [ 19.342598] i915_request_enable_breadcrumb+0x16a/0x1a0 [i915] [ 19.342611] ? sync_file_alloc+0x80/0x80 [ 19.342620] __dma_fence_enable_signaling+0x2c/0x50 [ 19.342629] dma_fence_add_callback+0x34/0x90 [ 19.342638] sync_file_poll+0x7b/0xa0 Just silence the critics :( References: 045d1fb ("drm/i915/gt: Acquire a GT wakeref for the breadcrumb interrupt") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
rust/kernel/of: apply additional documentation suggestions
No description provided.