Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP

Loading…

Odroid 3.13.y #75

Open
wants to merge 654 commits into from
@john1117

No description provided.

rostedt and others added some commits
@rostedt rostedt ring-buffer: Fix first commit on sub-buffer having non-zero delta
commit d651aa1 upstream.

Each sub-buffer (buffer page) has a full 64 bit timestamp. The events on
that page use a 27 bit delta against that timestamp in order to save on
bits written to the ring buffer. If the time between events is larger than
what the 27 bits can hold, a "time extend" event is added to hold the
entire 64 bit timestamp again and the events after that hold a delta from
that timestamp.

As a "time extend" is always paired with an event, it is logical to just
allocate the event with the time extend, to make things a bit more efficient.

Unfortunately, when the pairing code was written, it removed the "delta = 0"
from the first commit on a page, causing the events on the page to be
slightly skewed.

Fixes: 69d1b83 "ring-buffer: Bind time extend and data events together"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
050d4e1
@nablio3000 nablio3000 target: Fix free-after-use regression in PR unregister
commit fc09149 upstream.

This patch addresses a >= v3.11 free-after-use regression
in core_scsi3_emulate_pro_register() that was introduced
in the following commit:

commit bc118fe
Author: Andy Grover <agrover@redhat.com>
Date:   Thu May 16 10:41:04 2013 -0700

    target: Further refactoring of core_scsi3_emulate_pro_register()

To avoid the free-after-use, save an type value before hand, and
only call core_scsi3_put_pr_reg() with a valid *pr_reg.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a9d3edf
Borislav Petkov EDAC: Poll timeout cannot be zero, p2
commit 9da21b1 upstream.

Sanitize code even more to accept unsigned longs only and to not allow
polling intervals below 1 second as this is unnecessary and doesn't make
much sense anyway for polling errors.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
096a9cf
Paul Gortmaker genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n
commit 2c45aad upstream.

In allmodconfig builds for sparc and any other arch which does
not set CONFIG_SPARSE_IRQ, the following will be seen at modpost:

  CC [M]  lib/cpu-notifier-error-inject.o
  CC [M]  lib/pm-notifier-error-inject.o
ERROR: "irq_to_desc" [drivers/gpio/gpio-mcp23s08.ko] undefined!
make[2]: *** [__modpost] Error 1

This happens because commit 3911ff3 ("genirq: export
handle_edge_irq() and irq_to_desc()") added one export for it, but
there were actually two instances of it, in an if/else clause for
CONFIG_SPARSE_IRQ.  Add the second one.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Link: http://lkml.kernel.org/r/1392057610-11514-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1c1fdf4
Prarit Bhargava drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero
commit 79040ca upstream.

If you do

  echo 0 > /sys/module/edac_core/parameters/edac_mc_poll_msec

the following stack trace is output because the edac module is not
designed to poll with a timeout of zero.

  WARNING: CPU: 12 PID: 0 at lib/list_debug.c:33 __list_add+0xac/0xc0()
  list_add corruption. prev->next should be next (ffff8808291dd1b8), but was           (null). (prev=ffff8808286fe3f8).
  Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod
  CPU: 12 PID: 0 Comm: swapper/12 Not tainted 3.13.0+ #1
  Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
  Call Trace:
   <IRQ>
    __list_add+0xac/0xc0
    __internal_add_timer+0xab/0x130
    internal_add_timer+0x17/0x40
    mod_timer_pinned+0xca/0x170
    intel_pstate_timer_func+0x28a/0x380
    call_timer_fn+0x36/0x100
    run_timer_softirq+0x1ff/0x2f0
    __do_softirq+0xf5/0x2e0
    irq_exit+0x10d/0x120
    smp_apic_timer_interrupt+0x45/0x60
    apic_timer_interrupt+0x6d/0x80
   <EOI>
    cpuidle_idle_call+0xb9/0x1f0
    arch_cpu_idle+0xe/0x30
    cpu_startup_entry+0x9e/0x240
    start_secondary+0x1e4/0x290

  kernel BUG at kernel/timer.c:1084!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod
  CPU: 12 PID: 0 Comm: swapper/12 Tainted: G        W    3.13.0+ #1
  Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
  Call Trace:
   <IRQ>
    run_timer_softirq+0x245/0x2f0
    __do_softirq+0xf5/0x2e0
    irq_exit+0x10d/0x120
    smp_apic_timer_interrupt+0x45/0x60
    apic_timer_interrupt+0x6d/0x80
   <EOI>
    cpuidle_idle_call+0xb9/0x1f0
    arch_cpu_idle+0xe/0x30
    cpu_startup_entry+0x9e/0x240
    start_secondary+0x1e4/0x290
  RIP   cascade+0x93/0xa0

  WARNING: CPU: 36 PID: 1154 at kernel/workqueue.c:1461 __queue_delayed_work+0xed/0x1a0()
  Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod
  CPU: 36 PID: 1154 Comm: kworker/u481:3 Tainted: G        W    3.13.0+ #1
  Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
  Workqueue: edac-poller edac_mc_workq_function [edac_core]
  Call Trace:
    dump_stack+0x45/0x56
    warn_slowpath_common+0x7d/0xa0
    warn_slowpath_null+0x1a/0x20
    __queue_delayed_work+0xed/0x1a0
    queue_delayed_work_on+0x27/0x50
    edac_mc_workq_function+0x72/0xa0 [edac_core]
    process_one_work+0x17b/0x460
    worker_thread+0x11b/0x400
    kthread+0xd2/0xf0
    ret_from_fork+0x7c/0xb0

This patch adds a range check in the edac_mc_poll_msec code to check for 0.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
33cd95f
Borislav Petkov EDAC: Correct workqueue setup path
commit cb6ef42 upstream.

We're using edac_mc_workq_setup() both on the init path, when
we load an edac driver and when we change the polling period
(edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec.

On that second path we don't need to init the workqueue which has been
initialized already.

Thanks to Tejun for workqueue insights.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
c9948e7
@gregkh gregkh Linux 3.13.5
dc0ead5
@hgn hgn referenced this pull request from a commit in hgn/linux
Borislav Petkov x86/boot: Further compress CPUs bootup message
Turn it into (for example):

[    0.073380] x86: Booting SMP configuration:
[    0.074005] .... node   #0, CPUs:          #1   #2   #3   #4   #5   #6   #7
[    0.603005] .... node   #1, CPUs:     #8   #9  #10  #11  #12  #13  #14  #15
[    1.200005] .... node   #2, CPUs:    #16  #17  #18  #19  #20  #21  #22  #23
[    1.796005] .... node   #3, CPUs:    #24  #25  #26  #27  #28  #29  #30  #31
[    2.393005] .... node   #4, CPUs:    #32  #33  #34  #35  #36  #37  #38  #39
[    2.996005] .... node   #5, CPUs:    #40  #41  #42  #43  #44  #45  #46  #47
[    3.600005] .... node   #6, CPUs:    #48  #49  #50  #51  #52  #53  #54  #55
[    4.202005] .... node   #7, CPUs:    #56  #57  #58  #59  #60  #61  #62  #63
[    4.811005] .... node   #8, CPUs:    #64  #65  #66  #67  #68  #69  #70  #71
[    5.421006] .... node   #9, CPUs:    #72  #73  #74  #75  #76  #77  #78  #79
[    6.032005] .... node  #10, CPUs:    #80  #81  #82  #83  #84  #85  #86  #87
[    6.648006] .... node  #11, CPUs:    #88  #89  #90  #91  #92  #93  #94  #95
[    7.262005] .... node  #12, CPUs:    #96  #97  #98  #99 #100 #101 #102 #103
[    7.865005] .... node  #13, CPUs:   #104 #105 #106 #107 #108 #109 #110 #111
[    8.466005] .... node  #14, CPUs:   #112 #113 #114 #115 #116 #117 #118 #119
[    9.073006] .... node  #15, CPUs:   #120 #121 #122 #123 #124 #125 #126 #127
[    9.679901] x86: Booted up 16 nodes, 128 CPUs

and drop useless elements.

Change num_digits() to hpa's division-avoiding, cell-phone-typed
version which he went at great lengths and pains to submit on a
Saturday evening.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: huawei.libin@huawei.com
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
a17bce4
Alex Deucher and others added some commits
Alex Deucher drm/radeon: fix display tiling setup on SI
commit 6d8ea7d upstream.

Apply the same logic as CI to SI for setting up the
display tiling parameters.  The num banks may vary
per tiling index just like CI.

Bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=71488
https://bugs.freedesktop.org/show_bug.cgi?id=73946
https://bugs.freedesktop.org/show_bug.cgi?id=74927

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9c06e42
Alex Deucher drm/radeon/ni: fix typo in dpm sq ramping setup
commit 21ed494 upstream.

inverted logic.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
31db117
@imirkin imirkin drm/nouveau: set irq_enabled manually
commit 7d3428c upstream.

Since commit 0fa9061 ("drm/nouveau/mc: handle irq-related setup
ourselves"), drm_device->irq_enabled remained unset. This is needed in
order to properly wait for a vblank event in the generic drm code.

See https://bugs.freedesktop.org/show_bug.cgi?id=74195

Reported-by: Jan Janecek <janjanjanx@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f6283df
@vsyrjala vsyrjala drm/i915: Add intel_ring_cachline_align()
commit 753b1ad upstream.

intel_ring_cachline_align() emits MI_NOOPs until the ring tail is
aligned to a cacheline boundary.

Cc: Bjoern C <lkml@call-home.ch>
Cc: Alexandru DAMIAN <alexandru.damian@intel.com>
Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12b96a3
@vsyrjala vsyrjala drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVB
commit f66fab8 upstream.

According to BSpec the entire MI_DISPLAY_FLIP packet must be contained
in a single cacheline. Make sure that happens.

v2: Use intel_ring_begin_cacheline_safe()
v3: Use intel_ring_cacheline_align() (Chris)

Cc: Bjoern C <lkml@call-home.ch>
Cc: Alexandru DAMIAN <alexandru.damian@intel.com>
Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74053
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
05524f5
@evelikov evelikov drm/nouveau/fb: use correct ram oclass for nv1a hardware
commit 95ca5b5 upstream.

commit 8613e73
Author: Ben Skeggs <bskeggs@redhat.com>
Date:   Mon Oct 21 08:50:25 2013 +1000

    drm/nouveau/fb: remove ram oclass argument from base fb constructor

Introduced a unfortunate regression by using nv10 ram oclass for nv1a
hardware, causing corruption and eventually system lockup.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74866
Reported-by: John F. Godfrey <jfgodfrey@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
88fd02d
@imirkin imirkin drm/nv50/disp: use correct register to determine DP display bpp
commit a7f1c1e upstream.

Commit 0a0afd2 ("drm/nv50-/disp: move DP link training to core and
train from supervisor") added code that uses the wrong register for
computing the display bpp, used for bandwidth calculation. Adjust to use
the same register as used by exec_clkcmp and nv50_disp_intr_unk20_2_dp.

Reported-by: Torsten Wagner <torsten.wagner@gmail.com>
Reported-by: Michael Gulick <mgulick@mathworks.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67628
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9d25c29
Christian König drm/radeon: fix CP semaphores on CIK
commit 8f53492 upstream.

The CP semaphore queue on CIK has a bug that triggers if uncompleted
waits use the same address while a signal is still pending. Work around
this by using different addresses for each sync.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
035a110
Marek Szyprowski ARM: dma-mapping: fix GFP_ATOMIC macro usage
commit 10c8562 upstream.

GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other
flags and LACK of __GFP_WAIT flag. To check if caller wanted to perform an
atomic allocation, the code must test __GFP_WAIT flag presence. This patch
fixes the issue introduced in v3.6-rc5

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8a6c4cd
Eric Whitney ext4: fix xfstest generic/299 block validity failures
commit 15cc176 upstream.

Commit a115f74 (ext4: remove wait for unwritten extent conversion from
ext4_truncate) exposed a bug in ext4_ext_handle_uninitialized_extents().
It can be triggered by xfstest generic/299 when run on a test file
system created without a journal.  This test continuously fallocates and
truncates files to which random dio/aio writes are simultaneously
performed by a separate process.  The test completes successfully, but
if the test filesystem is mounted with the block_validity option, a
warning message stating that a logical block has been mapped to an
illegal physical block is posted in the kernel log.

The bug occurs when an extent is being converted to the written state
by ext4_end_io_dio() and ext4_ext_handle_uninitialized_extents()
discovers a mapping for an existing uninitialized extent. Although it
sets EXT4_MAP_MAPPED in map->m_flags, it fails to set map->m_pblk to
the discovered physical block number.  Because map->m_pblk is not
otherwise initialized or set by this function or its callers, its
uninitialized value is returned to ext4_map_blocks(), where it is
stored as a bogus mapping in the extent status tree.

Since map->m_pblk can accidentally contain illegal values that are
larger than the physical size of the file system,  calls to
check_block_validity() in ext4_map_blocks() that are enabled if the
block_validity mount option is used can fail, resulting in the logged
warning message.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4c5e5c7
@gnehzuil gnehzuil ext4: fix error paths in swap_inode_boot_loader()
commit 30d29b1 upstream.

In swap_inode_boot_loader() we forgot to release ->i_mutex and resume
unlocked dio for inode and inode_bl if there is an error starting the
journal handle.  This commit fixes this issue.

Reported-by: Ahmed Tamrawi <ahmedtamrawi@gmail.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dr. Tilmann Bubeck <t.bubeck@reinform.de>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
087cee5
@tytso tytso ext4: don't try to modify s_flags if the the file system is read-only
commit 2330141 upstream.

If an ext4 file system is created by some tool other than mke2fs
(perhaps by someone who has a pathalogical fear of the GPL) that
doesn't set one or the other of the EXT2_FLAGS_{UN}SIGNED_HASH flags,
and that file system is then mounted read-only, don't try to modify
the s_flags field.  Otherwise, if dm_verity is in use, the superblock
will change, causing an dm_verity failure.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1503cbd
@tytso tytso ext4: fix online resize with very large inode tables
commit b93c953 upstream.

If a file system has a large number of inodes per block group, all of
the metadata blocks in a flex_bg may be larger than what can fit in a
single block group.  Unfortunately, ext4_alloc_group_tables() in
resize.c was never tested to see if it would handle this case
correctly, and there were a large number of bugs which caused the
following sequence to result in a BUG_ON:

kernel bug at fs/ext4/resize.c:409!
   ...
call trace:
 [<ffffffff81256768>] ext4_flex_group_add+0x1448/0x1830
 [<ffffffff81257de2>] ext4_resize_fs+0x7b2/0xe80
 [<ffffffff8123ac50>] ext4_ioctl+0xbf0/0xf00
 [<ffffffff811c111d>] do_vfs_ioctl+0x2dd/0x4b0
 [<ffffffff811b9df2>] ? final_putname+0x22/0x50
 [<ffffffff811c1371>] sys_ioctl+0x81/0xa0
 [<ffffffff81676aa9>] system_call_fastpath+0x16/0x1b
code: c8 4c 89 df e8 41 96 f8 ff 44 89 e8 49 01 c4 44 29 6d d4 0
rip  [<ffffffff81254fa1>] set_flexbg_block_bitmap+0x171/0x180


This can be reproduced with the following command sequence:

   mke2fs -t ext4 -i 4096 /dev/vdd 1G
   mount -t ext4 /dev/vdd /vdd
   resize2fs /dev/vdd 8G

To fix this, we need to make sure the right thing happens when a block
group's inode table straddles two block groups, which means the
following bugs had to be fixed:

1) Not clearing the BLOCK_UNINIT flag in the second block group in
   ext4_alloc_group_tables --- the was proximate cause of the BUG_ON.

2) Incorrectly determining how many block groups contained contiguous
   free blocks in ext4_alloc_group_tables().

3) Incorrectly setting the start of the next block range to be marked
   in use after a discontinuity in setup_new_flex_group_blocks().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
385d7ce
@tytso tytso ext4: fix online resize with a non-standard blocks per group setting
commit 3d2660d upstream.

The set_flexbg_block_bitmap() function assumed that the number of
blocks in a blockgroup was sb->blocksize * 8, which is normally true,
but not always!  Use EXT4_BLOCKS_PER_GROUP(sb) instead, to fix block
bitmap corruption after:

mke2fs -t ext4 -g 3072 -i 4096 /dev/vdd 1G
mount -t ext4 /dev/vdd /vdd
resize2fs /dev/vdd 8G

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Jon Bernard <jbernard@tuxion.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fe01b1a
@tytso tytso ext4: don't leave i_crtime.tv_sec uninitialized
commit 19ea806 upstream.

If the i_crtime field is not present in the inode, don't leave the
field uninitialized.

Fixes: ef7f383 ("ext4: Add nanosecond timestamps")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1883d76
@pekongupta pekongupta ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND …
…is built as module

commit 6b187b2 upstream.

Fixes: commit bc6b1e7
       ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND

OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and
register them platform_device for NAND driver to probe later. However this does
not happen if generic MTD_NAND framework is built as module (CONFIG_MTD_NAND=m).

Therefore, when MTD/NAND and MTD/NAND/OMAP2 modules are loaded, they are unable
to find any matching platform_device and remain un-binded. This causes on board
NAND flash to remain un-detected.

This patch causes GPMC controller to parse DT nodes when
CONFIG_MTD_NAND=y || CONFIG_MTD_NAND=m

Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9990998
@pekongupta pekongupta ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ON…
…ENAND is built as module

commit 980386d upstream.

Fixes: commit 75d3625
       ARM: OMAP2+: gpmc: add DT bindings for OneNAND

OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and
register them platform_device for ONENAND driver to probe later. However this does
not happen if generic MTD_ONENAND framework is built as module (CONFIG_MTD_ONENAND=m).

Therefore, when MTD/ONENAND and MTD/ONENAND/OMAP2 modules are loaded, they are unable
to find any matching platform_device and remain un-binded. This causes on board
ONENAND flash to remain un-detected.

This patch causes GPMC controller to parse DT nodes when
CONFIG_MTD_ONENAND=y || CONFIG_MTD_ONENAND=m

Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2e5b5c4
Christoffer Dall ARM: 7950/1: mm: Fix stage-2 device memory attributes
commit 4d9c5b8 upstream.

The stage-2 memory attributes are distinct from the Hyp memory
attributes and the Stage-1 memory attributes.  We were using the stage-1
memory attributes for stage-2 mappings causing device mappings to be
mapped as normal memory.  Add the S2 equivalent defines for memory
attributes and fix the comments explaining the defines while at it.

Add a prot_pte_s2 field to the mem_type struct and fill out the field
for device mappings accordingly.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
76d8000
@wildea01 wildea01 ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU
commit bae0ca2 upstream.

During __v{6,7}_setup, we invalidate the TLBs since we are about to
enable the MMU on return to head.S. Unfortunately, without a subsequent
dsb instruction, the invalidation is not guaranteed to have completed by
the time we write to the sctlr, potentially exposing us to junk/stale
translations cached in the TLB.

This patch reworks the init functions so that the dsb used to ensure
completion of cache/predictor maintenance is also used to ensure
completion of the TLB invalidation.

Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
670c8af
@wildea01 wildea01 ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev
commit 7c8746a upstream.

When unlocking a spinlock, we require the following, strictly ordered
sequence of events:

	<barrier>	/* dmb */
	<unlock>
	<barrier>	/* dsb */
	<sev>

Whilst the code does indeed reflect this in terms of the architecture,
the final <barrier> + <sev> have been contracted into a single inline
asm without a "memory" clobber, therefore the compiler is at liberty to
reorder the unlock to the end of the above sequence. In such a case,
a waiting CPU may be woken up before the lock has been unlocked, leading
to extremely poor performance.

This patch reworks the dsb_sev() function to make use of the dsb()
macro and ensure ordering against the unlock.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12f9e10
Vinayak Kale ARM: 7957/1: add DSB after icache flush in __flush_icache_all()
commit 39544ac upstream.

Add DSB after icache flush to complete the cache maintenance operation.

Signed-off-by: Vinayak Kale <vkale@apm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a0d5d1b
Paul Gortmaker avr32: fix missing module.h causing build failure in mimc200/fram.c
commit 5745d6a upstream.

Causing this:

In file included from arch/avr32/boards/mimc200/fram.c:13:
include/linux/miscdevice.h:51: error: field 'list' has incomplete type
include/linux/miscdevice.h:55: error: expected specifier-qualifier-list before 'mode_t'
arch/avr32/boards/mimc200/fram.c:42: error: 'THIS_MODULE' undeclared here (not in a function)

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bfe9485
@haokexin haokexin powerpc: Set the correct ksp_limit on ppc32 when switching to irq stack
commit 1a18a66 upstream.

Guenter Roeck has got the following call trace on a p2020 board:
  Kernel stack overflow in process eb3e5a00, r1=eb79df90
  CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4
  task: eb3e5a00 ti: c0616000 task.ti: ef440000
  NIP: c003a420 LR: c003a410 CTR: c0017518
  REGS: eb79dee0 TRAP: 0901   Not tainted (3.13.0-rc8-juniper-00146-g19eca00)
  MSR: 00029000 <CE,EE,ME>  CR: 24008444  XER: 00000000
  GPR00: c003a410 eb79df90 eb3e5a00 00000000 eb05d900 00000001 65d87646 00000000
  GPR08: 00000000 020b8000 00000000 00000000 44008442
  NIP [c003a420] __do_softirq+0x94/0x1ec
  LR [c003a410] __do_softirq+0x84/0x1ec
  Call Trace:
  [eb79df90] [c003a410] __do_softirq+0x84/0x1ec (unreliable)
  [eb79dfe0] [c003a970] irq_exit+0xbc/0xc8
  [eb79dff0] [c000cc1c] call_do_irq+0x24/0x3c
  [ef441f20] [c00046a8] do_IRQ+0x8c/0xf8
  [ef441f40] [c000e7f4] ret_from_except+0x0/0x18
  --- Exception: 501 at 0xfcda524
      LR = 0x10024900
  Instruction dump:
  7c781b78 3b40000a 3a73b040 543c0024 3a800000 3b3913a0 7ef5bb78 48201bf9
  5463103a 7d3b182e 7e89b92e 7c008146 <3ba00000> 7e7e9b78 48000014 57fff87f
  Kernel panic - not syncing: kernel stack overflow
  CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4
  Call Trace:

The reason is that we have used the wrong register to calculate the
ksp_limit in commit cbc9565 (powerpc: Remove ksp_limit on ppc64).
Just fix it.

As suggested by Benjamin Herrenschmidt, also add the C prototype of the
function in the comment in order to avoid such kind of errors in the
future.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9d2e419
@shangw shangw powerpc/powernv: Rework EEH reset
commit 5b2e198 upstream.

When doing reset in order to recover the affected PE, we issue
hot reset on PE primary bus if it's not root bus. Otherwise, we
issue hot or fundamental reset on root port or PHB accordingly.
For the later case, we didn't cover the situation where PE only
includes root port and it potentially causes kernel crash upon
EEH error to the PE.

The patch reworks the logic of EEH reset to improve the code
readability and also avoid the kernel crash.

Reported-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e016430
Dan Carpenter jbd2: fix use after free in jbd2_journal_start_reserved()
commit 92e3b40 upstream.

If start_this_handle() fails then it leads to a use after free of
"handle".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d3142a0
Shawn Guo ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
commit 28a9f3b upstream.

When building a kernel image with only CONFIG_CPU_IDLE but no CONFIG_PM,
we will get the following link error.

  LD      init/built-in.o
arch/arm/mach-imx/built-in.o: In function `imx6q_enter_wait':
platform-spi_imx.c:(.text+0x25c0): undefined reference to `imx6q_set_lpm'
platform-spi_imx.c:(.text+0x25d4): undefined reference to `imx6q_set_lpm'
arch/arm/mach-imx/built-in.o: In function `imx6q_cpuidle_init':
platform-spi_imx.c:(.init.text+0x75d4): undefined reference to `imx6q_set_chicken_bit'
make[1]: *** [vmlinux] Error 1

Since pm-imx6q.c has been a collection of library functions that access
CCM low-power registers used by not only suspend but also cpuidle and
other drivers, let's build pm-imx6q.c independently of CONFIG_PM to fix
above error.

Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d15c4c3
@swarren swarren ARM: tegra: only run PL310 init on systems with one
commit 8859685 upstream.

Fix tegra_init_cache() to check whether the system has a PL310 cache
before touching the PL310 registers. This prevents access to non-existent
registers on Tegra114 and later.

Note for stable kernels:
In <= v3.12, the file to patch is arch/arm/mach-tegra/common.c.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f6a19e4
Olivier Langlois rtlwifi: rtl8192ce: Fix too long disable of IRQs
commit f78bccd upstream.

rtl8192ce is disabling for too long the local interrupts during hw initiatialisation when performing scans

The observable symptoms in dmesg can be:

- underruns from ALSA playback
- clock freezes (tstamps do not change for several dmesg entries until irqs are finaly reenabled):

[  250.817669] rtlwifi:rtl_op_config():<0-0-0> 0x100
[  250.817685] rtl8192ce:_rtl92ce_phy_set_rf_power_state():<0-1-0> IPS Set eRf nic enable
[  250.817732] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.817796] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.817910] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818024] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818139] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818253] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818367] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11
[  250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:98053f15:10
[  250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1
[  250.818472] rtl8192c_common:rtl92c_download_fw():<0-1-0> Firmware Version(49), Signature(0x88c1),Size(32)
[  250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> PairwiseEncAlgorithm = 0 GroupEncAlgorithm = 0
[  250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> The SECR-value cc
[  250.818472] rtl8192c_common:rtl92c_dm_check_txpower_tracking_thermal_meter():<0-1-0> Schedule TxPowerTracking direct call!!
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> rtl92c_dm_txpower_tracking_callback_thermalmeter
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial pathA ele_d reg0xc80 = 0x40000000, ofdm_index=0xc
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial reg0xa24 = 0x90e1317, cck_index=0xc, ch14 0
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf delta 0x1 delta_lck 0x0 delta_iqk 0x0
[  250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> <===
[  250.818472] rtl8192c_common:rtl92c_dm_initialize_txpower_tracking_thermalmeter():<0-1-0> pMgntInfo->txpower_tracking = 1
[  250.818472] rtl8192ce:rtl92ce_led_control():<0-1-0> ledaction 3
[  250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1
[  250.818472] rtlwifi:rtl_ips_nic_on():<0-1-0> before spin_unlock_irqrestore
[  251.154656] PCM: Lost interrupts? [Q]-0 (stream=0, delta=15903, new_hw_ptr=293408, old_hw_ptr=277505)

The exact code flow that causes that is:

1. wpa_supplicant send a start_scan request to the nl80211 driver
2. mac80211 module call rtl_op_config with IEEE80211_CONF_CHANGE_IDLE
3.   rtl_ips_nic_on is called which disable local irqs
4.     rtl92c_phy_set_rf_power_state() is called
5.       rtl_ps_enable_nic() is called and hw_init()is executed and then the interrupts on the device are enabled

A good solution could be to refactor the code to avoid calling rtl92ce_hw_init() with the irqs disabled
but a quick and dirty solution that has proven to work is
to reenable the irqs during the function rtl92ce_hw_init().

I think that it is safe doing so since the device interrupt will only be enabled after the init function succeed.

Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
26154ff
Olivier Langlois rtlwifi: Fix incorrect return from rtl_ps_enable_nic()
commit 2e8c5e5 upstream.

rtl_ps_enable_nic() is called from loops that will loop until this function returns true or a
maximum number of retries is performed.

hw_init() returns non-zero on error. In that situation return false to
restore the original design intent to retry hw init when it fails.

Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7154820
@Chen-Gang Chen-Gang avr32: Makefile: add '-D__linux__' flag for gcc-4.4.7 use
commit 8d80390 upstream.

For avr32 cross compiler, do not define '__linux__' internally, so it
will cause issue with allmodconfig.

The related error:

    CC [M]  fs/coda/psdev.o
  In file included from include/linux/coda.h:64,
                   from fs/coda/psdev.c:45:
  include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t'

The related toolchain version (which only download, not re-compile):

  [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v
  Using built-in specs.
  Target: avr32
  Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www
.atmel.com/avr
  Thread model: single
  gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435)

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
40684d7
Trond Myklebust NFS: Do not set NFS_INO_INVALID_LABEL unless server supports labeled NFS
commit fd1defc upstream.

Commit aa9c266 (NFS: Client implementation of Labeled-NFS) introduces
a performance regression. When nfs_zap_caches_locked is called, it sets
the NFS_INO_INVALID_LABEL flag irrespectively of whether or not the
NFS server supports security labels. Since that flag is never cleared,
it means that all calls to nfs_revalidate_inode() will now trigger
an on-the-wire GETATTR call.

This patch ensures that we never set the NFS_INO_INVALID_LABEL unless the
server advertises support for labeled NFS.
It also causes nfs_setsecurity() to clear NFS_INO_INVALID_LABEL when it
has successfully set the security label for the inode.
Finally it gets rid of the NFS_INO_INVALID_LABEL cruft from nfs_update_inode,
which has nothing to do with labeled NFS.

Reported-by: Neil Brown <neilb@suse.de>
Tested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fde4f2d
Stanislaw Gruszka rtl8187: fix regression on MIPS without coherent DMA
commit b6213e4 upstream.

This patch fixes regression caused by commit a16dad7 "MIPS: Fix
potencial corruption". That commit fixes one corruption scenario in
cost of adding another one, which actually start to cause crashes
on Yeeloong laptop when rtl8187 driver is used.

For correct DMA read operation on machines without DMA coherence, kernel
have to invalidate cache, such it will refill later with new data that
device wrote to memory, when that data is needed to process. We can only
invalidate full cache line. Hence when cache line includes both dma
buffer and some other data (written in cache, but not yet in main
memory), the other data can not hit memory due to invalidation. That
happen on rtl8187 where struct rtl8187_priv fields are located just
before and after small buffers that are passed to USB layer and DMA
is performed on them.

To fix the problem we align buffers and reserve space after them to make
them match cache line.

This patch does not resolve all possible MIPS problems entirely, for
that we have to assure that we always map cache aligned buffers for DMA,
what can be complex or even not possible. But patch fixes visible and
reproducible regression and seems other possible corruptions do not
happen in practice, since Yeeloong laptop works stable without rtl8187
driver.

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=54391

Reported-by: Petr Pisar <petr.pisar@atlas.cz>
Bisected-by: Tom Li <biergaizi2009@gmail.com>
Reported-and-tested-by: Tom Li <biergaizi2009@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Larry Finger <Larry.Finger@lwfinger.next>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e6b6066
Jeff Layton cifs: ensure that uncached writes handle unmapped areas correctly
commit 5d81de8 upstream.

It's possible for userland to pass down an iovec via writev() that has a
bogus user pointer in it. If that happens and we're doing an uncached
write, then we can end up getting less bytes than we expect from the
call to iov_iter_copy_from_user. This is CVE-2014-0069

cifs_iovec_write isn't set up to handle that situation however. It'll
blindly keep chugging through the page array and not filling those pages
with anything useful. Worse yet, we'll later end up with a negative
number in wdata->tailsz, which will confuse the sending routines and
cause an oops at the very least.

Fix this by having the copy phase of cifs_iovec_write stop copying data
in this situation and send the last write as a short one. At the same
time, we want to avoid sending a zero-length write to the server, so
break out of the loop and set rc to -EFAULT if that happens. This also
allows us to handle the case where no address in the iovec is valid.

[Note: Marking this for stable on v3.4+ kernels, but kernels as old as
       v2.6.38 may have a similar problem and may need similar fix]

Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
14afffb
Pavel Shilovsky CIFS: Fix too big maxBuf size for SMB3 mounts
commit 2365c4e upstream.

SMB3 servers can respond with MaxTransactSize of more than 4M
that can cause a memory allocation error returned from kmalloc
in a lock codepath. Also the client doesn't support multicredit
requests now and allows buffer sizes of 65536 bytes only. Set
MaxTransactSize to this maximum supported value.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4f7da6f
@hartkopp hartkopp can: add destructor for self generated skbs
[ Upstream commit 0ae89be ]

Self generated skbuffs in net/can/bcm.c are setting a skb->sk reference but
no explicit destructor which is enforced since Linux 3.11 with commit
376c731 (net: add a temporary sanity check in skb_orphan()).

This patch adds some helper functions to make sure that a destructor is
properly defined when a sock reference is assigned to a CAN related skb.
To create an unshared skb owned by the original sock a common helper function
has been introduced to replace open coded functions to create CAN echo skbs.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Andre Naujoks <nautsch2@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9d708b9
@geertu geertu ipv4: Fix runtime WARNING in rtmsg_ifa()
[ Upstream commit 63b5f15 ]

On m68k/ARAnyM:

WARNING: CPU: 0 PID: 407 at net/ipv4/devinet.c:1599 0x316a99()
Modules linked in:
CPU: 0 PID: 407 Comm: ifconfig Not tainted
3.13.0-atari-09263-g0c71d68014d1 #1378
Stack from 10c4fdf0:
        10c4fdf0 002ffabb 000243e8 00000000 008ced6c 00024416 00316a99 0000063f
        00316a99 00000009 00000000 002501b4 00316a99 0000063f c0a86117 00000080
        c0a86117 00ad0c90 00250a5a 00000014 00ad0c90 00000000 00000000 00000001
        00b02dd0 00356594 00000000 00356594 c0a86117 eff6c9e4 008ced6c 00000002
        008ced60 0024f9b4 00250b5 00ad0c90 00000000 00000000 00252390 00ad0c90
        eff6c9e4 0000004f 00000000 00000000 eff6c9e4 8000e25c eff6c9e4 80001020
Call Trace: [<000243e8>] warn_slowpath_common+0x52/0x6c
 [<00024416>] warn_slowpath_null+0x14/0x1a
 [<002501b4>] rtmsg_ifa+0xdc/0xf0
 [<00250a5a>] __inet_insert_ifa+0xd6/0x1c2
 [<0024f9b4>] inet_abc_len+0x0/0x42
 [<00250b52>] inet_insert_ifa+0xc/0x12
 [<00252390>] devinet_ioctl+0x2ae/0x5d6

Adding some debugging code reveals that net_fill_ifaddr() fails in

    put_cacheinfo(skb, ifa->ifa_cstamp, ifa->ifa_tstamp,
                              preferred, valid))

nla_put complains:

    lib/nlattr.c:454: skb_tailroom(skb) = 12, nla_total_size(attrlen) = 20

Apparently commit 5c766d6 ("ipv4:
introduce address lifetime") forgot to take into account the addition of
struct ifa_cacheinfo in inet_nlmsg_size(). Hence add it, like is already
done for ipv6.

Suggested-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4ca4b24
Cong Wang bridge: fix netconsole setup over bridge
[ Upstream commit dbe1730 ]

Commit 93d8bf9 ("bridge: cleanup netpoll code") introduced
a check in br_netpoll_enable(), but this check is incorrect for
br_netpoll_setup(). This patch moves the code after the check
into __br_netpoll_enable() and calls it in br_netpoll_setup().
For br_add_if(), the check is still needed.

Fixes: 93d8bf9 ("bridge: cleanup netpoll code")
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Tested-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5b7f619
@ryao ryao 9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers
[ Upstream commit b6f52ae ]

The 9p-virtio transport does zero copy on things larger than 1024 bytes
in size. It accomplishes this by returning the physical addresses of
pages to the virtio-pci device. At present, the translation is usually a
bit shift.

That approach produces an invalid page address when we read/write to
vmalloc buffers, such as those used for Linux kernel modules. Any
attempt to load a Linux kernel module from 9p-virtio produces the
following stack.

[<ffffffff814878ce>] p9_virtio_zc_request+0x45e/0x510
[<ffffffff814814ed>] p9_client_zc_rpc.constprop.16+0xfd/0x4f0
[<ffffffff814839dd>] p9_client_read+0x15d/0x240
[<ffffffff811c8440>] v9fs_fid_readn+0x50/0xa0
[<ffffffff811c84a0>] v9fs_file_readn+0x10/0x20
[<ffffffff811c84e7>] v9fs_file_read+0x37/0x70
[<ffffffff8114e3fb>] vfs_read+0x9b/0x160
[<ffffffff81153571>] kernel_read+0x41/0x60
[<ffffffff810c83ab>] copy_module_from_fd.isra.34+0xfb/0x180

Subsequently, QEMU will die printing:

qemu-system-x86_64: virtio: trying to map MMIO memory

This patch enables 9p-virtio to correctly handle this case. This not
only enables us to load Linux kernel modules off virtfs, but also
enables ZFS file-based vdevs on virtfs to be used without killing QEMU.

Special thanks to both Avi Kivity and Alexander Graf for their
interpretation of QEMU backtraces. Without their guidence, tracking down
this bug would have taken much longer. Also, special thanks to Linus
Torvalds for his insightful explanation of why this should use
is_vmalloc_addr() instead of is_vmalloc_or_module_addr():

https://lkml.org/lkml/2014/2/8/272

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6e03fb4
Eric Dumazet 6lowpan: fix lockdep splats
[ Upstream commit 20e7c4e ]

When a device ndo_start_xmit() calls again dev_queue_xmit(),
lockdep can complain because dev_queue_xmit() is re-entered and the
spinlocks protecting tx queues share a common lockdep class.

Same issue was fixed for bonding/l2tp/ppp in commits

0daa230 ("[PATCH] bonding: lockdep annotation")
49ee492 ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat")
23d3b8b ("net: qdisc busylock needs lockdep annotations ")
303c07d ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ")

Reported-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ece3c8a
@androsadamson androsadamson NFS fix error return in nfs4_select_rw_stateid
commit 146d70c upstream.

Do not return an error when nfs4_copy_delegation_stateid succeeds.

Signed-off-by: Andy Adamson <andros@netapp.com>
Link: http://lkml.kernel.org/r/1392737765-41942-1-git-send-email-andros@netapp.com
Fixes: ef1820f (NFSv4: Don't try to recover NFSv4 locks when...)
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
17f44a7
@bmork bmork net: qmi_wwan: add Netgear Aircard 340U
[ Upstream commit fbd3a77 ]

This device was mentioned in an OpenWRT forum.  Seems to have a "standard"
Sierra Wireless ifnumber to function layout:
 0: qcdm
 2: nmea
 3: modem
 8: qmi
 9: storage

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a64ca3b
Nithin Sujir tg3: Fix deadlock in tg3_change_mtu()
[ Upstream commit c6993df ]

Quoting David Vrabel -
"5780 cards cannot have jumbo frames and TSO enabled together.  When
jumbo frames are enabled by setting the MTU, the TSO feature must be
cleared.  This is done indirectly by calling netdev_update_features()
which will call tg3_fix_features() to actually clear the flags.

netdev_update_features() will also trigger a new netlink message for the
feature change event which will result in a call to tg3_get_stats64()
which deadlocks on the tg3 lock."

tg3_set_mtu() does not need to be under the tg3 lock since converting
the flags to use set_bit(). Move it out to after tg3_netif_stop().

Reported-by: David Vrabel <david.vrabel@citrix.com>
Tested-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a2e8bb5
@qsn qsn netpoll: fix netconsole IPv6 setup
[ Upstream commit 00fe11b ]

Currently, to make netconsole start over IPv6, the source address
needs to be specified. Without a source address, netpoll_parse_options
assumes we're setting up over IPv4 and the destination IPv6 address is
rejected.

Check if the IP version has been forced by a source address before
checking for a version mismatch when parsing the destination address.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e534620
@zenczykowski zenczykowski net: fix 'ip rule' iif/oif device rename
[ Upstream commit 946c032 ]

ip rules with iif/oif references do not update:
(detach/attach) across interface renames.

Signed-off-by: Maciej Żenczykowski <maze@google.com>
CC: Willem de Bruijn <willemb@google.com>
CC: Eric Dumazet <edumazet@google.com>
CC: Chris Davis <chrismd@google.com>
CC: Carlo Contavalli <ccontavalli@google.com>

Google-Bug-Id: 12936021
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
0ef4fe5
John Ogness tcp: tsq: fix nonagle handling
[ Upstream commit bf06200 ]

Commit 46d3cea ("tcp: TCP Small Queues") introduced a possible
regression for applications using TCP_NODELAY.

If TCP session is throttled because of tsq, we should consult
tp->nonagle when TX completion is done and allow us to send additional
segment, especially if this segment is not a full MSS.
Otherwise this segment is sent after an RTO.

[edumazet] : Cooked the changelog, added another fix about testing
sk_wmem_alloc twice because TX completion can happen right before
setting TSQ_THROTTLED bit.

This problem is particularly visible with recent auto corking,
but might also be triggered with low tcp_limit_output_bytes
values or NIC drivers delaying TX completion by hundred of usec,
and very low rtt.

Thomas Glanzmann for example reported an iscsi regression, caused
by tcp auto corking making this bug quite visible.

Fixes: 46d3cea ("tcp: TCP Small Queues")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc886b6
@mstsirkin mstsirkin vhost: fix ref cnt checking deadlock
[ Upstream commit 0ad8b48 ]

vhost checked the counter within the refcnt before decrementing.  It
really wanted to know that it is the one that has the last reference, as
a way to batch freeing resources a bit more efficiently.

Note: we only let refcount go to 0 on device release.

This works well but we now access the ref counter twice so there's a
race: all users might see a high count and decide to defer freeing
resources.
In the end no one initiates freeing resources until the last reference
is gone (which is on VM shotdown so might happen after a looooong time).

Let's do what we probably should have done straight away:
switch from kref to plain atomic, documenting the
semantics, return the refcount value atomically after decrement,
then use that to avoid the deadlock.

Reported-by: Qin Chuanyu <qinchuanyu@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a946f4c
@haiyangz haiyangz hyperv: Fix the carrier status setting
[ Upstream commit 891de74 ]

Without this patch, the "cat /sys/class/net/ethN/operstate" shows
"unknown", and "ethtool ethN" shows "Link detected: yes", when VM
boots up with or without vNIC connected.

This patch fixed the problem.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f7b4254
@emilgoode emilgoode usbnet: remove generic hard_header_len check
[ Upstream commit eb85569 ]

This patch removes a generic hard_header_len check from the usbnet
module that is causing dropped packages under certain circumstances
for devices that send rx packets that cross urb boundaries.

One example is the AX88772B which occasionally send rx packets that
cross urb boundaries where the remaining partial packet is sent with
no hardware header. When the buffer with a partial packet is of less
number of octets than the value of hard_header_len the buffer is
discarded by the usbnet module.

With AX88772B this can be reproduced by using ping with a packet
size between 1965-1976.

The bug has been reported here:

https://bugzilla.kernel.org/show_bug.cgi?id=29082

This patch introduces the following changes:
- Removes the generic hard_header_len check in the rx_complete
  function in the usbnet module.
- Introduces a ETH_HLEN check for skbs that are not cloned from
  within a rx_fixup callback.
- For safety a hard_header_len check is added to each rx_fixup
  callback function that could be affected by this change.
  These extra checks could possibly be removed by someone
  who has the hardware to test.
- Removes a call to dev_kfree_skb_any() and instead utilizes the
  dev->done list to queue skbs for cleanup.

The changes place full responsibility on the rx_fixup callback
functions that clone skbs to only pass valid skbs to the
usbnet_skb_return function.

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
34bf180
@emilgoode emilgoode net: asix: add missing flag to struct driver_info
[ Upstream commit d43ff4c ]

The struct driver_info ax88178_info is assigned the function
asix_rx_fixup_common as it's rx_fixup callback. This means that
FLAG_MULTI_PACKET must be set as this function is cloning the
data and calling usbnet_skb_return. Not setting this flag leads
to usbnet_skb_return beeing called a second time from within
the rx_process function in the usbnet module.

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7c3b169
@jiribohac jiribohac bonding: 802.3ad: make aggregator_identifier bond-private
[ Upstream commit 163c8ff ]

aggregator_identifier is used to assign unique aggregator identifiers
to aggregators of a bond during device enslaving.

aggregator_identifier is currently a global variable that is zeroed in
bond_3ad_initialize().

This sequence will lead to duplicate aggregator identifiers for eth1 and eth3:

create bond0
change bond0 mode to 802.3ad
enslave eth0 to bond0 		//eth0 gets agg id 1
enslave eth1 to bond0 		//eth1 gets agg id 2
create bond1
change bond1 mode to 802.3ad
enslave eth2 to bond1		//aggregator_identifier is reset to 0
				//eth2 gets agg id 1
enslave eth3 to bond0 		//eth3 gets agg id 2

Fix this by making aggregator_identifier private to the bond.

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bf3885d
@borkmann borkmann net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode
[ Upstream commit ffd5939 ]

SCTP's sctp_connectx() abi breaks for 64bit kernels compiled with 32bit
emulation (e.g. ia32 emulation or x86_x32). Due to internal usage of
'struct sctp_getaddrs_old' which includes a struct sockaddr pointer,
sizeof(param) check will always fail in kernel as the structure in
64bit kernel space is 4bytes larger than for user binaries compiled
in 32bit mode. Thus, applications making use of sctp_connectx() won't
be able to run under such circumstances.

Introduce a compat interface in the kernel to deal with such
situations by using a 'struct compat_sctp_getaddrs_old' structure
where user data is copied into it, and then sucessively transformed
into a 'struct sctp_getaddrs_old' structure with the help of
compat_ptr(). That fixes sctp_connectx() abi without any changes
needed in user space, and lets the SCTP test suite pass when compiled
in 32bit and run on 64bit kernels.

Fixes: f9c6781 ("sctp: Fix regression introduced by new sctp_connectx api")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2702045
Nicolas Dichtel gre: add link local route when local addr is any
[ Upstream commit 08b4465 ]

This bug was reported by Steinar H. Gunderson and was introduced by commit
f7cb888 ("sit/gre6: don't try to add the same route two times").

root@morgental:~# ip tunnel add foo mode gre remote 1.2.3.4 ttl 64
root@morgental:~# ip link set foo up mtu 1468
root@morgental:~# ip -6 route show dev foo
fe80::/64  proto kernel  metric 256

but after the above commit, no such route shows up.

There is no link local route because dev->dev_addr is 0 (because local ipv4
address is 0), hence no link local address is configured.

In this scenario, the link local address is added manually: 'ip -6 addr add
fe80::1 dev foo' and because prefix is /128, no link local route is added by the
kernel.

Even if the right things to do is to add the link local address with a /64
prefix, we need to restore the previous behavior to avoid breaking userpace.

Reported-by: Steinar H. Gunderson <sesse@samfundet.no>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
07eb46b
Duan Jiong ipv4: fix counter in_slow_tot
[ Upstream commit a625486 ]

since commit 89aef89("ipv4: Delete routing cache."), the counter
in_slow_tot can't work correctly.

The counter in_slow_tot increase by one when fib_lookup() return successfully
in ip_route_input_slow(), but actually the dst struct maybe not be created and
cached, so we can increase in_slow_tot after the dst struct is created.

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
0ef00f3
willy tarreau net: mvneta: increase the 64-bit rx/tx stats out of the hot path
[ Upstream commit dc4277d ]

Better count packets and bytes in the stack and on 32 bit then
accumulate them at the end for once. This saves two memory writes
and two memory barriers per packet. The incoming packet rate was
increased by 4.7% on the Openblocks AX3 thanks to this.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fbfbed3
willy tarreau net: mvneta: use per_cpu stats to fix an SMP lock up
[ Upstream commit 74c41b0 ]

Stats writers are mvneta_rx() and mvneta_tx(). They don't lock anything
when they update the stats, and as a result, it randomly happens that
the stats freeze on SMP if two updates happen during stats retrieval.
This is very easily reproducible by starting two HTTP servers and binding
each of them to a different CPU, then consulting /proc/net/dev in loops
during transfers, the interface should immediately lock up. This issue
also randomly happens upon link state changes during transfers, because
the stats are collected in this situation, but it takes more attempts to
reproduce it.

The comments in netdevice.h suggest using per_cpu stats instead to get
rid of this issue.

This patch implements this. It merges both rx_stats and tx_stats into
a single "stats" member with a single syncp. Both mvneta_rx() and
mvneta_rx() now only update the a single CPU's counters.

In turn, mvneta_get_stats64() does the summing by iterating over all CPUs
to get their respective stats.

With this change, stats are still correct and no more lockup is encountered.

Note that this bug was present since the first import of the mvneta
driver.  It might make sense to backport it to some stable trees. If
so, it depends on "d33dc73 net: mvneta: increase the 64-bit rx/tx stats
out of the hot path".

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9281733
willy tarreau net: mvneta: do not schedule in mvneta_tx_timeout
[ Upstream commit 2902136 ]

If a queue timeout is reported, we can oops because of some
schedules while the caller is atomic, as shown below :

  mvneta d0070000.ethernet eth0: tx timeout
  BUG: scheduling while atomic: bash/1528/0x00000100
  Modules linked in: slhttp_ethdiv(C) [last unloaded: slhttp_ethdiv]
  CPU: 2 PID: 1528 Comm: bash Tainted: G        WC   3.13.0-rc4-mvebu-nf #180
  [<c0011bd9>] (unwind_backtrace+0x1/0x98) from [<c000f1ab>] (show_stack+0xb/0xc)
  [<c000f1ab>] (show_stack+0xb/0xc) from [<c02ad323>] (dump_stack+0x4f/0x64)
  [<c02ad323>] (dump_stack+0x4f/0x64) from [<c02abe67>] (__schedule_bug+0x37/0x4c)
  [<c02abe67>] (__schedule_bug+0x37/0x4c) from [<c02ae261>] (__schedule+0x325/0x3ec)
  [<c02ae261>] (__schedule+0x325/0x3ec) from [<c02adb97>] (schedule_timeout+0xb7/0x118)
  [<c02adb97>] (schedule_timeout+0xb7/0x118) from [<c0020a67>] (msleep+0xf/0x14)
  [<c0020a67>] (msleep+0xf/0x14) from [<c01dcbe5>] (mvneta_stop_dev+0x21/0x194)
  [<c01dcbe5>] (mvneta_stop_dev+0x21/0x194) from [<c01dcfe9>] (mvneta_tx_timeout+0x19/0x24)
  [<c01dcfe9>] (mvneta_tx_timeout+0x19/0x24) from [<c024afc7>] (dev_watchdog+0x18b/0x1c4)
  [<c024afc7>] (dev_watchdog+0x18b/0x1c4) from [<c0020b53>] (call_timer_fn.isra.27+0x17/0x5c)
  [<c0020b53>] (call_timer_fn.isra.27+0x17/0x5c) from [<c0020cad>] (run_timer_softirq+0x115/0x170)
  [<c0020cad>] (run_timer_softirq+0x115/0x170) from [<c001ccb9>] (__do_softirq+0xbd/0x1a8)
  [<c001ccb9>] (__do_softirq+0xbd/0x1a8) from [<c001cfad>] (irq_exit+0x61/0x98)
  [<c001cfad>] (irq_exit+0x61/0x98) from [<c000d4bf>] (handle_IRQ+0x27/0x60)
  [<c000d4bf>] (handle_IRQ+0x27/0x60) from [<c000843b>] (armada_370_xp_handle_irq+0x33/0xc8)
  [<c000843b>] (armada_370_xp_handle_irq+0x33/0xc8) from [<c000fba9>] (__irq_usr+0x49/0x60)

Ben Hutchings attempted to propose a better fix consisting in using a
scheduled work for this, but while it fixed this panic, it caused other
random freezes and panics proving that the reset sequence in the driver
is unreliable and that additional fixes should be investigated.

When sending multiple streams over a link limited to 100 Mbps, Tx timeouts
happen from time to time, and the driver correctly recovers only when the
function is disabled.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8c2c9b1
Florian Westphal net: add and use skb_gso_transport_seglen()
commit de960aa upstream.

This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to
skbuff core so it may be reused by upcoming ip forwarding path patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f92583b
Florian Westphal net: core: introduce netif_skb_dev_features
commit d206940 upstream.

Will be used by upcoming ipv4 forward path change that needs to
determine feature mask using skb->dst->dev instead of skb->dev.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5a7e57c
Florian Westphal net: ip, ipv6: handle gso skbs in forwarding path
commit fe6cc55 upstream.

Marcelo Ricardo Leitner reported problems when the forwarding link path
has a lower mtu than the incoming one if the inbound interface supports GRO.

Given:
Host <mtu1500> R1 <mtu1200> R2

Host sends tcp stream which is routed via R1 and R2.  R1 performs GRO.

In this case, the kernel will fail to send ICMP fragmentation needed
messages (or pkt too big for ipv6), as GSO packets currently bypass dstmtu
checks in forward path. Instead, Linux tries to send out packets exceeding
the mtu.

When locking route MTU on Host (i.e., no ipv4 DF bit set), R1 does
not fragment the packets when forwarding, and again tries to send out
packets exceeding R1-R2 link mtu.

This alters the forwarding dstmtu checks to take the individual gso
segment lengths into account.

For ipv6, we send out pkt too big error for gso if the individual
segments are too big.

For ipv4, we either send icmp fragmentation needed, or, if the DF bit
is not set, perform software segmentation and let the output path
create fragments when the packet is leaving the machine.
It is not 100% correct as the error message will contain the headers of
the GRO skb instead of the original/segmented one, but it seems to
work fine in my (limited) tests.

Eric Dumazet suggested to simply shrink mss via ->gso_size to avoid
sofware segmentation.

However it turns out that skb_segment() assumes skb nr_frags is related
to mss size so we would BUG there.  I don't want to mess with it considering
Herbert and Eric disagree on what the correct behavior should be.

Hannes Frederic Sowa notes that when we would shrink gso_size
skb_segment would then also need to deal with the case where
SKB_MAX_FRAGS would be exceeded.

This uses sofware segmentation in the forward path when we hit ipv4
non-DF packets and the outgoing link mtu is too small.  Its not perfect,
but given the lack of bug reports wrt. GRO fwd being broken this is a
rare case anyway.  Also its not like this could not be improved later
once the dust settles.

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f715271
willy tarreau net: mvneta: add missing bit descriptions for interrupt masks and causes
[ Upstream commit 40ba35e ]

Marvell has not published the chip's datasheet yet, so it's very hard
to find the relevant bits to manipulate to change the IRQ behaviour.
Fortunately, these bits are described in the proprietary LSP patch set
which is publicly available here :

    http://www.plugcomputer.org/downloads/mirabox/

So let's put them back in the driver in order to reduce the burden of
current and future maintenance.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
0ce58ac
willy tarreau net: mvneta: replace Tx timer with a real interrupt
[ Upstream commit 71f6d1b ]

Right now the mvneta driver doesn't handle Tx IRQ, and relies on two
mechanisms to flush Tx descriptors : a flush at the end of mvneta_tx()
and a timer. If a burst of packets is emitted faster than the device
can send them, then the queue is stopped until next wake-up of the
timer 10ms later. This causes jerky output traffic with bursts and
pauses, making it difficult to reach line rate with very few streams.

A test on UDP traffic shows that it's not possible to go beyond 134
Mbps / 12 kpps of outgoing traffic with 1500-bytes IP packets. Routed
traffic tends to observe pauses as well if the traffic is bursty,
making it even burstier after the wake-up.

It seems that this feature was inherited from the original driver but
nothing there mentions any reason for not using the interrupt instead,
which the chip supports.

Thus, this patch enables Tx interrupts and removes the timer. It does
the two at once because it's not really possible to make the two
mechanisms coexist, so a split patch doesn't make sense.

First tests performed on a Mirabox (Armada 370) show that less CPU
seems to be used when sending traffic. One reason might be that we now
call the mvneta_tx_done_gbe() with a mask indicating which queues have
been done instead of looping over all of them.

The same UDP test above now happily reaches 987 Mbps / 87.7 kpps.
Single-stream TCP traffic can now more easily reach line rate. HTTP
transfers of 1 MB objects over a single connection went from 730 to
840 Mbps. It is even possible to go significantly higher (>900 Mbps)
by tweaking tcp_tso_win_divisor.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4f3a4f7
@ordex ordex batman-adv: fix soft-interface MTU computation
[ Upstream commit 930cd6e ]

The current MTU computation always returns a value
smaller than 1500bytes even if the real interfaces
have an MTU large enough to compensate the batman-adv
overhead.

Fix the computation by properly returning the highest
admitted value.

Introduced by a19d3d8
("batman-adv: limit local translation table max size")

Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5eaeaa7
@ordex ordex batman-adv: fix TT-TVLV parsing on OGM reception
[ Upstream commit e889241 ]

When accessing a TT-TVLV container in the OGM RX path
the variable pointing to the list of changes to apply is
altered by mistake.

This makes the TT component read data at the wrong position
in the OGM packet buffer.

Fix it by removing the bogus pointer alteration.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
658720a
@ordex ordex batman-adv: release vlan object after checking the CRC
[ Upstream commit 91c2b1a ]

There is a refcounter unbalance in the CRC checking routine
invoked on OGM reception. A vlan object is retrieved (thus
its refcounter is increased by one) but it is never properly
released. This leads to a memleak because the vlan object
will never be free'd.

Fix this by releasing the vlan object after having read the
CRC.

Reported-by: Russell Senior <russell@personaltelco.net>
Reported-by: Daniel <daniel@makrotopia.org>
Reported-by: cmsv <cmsv@wirelesspt.net>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
b6cd79c
Eric Dumazet net: use __GFP_NORETRY for high order allocations
[ Upstream commit ed98df3 ]

sock_alloc_send_pskb() & sk_page_frag_refill()
have a loop trying high order allocations to prepare
skb with low number of fragments as this increases performance.

Problem is that under memory pressure/fragmentation, this can
trigger OOM while the intent was only to try the high order
allocations, then fallback to order-0 allocations.

We had various reports from unexpected regressions.

According to David, setting __GFP_NORETRY should be fine,
as the asynchronous compaction is still enabled, and this
will prevent OOM from kicking as in :

CFSClientEventm invoked oom-killer: gfp_mask=0x42d0, order=3, oom_adj=0,
oom_score_adj=0, oom_score_badness=2 (enabled),memcg_scoring=disabled
CFSClientEventm

Call Trace:
 [<ffffffff8043766c>] dump_header+0xe1/0x23e
 [<ffffffff80437a02>] oom_kill_process+0x6a/0x323
 [<ffffffff80438443>] out_of_memory+0x4b3/0x50d
 [<ffffffff8043a4a6>] __alloc_pages_may_oom+0xa2/0xc7
 [<ffffffff80236f42>] __alloc_pages_nodemask+0x1002/0x17f0
 [<ffffffff8024bd23>] alloc_pages_current+0x103/0x2b0
 [<ffffffff8028567f>] sk_page_frag_refill+0x8f/0x160
 [<ffffffff80295fa0>] tcp_sendmsg+0x560/0xee0
 [<ffffffff802a5037>] inet_sendmsg+0x67/0x100
 [<ffffffff80283c9c>] __sock_sendmsg_nosec+0x6c/0x90
 [<ffffffff80283e85>] sock_sendmsg+0xc5/0xf0
 [<ffffffff802847b6>] __sys_sendmsg+0x136/0x430
 [<ffffffff80284ec8>] sys_sendmsg+0x88/0x110
 [<ffffffff80711472>] system_call_fastpath+0x16/0x1b
Out of Memory: Kill process 2856 (bash) score 9999 or sacrifice child

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7f35646
Antonio Quartulli batman-adv: avoid potential race condition when adding a new neighbour
[ Upstream commit 08bf0ed ]

When adding a new neighbour it is important to atomically
perform the following:
- check if the neighbour already exists
- append the neighbour to the proper list

If the two operations are not performed in an atomic context
it is possible that two concurrent insertions add the same
neighbour twice.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
45756c3
@ordex ordex batman-adv: properly check pskb_may_pull return value
[ Upstream commit f179142 ]

pskb_may_pull() returns 1 on success and 0 in case of failure,
therefore checking for the return value being negative does
not make sense at all.

This way if the function fails we will probably read beyond the current
skb data buffer. Fix this by doing the proper check.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7a2f20a
@simonwunderlich simonwunderlich batman-adv: fix potential orig_node reference leak
[ Upstream commit b2262df ]

Since batadv_orig_node_new() sets the refcount to two, assuming that
the calling function will use a reference for putting the orig_node into
a hash or similar, both references must be freed if initialization of
the orig_node fails. Otherwise that object may be leaked in that error
case.

Reported-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
456252d
Antonio Quartulli batman-adv: fix TT CRC computation by ensuring byte order
[ Upstream commit a30e22c ]

When computing the CRC on a 2byte variable the order of
the bytes obviously alters the final result. This means
that computing the CRC over the same value on two archs
having different endianess leads to different numbers.

The global and local translation table CRC computation
routine makes this mistake while processing the clients
VIDs. The result is a continuous CRC mismatching between
nodes having different endianess.

Fix this by converting the VID to Network Order before
processing it. This guarantees that every node uses the same
byte order.

Introduced by 7ea7b4a
("batman-adv: make the TT CRC logic VLAN specific")

Reported-by: Russel Senior <russell@personaltelco.net>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Tested-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
176890f
Antonio Quartulli batman-adv: free skb on TVLV parsing success
[ Upstream commit 05c3c8a ]

When the TVLV parsing routine succeed the skb is left
untouched thus leading to a memory leak.

Fix this by consuming the skb in case of success.

Introduced by ef26157
("batman-adv: tvlv - basic infrastructure")

Reported-by: Russel Senior <russell@personaltelco.net>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Tested-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d74be7e
@ordex ordex batman-adv: avoid double free when orig_node initialization fails
[ Upstream commit a5a5cb8 ]

In the failure path of the orig_node initialization routine
the orig_node->bat_iv.bcast_own field is free'd twice: first
in batadv_iv_ogm_orig_get() and then later in
batadv_orig_node_free_rcu().

Fix it by removing the kfree in batadv_iv_ogm_orig_get().

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3bf1677
@ordex ordex batman-adv: fix potential kernel paging error for unicast transmissions
[ Upstream commit 70b271a ]

batadv_send_skb_prepare_unicast(_4addr) might reallocate the
skb's data. If it does then our ethhdr pointer is not valid
anymore in batadv_send_skb_unicast(), resulting in a kernel
paging error.

Fixing this by refetching the ethhdr pointer after the
potential reallocation.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
944734c
Tejun Heo cgroup: fix error return value in cgroup_mount()
commit eb46bf8 upstream.

When cgroup_mount() fails to allocate an id for the root, it didn't
set ret before jumping to unlock_drop ending up returning 0 after a
failure.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
95efbc2
Tejun Heo cgroup: fix error return from cgroup_create()
commit b58c899 upstream.

cgroup_create() was returning 0 after allocation failures.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a68fc0c
@cladisch cladisch ALSA: usb-audio: work around KEF X300A firmware bug
commit 624aef4 upstream.

When the driver tries to access Function Unit 10, the KEF X300A
speakers' firmware apparently locks up, making even PCM streaming
impossible.  Work around this by ignoring this FU.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
906e84c
Hui Wang ALSA: hda - add headset mic detect quirks for two Dell laptops
commit 4913e0b upstream.

When we plug a 3-ring headset on the Dell machines (Vendor ID:
0x10ec0255, Subsystem ID: 0x10280657; Vendor ID: 0x10ec0255,
Subsystem ID: 0x1028065f), the headset mic can't be
detected, after apply this patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1260303
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1862d8b
Hsin-Yu Chao ALSA: hda/ca0132 - setup/cleanup streams
commit 28fba95 upstream.

When a HDMI stream is opened with the same stream tag
as a following opened stream to ca0132, audio will be
heard from two ports simultaneously.
Fix this issue by change to use snd_hda_codec_setup_stream
and snd_hda_codec_cleanup_stream instead, so that an
inactive stream can be marked as 'dirty' when found
with a conflict stream tag, and then get purified.

Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Reviewed-by: Chih-Chung Chang <chihchung@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aadc011
Hsin-Yu Chao ALSA: hda/ca0132 - Fix recording from mode id 0x8
commit 13c12db upstream.

Incorrect ADC is picked in ca0132_capture_pcm_prepare(),
where it assumes multiple streams while there is one stream
per ADC. Note that ca0132_capture_pcm_cleanup() already does
the right thing.

The Chromebook Pixel has a microphone under the keyboard that
is attached to node id 0x8. Before this fix, recording would
always go to the main internal mic (node id 0x7).

Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1ac7009
Hui Wang ALSA: hda - Enable front audio jacks on one HP desktop model
commit 1de7ca5 upstream.

The front headphone and mic jackes on a HP desktop model (Vendor Id:
0x111d76c7 Subsystem Id: 0x103c2b17) can not work, the codec on this
machine has 8 physical ports, 6 of them are routed to rear jackes
and all of them work very well, while the remaining 2 ports are
routed to front headphone and mic jackes, but the corresponding
pin complex node are not defined correctly.

After apply this fix, the front audio jackes can work very well.

[trivial fix of enum definition by tiwai]

BugLink: https://bugs.launchpad.net/bugs/1282369
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: Gerald Yang <gerald.yang@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3a9c76c
Christoph Hellwig fs: fix iversion handling
commit dff6efc upstream.

Currently notify_change directly updates i_version for size updates,
which not only is counter to how all other fields are updated through
struct iattr, but also breaks XFS, which need inode updates to happen
under its own lock, and synchronized to the structure that gets written
to the log.

Remove the update in the common code, and it to btrfs and ext4,
XFS already does a proper updaste internally and currently gets a
double update with the existing code.

IMHO this is 3.13 and -stable material and should go in through the XFS
tree.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
74cec31
@jmberg jmberg export: declare ksymtab symbols
commit 7b4ec8d upstream.

sparse complains about any __ksymtab symbols with the following:

 warning: symbol '__ksymtab_...' was not declared. Should it be static?

due to Andi's patch making it non-static.

Mollify sparse by declaring the symbol extern, otherwise we get
drowned in sparse warnings for anything that uses EXPORT_SYMBOL
in the sources, making it easy to miss real warnings.

Fixes: e0f244c ("asmlinkage, module: Make ksymtab [...] __visible")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
19d23c2
Adam Thomson ASoC: da9055: Fix device registration of PMIC and CODEC devices
commit 07b0e5b upstream.

Currently the I2C device Ids conflict for the MFD and CODEC so
cannot be both instantiated on one platform. This patch updates
the Ids and names to make them unique from each other.

It should be noted that the I2C addresses for both PMIC and CODEC
are modifiable so instantiation of the two are kept as separate
devices, rather than instantiating the CODEC from the MFD code.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a0d6c7a
Tejun Heo cgroup: fix locking in cgroup_cfts_commit()
commit 48573a8 upstream.

cgroup_cfts_commit() walks the cgroup hierarchy that the target
subsystem is attached to and tries to apply the file changes.  Due to
the convolution with inode locking, it can't keep cgroup_mutex locked
while iterating.  It currently holds only RCU read lock around the
actual iteration and then pins the found cgroup using dget().

Unfortunately, this is incorrect.  Although the iteration does check
cgroup_is_dead() before invoking dget(), there's nothing which
prevents the dentry from going away inbetween.  Note that this is
different from the usual css iterations where css_tryget() is used to
pin the css - css_tryget() tests whether the css can be pinned and
fails if not.

The problem can be solved by simply holding cgroup_mutex instead of
RCU read lock around the iteration, which actually reduces LOC.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3c9c65d
Tejun Heo cgroup: update cgroup_enable_task_cg_lists() to grab siglock
commit 532de3f upstream.

Currently, there's nothing preventing cgroup_enable_task_cg_lists()
from missing set PF_EXITING and race against cgroup_exit().  Depending
on the timing, cgroup_exit() may finish with the task still linked on
css_set leading to list corruption.  Fix it by grabbing siglock in
cgroup_enable_task_cg_lists() so that PF_EXITING is guaranteed to be
visible.

This whole on-demand cg_list optimization is extremely fragile and has
ample possibility to lead to bugs which can cause things like
once-a-year oops during boot.  I'm wondering whether the better
approach would be just adding "cgroup_disable=all" handling which
disables the whole cgroup rather than tempting fate with this
on-demand craziness.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
432564b
Andrew Honig kvm: x86: fix emulator buffer overflow (CVE-2014-0049)
commit a08d3b3 upstream.

The problem occurs when the guest performs a pusha with the stack
address pointing to an mmio address (or an invalid guest physical
address) to start with, but then extending into an ordinary guest
physical address.  When doing repeated emulated pushes
emulator_read_write sets mmio_needed to 1 on the first one.  On a
later push when the stack points to regular memory,
mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0.

As a result, KVM exits to userspace, and then returns to
complete_emulated_mmio.  In complete_emulated_mmio
vcpu->mmio_cur_fragment is incremented.  The termination condition of
vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved.
The code bounces back and fourth to userspace incrementing
mmio_cur_fragment past it's buffer.  If the guest does nothing else it
eventually leads to a a crash on a memcpy from invalid memory address.

However if a guest code can cause the vm to be destroyed in another
vcpu with excellent timing, then kvm_clear_async_pf_completion_queue
can be used by the guest to control the data that's pointed to by the
call to cancel_work_item, which can be used to gain execution.

Fixes: f78146b
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
74e1995
@bonzini bonzini kvm, vmx: Really fix lazy FPU on nested guest
commit 1b385cb upstream.

Commit e504c90 (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.

nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup.  In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.

The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.

Fixes: e504c90
Reported-by: Kashyap Chamarty <kchamart@redhat.com>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Tested-by: Kashyap Chamarty <kchamart@redhat.com>
Tested-by: Anthoine Bourgeois <bourgeois@bertin.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
92cb6f3
@jhnikula jhnikula ASoC: rt5640: Add ACPI ID for Intel Baytrail
commit b31b2b6 upstream.

Realtek RT5640 uses ACPI ID "10EC5640" for Intel Baytrail platforms.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6699503
Shawn Guo ASoC: fsl: fix pm support of machine drivers
commit 47cf84e upstream.

The commit 1abe729 (ASoC: fsl: Add missing pm to current machine
drivers) enables pm support for a few IMX machine drivers.  But it does
not update dev drvdata to be the pointer to 'card'.  This causes the
kernel dump below in system suspend, because snd_soc_suspend() expects
that the dev drvdata points to 'card', while it still points to the
private data of machine driver.

This patch fixes imx-sgtl5000 and imx-wm8962 by attaching 'card' to dev
drvdata and private data to card drvdata.  For imx-mc13783, I simply
revert the pm change because it must be broken for the same reason and
I don't have hardware to test pm enabling code.

$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
mmc1: card e624 removed
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
PM: Entering mem sleep
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 1861 Comm: bash Not tainted 3.14.0-rc1+ #1648
Backtrace:
[<80012144>] (dump_backtrace) from [<800122e4>] (show_stack+0x18/0x1c)
 r6:8079c77c r5:00000c5a r4:00000000 r3:00000000
[<800122cc>] (show_stack) from [<80637ac0>] (dump_stack+0x78/0x94)
[<80637a48>] (dump_stack) from [<80028918>] (warn_slowpath_common+0x6c/0x8c)
 r4:bdb21c38 r3:be62df00
[<800288ac>] (warn_slowpath_common) from [<800289dc>] (warn_slowpath_fmt+0x38/0x40)
 r8:be62e3a8 r7:bf122960 r6:00000005 r5:00000000 r4:00000000
[<800289a8>] (warn_slowpath_fmt) from [<8006518c>] (__lock_acquire+0x1ae0/0x1ce0)
 r3:8079d598 r2:80799e70
[<800636ac>] (__lock_acquire) from [<80065894>] (lock_acquire+0x68/0x7c)
 r10:bdb20000 r9:be62df00 r8:00000000 r7:00000000 r6:60000013 r5:bdb20000
 r4:00000000
[<8006582c>] (lock_acquire) from [<8063c938>] (mutex_lock_nested+0x5c/0x3b8)
 r7:00000000 r6:80dfc78c r5:804be444 r4:bf122928
[<8063c8dc>] (mutex_lock_nested) from [<804be444>] (snd_soc_suspend+0x34/0x42c)
 r10:00000000 r9:00000000 r8:00000000 r7:bf1c4444 r6:bf1c4410 r5:be978150
 r4:be978010
[<804be410>] (snd_soc_suspend) from [<8034392c>] (platform_pm_suspend+0x34/0x64)
 r10:00000000 r8:00000000 r7:bf1c4444 r6:bf1c4410 r5:803438f8 r4:bf1c4410
[<803438f8>] (platform_pm_suspend) from [<80348e18>] (dpm_run_callback.isra.7+0x34/0x6c)
[<80348de4>] (dpm_run_callback.isra.7) from [<80349354>] (__device_suspend+0x10c/0x220)
 r9:808dd974 r8:808c4a5c r6:00000002 r5:80e5001c r4:bf1c4410
[<80349248>] (__device_suspend) from [<8034a338>] (dpm_suspend+0x60/0x220)
 r7:bf1c4410 r6:808dd90c r5:80e5001c r4:bf1c44c0
[<8034a2d8>] (dpm_suspend) from [<8034a790>] (dpm_suspend_start+0x60/0x68)
 r10:8079a818 r9:00000000 r8:00000004 r7:80dfbe90 r6:80641eec r5:00000000
 r4:00000002
[<8034a730>] (dpm_suspend_start) from [<8006a788>] (suspend_devices_and_enter+0x74/0x318)
 r4:00000003 r3:80dfbe98
[<8006a714>] (suspend_devices_and_enter) from [<8006abd8>] (pm_suspend+0x1ac/0x244)
 r10:8079a818 r8:00000004 r7:00000003 r6:80641eec r5:00000000 r4:00000003
[<8006aa2c>] (pm_suspend) from [<80069a4c>] (state_store+0x70/0xc0)
 r5:00000003 r4:bd85ea40
[<800699dc>] (state_store) from [<80294034>] (kobj_attr_store+0x1c/0x28)
 r10:beb9fe08 r8:00000000 r7:bdb21f78 r6:bd85ea40 r5:00000004 r4:beb9fe00
[<80294018>] (kobj_attr_store) from [<80140f90>] (sysfs_kf_write+0x54/0x58)
[<80140f3c>] (sysfs_kf_write) from [<8014474c>] (kernfs_fop_write+0xc4/0x160)
 r6:bd85ea40 r5:beb9fe00 r4:00000004 r3:80140f3c
[<80144688>] (kernfs_fop_write) from [<800dfa14>] (vfs_write+0xbc/0x184)
 r10:00000000 r9:00000000 r8:00000000 r7:bdb21f78 r6:00500c08 r5:00000004
 r4:be782600
[<800df958>] (vfs_write) from [<800dfe00>] (SyS_write+0x48/0x70)
 r10:00000000 r8:00000000 r7:00000004 r6:00500c08 r5:00000000 r4:be782600
[<800dfdb8>] (SyS_write) from [<8000e800>] (ret_fast_syscall+0x0/0x48)
 r9:bdb20000 r8:8000e9c4 r7:00000004 r6:00500c08 r5:00000004 r4:76eb65e0

Fixes: 1abe729 (ASoC: fsl: Add missing pm to current machine drivers)
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8a34335
Dylan Reid ASoC: max98090: sync regcache on entering STANDBY
commit c42c892 upstream.

Sync regcache when entering STANDBY from OFF.  ON isn't entered with
OFF as the current state, so the registers were not being re-synced
after suspend/resume.

The 98088 and 98095 already call regcache_sync from STANDBY.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
315881c
@shcgit shcgit ASoC: txx9aclc_ac97: Fix kernel crash on probe
commit 9febd49 upstream.

This patch fixes a crash caused by commit 3bed334
(ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()).
This is an attempt to assign "drvdata->base" while memory
for "drvdata" is not already allocated.

Fixes: 3bed334 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource())
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aa4d50b
@tiwai tiwai ASoC: wm8770: Fix wrong number of enum items
commit 7a6c0a5 upstream.

wm8770 codec driver defines ain_enum with a wrong number of items.

Use SOC_ENUM_DOUBLE_DECL() macro and it's automatically fixed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10918de
@broonie broonie ASoC: da732x: Mark DC offset control registers volatile
commit 7530682 upstream.

The driver reads from the DC offset control registers during callibration
but since the registers are marked as volatile and there is a register
cache the values will not be read from the hardware after the first reading
rendering the callibration ineffective.

It appears that the driver was originally written for the ASoC level
register I/O code but converted to regmap prior to merge and this issue
was missed during the conversion as the framework level volatile register
functionality was not being used.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e884073
Trond Myklebust SUNRPC: Fix races in xs_nospace()
commit 06ea0bf upstream.

When a send failure occurs due to the socket being out of buffer space,
we call xs_nospace() in order to have the RPC task wait until the
socket has drained enough to make it worth while trying again.
The current patch fixes a race in which the socket is drained before
we get round to setting up the machinery in xs_nospace(), and which
is reported to cause hangs.

Link: http://lkml.kernel.org/r/20140210170315.33dfc621@notabene.brown
Fixes: a9a6b52 (SUNRPC: Don't start the retransmission timer...)
Reported-by: Neil Brown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a57401e
Trond Myklebust SUNRPC: Ensure that gss_auth isn't freed before its upcall messages
commit 9eb2ddb upstream.

Fix a race in which the RPC client is shutting down while the
gss daemon is processing a downcall. If the RPC client manages to
shut down before the gss daemon is done, then the struct gss_auth
used in gss_release_msg() may have already been freed.

Link: http://lkml.kernel.org/r/1392494917.71728.YahooMailNeo@web140002.mail.bf1.yahoo.com
Reported-by: John <da_audiophile@yahoo.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
620ec68
@tiwai tiwai ASoC: sta32x: Fix array access overflow
commit 025c3fa upstream.

Preset EQ enum of sta32x codec driver declares too many number of
items and it may lead to the access over the actual array size.

Use SOC_ENUM_SINGLE_DECL() helper and it's automatically fixed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
580a251
@larsclausen larsclausen ASoC: sta32x: Fix cache sync
commit 70ff00f upstream.

codec->control_data contains a pointer to the regmap struct of the device, not
to the device private data. Use snd_soc_codec_get_drvdata() instead.

The issue was introduced in commit 29fdf4f ("ASoC: sta32x: Convert to
regmap").

Fixes: 29fdf4f (ASoC: sta32x: Convert to regmap)
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a44aeef
@larsclausen larsclausen ASoC: wm8958-dsp: Fix firmware block loading
commit 548da08 upstream.

The codec->control_data contains a pointer to the device's regmap struct. But
wm8994_bulk_write() expects a pointer to the parent wm8998 device.

The issue was introduced in commit d9a7666 ("ASoC: Remove ASoC-specific
WM8994 I/O code").

Fixes: d9a7666 ("ASoC: Remove ASoC-specific WM8994 I/O code")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
89fe406
@paulusmack paulusmack powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
commit 573ebfa upstream.

The new ELFv2 little-endian ABI increases the stack redzone -- the
area below the stack pointer that can be used for storing data --
from 288 bytes to 512 bytes.  This means that we need to allow more
space on the user stack when delivering a signal to a 64-bit process.

To make the code a bit clearer, we define new USER_REDZONE_SIZE and
KERNEL_REDZONE_SIZE symbols in ptrace.h.  For now, we leave the
kernel redzone size at 288 bytes, since increasing it to 512 bytes
would increase the size of interrupt stack frames correspondingly.

Gcc currently only makes use of 288 bytes of redzone even when
compiling for the new little-endian ABI, and the kernel cannot
currently be compiled with the new ABI anyway.

In the future, hopefully gcc will provide an option to control the
amount of redzone used, and then we could reduce it even more.

This also changes the code in arch_compat_alloc_user_space() to
preserve the expanded redzone.  It is not clear why this function would
ever be used on a 64-bit process, though.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a5a6c18
@tiwai tiwai ASoC: sta32x: Fix wrong enum for limiter2 release rate
commit b3619b2 upstream.

There is a typo in the Limiter2 Release Rate control, a wrong enum for
Limiter1 is assigned.  It must point to Limiter2.
Spotted by a compile warning:

In file included from sound/soc/codecs/sta32x.c:34:0:
sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable]
 static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
                             ^
include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’
  struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
                  ^
sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’
 static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
        ^

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e6c7dcb
Marek Szyprowski x86: dma-mapping: fix GFP_ATOMIC macro usage
commit c091c71 upstream.

GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other
flags, where meaningful is the LACK of __GFP_WAIT flag. To check if caller
wants to perform an atomic allocation, the code must test for a lack of the
__GFP_WAIT flag. This patch fixes the issue introduced in v3.5-rc1.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8e7b7d3
Arnaldo Carvalho de Melo perf trace: Fix ioctl 'request' beautifier build problems on !(i386 |…
…| x86_64) arches

commit 844ae5b upstream.

Supporting decoding the ioctl 'request' parameter needs more work to
properly support more architectures, the current approach doesn't work
on at least powerpc and sparc, as reported by Ben Hutchings in
http://lkml.kernel.org/r/1391593985.3003.48.camel@deadeye.wl.decadent.org.uk .

Work around that by making it to be ifdefed for the architectures known
to work with the current, limited approach, i386 and x86_64 till better
code is written.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ss04k11insqlu329xh5g02q0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3f584e7
@levex levex ahci: disable NCQ on Samsung pci-e SSDs on macbooks
commit 67809f8 upstream.

Samsung's pci-e SSDs with device ID 0x1600 which are found on some
macbooks time out on NCQ commands.  Blacklist NCQ on the device so
that the affected machines can at least boot.

Original-patch-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60731
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e9952c7
@tbreeds tbreeds powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
commit 41dd03a upstream.

Currently we're storing a host endian RTAS token in
rtas_stop_self_args.token.  We then pass that directly to rtas.  This is
fine on big endian however on little endian the token is not what we
expect.

This will typically result in hitting:
	panic("Alas, I survived.\n");

To fix this we always use the stop-self token in host order and always
convert it to be32 before passing this to rtas.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
26e0d6e
@ldu4 ldu4 powerpc/crashdump : Fix page frame number check in copy_oldmem_page
commit f5295bd upstream.

In copy_oldmem_page, the current check using max_pfn and min_low_pfn to
decide if the page is backed or not, is not valid when the memory layout is
not continuous.

This happens when running as a QEMU/KVM guest, where RTAS is mapped higher
in the memory. In that case max_pfn points to the end of RTAS, and a hole
between the end of the kdump kernel and RTAS is not backed by PTEs. As a
consequence, the kdump kernel is crashing in copy_oldmem_page when accessing
in a direct way the pages in that hole.

This fix relies on the memblock's service memblock_is_region_memory to
check if the read page is part or not of the directly accessible memory.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
64200db
@ozbenh ozbenh powerpc/powernv: Fix opal_xscom_{read,write} prototype
commit 2f3f38e upstream.

The OPAL firmware functions opal_xscom_read and opal_xscom_write
take a 64-bit argument for the XSCOM (PCB) address in order to
support the indirect mode on P8.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9ccd6c7
@ozbenh ozbenh powerpc/powernv: Fix indirect XSCOM unmangling
commit e0cf957 upstream.

We need to unmangle the full address, not just the register
number, and we also need to support the real indirect bit
being set for in-kernel uses.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8a526d9
Denis V. Lunev ata: enable quirk from jmicron JMB350 for JMB394
commit efb9e0f upstream.

Without the patch the kernel generates the following error.

 ata11.15: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
 ata11.15: Port Multiplier vendor mismatch '0x197b' != '0x123'
 ata11.15: PMP revalidation failed (errno=-19)
 ata11.15: failed to recover PMP after 5 tries, giving up

This patch helps to bypass this error and the device becomes
functional.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: <linux-ide@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
352ab49
Tejun Heo sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYN
commit 9f9c47f upstream.

It's a bit odd to see a newer device showing mod15write; however, the
reported behavior is highly consistent and other factors which could
contribute seem to have been verified well enough.  Also, both
sata_sil itself and the drive are fairly outdated at this point making
the risk of this change fairly low.  It is possible, probably likely,
that other drive models in the same family have the same problem;
however, for now, let's just add the specific model which was tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: matson <lists-matsonpa@luxsci.me>
References: http://lkml.kernel.org/g/201401211912.s0LJCk7F015058@rs103.luxsci.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2263f03
@lunn lunn PCI: mvebu: Use Device ID and revision from underlying endpoint
commit 322a8e9 upstream.

Marvell SoCs place the SoC number into the PCIe endpoint device ID.  The
SoC stepping is placed into the PCIe revision. The old plat-orion PCIe
driver allowed this information to be seen in user space with a simple
lspci command.

The new driver places a virtual PCI-PCI bridge on top of these endpoints.
It has its own hard coded PCI device ID. Thus it is no longer possible to
see what the SoC is using lspci.

When initializing the PCI-PCI bridge, set its device ID and revision from
the underlying endpoint, thus restoring this functionality.  Debian would
like to use this in order to aid installing the correct DTB file.

Fixes: 45361a4 ("pci: PCIe driver for Marvell Armada 370/XP systems")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9984691
@bjorn-helgaas bjorn-helgaas PCI: Enable INTx if BIOS left them disabled
commit 1f42db7 upstream.

Some firmware leaves the Interrupt Disable bit set even if the device uses
INTx interrupts.  Clear Interrupt Disable so we get those interrupts.

Based on the report mentioned below, if the user selects the "EHCI only"
option in the Intel Baytrail BIOS, the EHCI device is handed off to the OS
with the PCI_COMMAND_INTX_DISABLE bit set.

Link: http://lkml.kernel.org/r/20140114181721.GC12126@xanatos
Link: https://bugzilla.kernel.org/show_bug.cgi?id=70601
Reported-by: Chris Cheng <chris.cheng@atrustcorp.com>
Reported-and-tested-by: Jamie Chen <jamie.chen@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3404ec3
@srivatsabhat srivatsabhat cpufreq: powernow-k8: Initialize per-cpu data-structures properly
commit c327476 upstream.

The powernow-k8 driver maintains a per-cpu data-structure called
powernow_data that is used to perform the frequency transitions.
It initializes this data structure only for the policy->cpu. So,
accesses to this data structure by other CPUs results in various
problems because they would have been uninitialized.

Specifically, if a cpu (!= policy->cpu) invokes the drivers' ->get()
function, it returns 0 as the KHz value, since its per-cpu memory
doesn't point to anything valid. This causes problems during
suspend/resume since cpufreq_update_policy() tries to enforce this
(0 KHz) as the current frequency of the CPU, and this madness gets
propagated to adjust_jiffies() as well. Eventually, lots of things
start breaking down, including the r8169 ethernet card, in one
particularly interesting case reported by Pierre Ossman.

Fix this by initializing the per-cpu data-structures of all the CPUs
in the policy appropriately.

References: https://bugzilla.kernel.org/show_bug.cgi?id=70311
Reported-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
c6c54cb
@jankara jankara Revert "writeback: do not sync data dirtied after sync start"
commit 0dc83bd upstream.

This reverts commit c4a391b. Dave
Chinner <david@fromorbit.com> has reported the commit may cause some
inodes to be left out from sync(2). This is because we can call
redirty_tail() for some inode (which sets i_dirtied_when to current time)
after sync(2) has started or similarly requeue_inode() can set
i_dirtied_when to current time if writeback had to skip some pages. The
real problem is in the functions clobbering i_dirtied_when but fixing
that isn't trivial so revert is a safer choice for now.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2d05bc2
Peter Zijlstra perf/x86: Fix event scheduling
commit 26e61e8 upstream.

Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures,
with perf WARN_ON()s triggering. He also provided traces of the failures.

This is I think the relevant bit:

	>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_disable: x86_pmu_disable
	>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_state: Events: {
	>    pec_1076_warn-2804  [000] d...   147.926156: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
	>    pec_1076_warn-2804  [000] d...   147.926158: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926159: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1
	>    pec_1076_warn-2804  [000] d...   147.926161: x86_pmu_state: Assignment: {
	>    pec_1076_warn-2804  [000] d...   147.926162: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926163: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926166: collect_events: Adding event: 1 (ffff880119ec8800)

So we add the insn:p event (fd[23]).

At this point we should have:

  n_events = 2, n_added = 1, n_txn = 1

	>    pec_1076_warn-2804  [000] d...   147.926170: collect_events: Adding event: 0 (ffff8800c9e01800)
	>    pec_1076_warn-2804  [000] d...   147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00)

We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]).
These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so
that's not visible.

	group_sched_in()
	  pmu->start_txn() /* nop - BP pmu */
	  event_sched_in()
	     event->pmu->add()

So here we should end up with:

  0: n_events = 3, n_added = 2, n_txn = 2
  4: n_events = 4, n_added = 3, n_txn = 3

But seeing the below state on x86_pmu_enable(), the must have failed,
because the 0 and 4 events aren't there anymore.

Looking at group_sched_in(), since the BP is the leader, its
event_sched_in() must have succeeded, for otherwise we would not have
seen the sibling adds.

But since neither 0 or 4 are in the below state; their event_sched_in()
must have failed; but I don't see why, the complete state: 0,0,1:p,4
fits perfectly fine on a core2.

However, since we try and schedule 4 it means the 0 event must have
succeeded!  Therefore the 4 event must have failed, its failure will
have put group_sched_in() into the fail path, which will call:

	event_sched_out()
	  event->pmu->del()

on 0 and the BP event.

Now x86_pmu_del() will reduce n_events; but it will not reduce n_added;
giving what we see below:

 n_event = 2, n_added = 2, n_txn = 2

	>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_enable: x86_pmu_enable
	>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_state: Events: {
	>    pec_1076_warn-2804  [000] d...   147.926179: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
	>    pec_1076_warn-2804  [000] d...   147.926181: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926182: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2
	>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: Assignment: {
	>    pec_1076_warn-2804  [000] d...   147.926186: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state:   1->0 tag: 1 config: 1 (ffff880119ec8800)
	>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0

So the problem is that x86_pmu_del(), when called from a
group_sched_in() that fails (for whatever reason), and without x86_pmu
TXN support (because the leader is !x86_pmu), will corrupt the n_added
state.

Reported-and-Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ae614b0
Tomasz Nowicki ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()
commit b685f3b upstream.

acpi_pci_link_allocate_irq() can return negative gsi even if
entry != NULL.  For that case we have a memory leak, so free
entry before returning from acpi_pci_irq_enable() for gsi < 0.

Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
276826b
@oso oso can: kvaser_usb: check number of channels returned by HW
commit 862474f upstream.

It is needed to check the number of channels returned by the HW because it
cannot be greater than MAX_NET_DEVICES otherwise it will crash.

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a122e1f
Dirk Brandewie intel_pstate: Use LFM bus ratio as min ratio/P state
commit 4042e75 upstream.

LFM (max efficiency ratio) is the max frequency at minimum voltage
supported by the processor.  Using LFM as the minimum P state
increases performmance without affecting power. By not using P states
below LFM we avoid using P states that are less power efficient.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
55e02d0
@jwrdegoede jwrdegoede ACPI / video: Filter the _BCL table for duplicate brightness values
commit bd8ba20 upstream.

Some devices have duplicate entries in there brightness levels table, ie
on my Dell Latitude E6430 the table looks like this:

[    3.686060] acpi backlight index   0, val 80
[    3.686095] acpi backlight index   1, val 50
[    3.686122] acpi backlight index   2, val 5
[    3.686147] acpi backlight index   3, val 5
[    3.686172] acpi backlight index   4, val 5
[    3.686197] acpi backlight index   5, val 5
[    3.686223] acpi backlight index   6, val 5
[    3.686248] acpi backlight index   7, val 5
[    3.686273] acpi backlight index   8, val 6
[    3.686332] acpi backlight index   9, val 7
[    3.686356] acpi backlight index  10, val 8
[    3.686380] acpi backlight index  11, val 9
etc.

Notice that brightness values 0-5 are all mapped to 5. This means that
if userspace writes any value between 0 and 5 to the brightness sysfs attribute
and then reads it, it will always return 0, which is somewhat unexpected.

This is a problem for ie gnome-settings-daemon, which uses read-modify-write
logic when the users presses the brightness up or down keys. This is done
this way to take brightness changes from other sources into account.

On this specific laptop what happens once the brightness has been set to 0,
is that gsd reads 0, adds 5, writes 5, and on the next brightness up key press
again reads 0, so things get stuck at the lowest brightness setting.

Filtering out the duplicate table entries, makes any write to brightness
read back as the written value as one would expect, fixing this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
55cd2c6
@jdelvare jdelvare i7core_edac: Fix PCI device reference count
commit c0f5eee upstream.

The reference count changes done by pci_get_device can be a little
misleading when the usage diverges from the most common scheme. The
reference count of the device passed as the last parameter is always
decreased, even if the function returns no new device. So if we are
going to try alternative device IDs, we must manually increment the
device reference count before each retry. If we don't, we end up
decreasing the reference count, and after a few modprobe/rmmod cycles
the PCI devices will vanish.

In other words and as Alan put it: without this fix the EDAC code
corrupts the PCI device list.

This fixes kernel bug #50491:
https://bugzilla.kernel.org/show_bug.cgi?id=50491

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140224093927.7659dd9d@endymion.delvare
Reviewed-by: Alan Cox <alan@linux.intel.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d370afc
Lan Tianyu ACPI / processor: Rework processor throttling with work_on_cpu()
commit f3ca416 upstream.

acpi_processor_set_throttling() uses set_cpus_allowed_ptr() to make
sure that the (struct acpi_processor)->acpi_processor_set_throttling()
callback will run on the right CPU.  However, the function may be
called from a worker thread already bound to a different CPU in which
case that won't work.

Make acpi_processor_set_throttling() use work_on_cpu() as appropriate
instead of abusing set_cpus_allowed_ptr().

Reported-and-tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3d1fe6d
@ffainelli ffainelli usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
commit 2d1f7af upstream.

Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet")
changed the ENETDMA[CS] macros such that they are no longer macros, but
actual register offset definitions. The bcm63xx_udc driver was not
updated, and as a result, causes the following build error to pop up:

 CC      drivers/usb/gadget/u_ether.o
drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write':
drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not
a function
drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel':
drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not
a function
drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not
a function

Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to
take an extra channel argument, and use the channel width
(ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence
doing again what the macro implicitely did for us.

Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
67cf899
@aleksander0m aleksander0m USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8
commit 12df84d upstream.

This interface is to be handled by the qmi_wwan driver.

CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
CC: Christian Schmiedl <christian.schmiedl@gemalto.com>
CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com>
CC: David McCullough <david.mccullough@accelecon.com>
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a9a7909
Chao Bi mei: set client's read_cb to NULL when flow control fails
commit accb884 upstream.

In mei_cl_read_start(), if it fails to send flow control request, it
will release "cl->read_cb" but forget to set pointer to NULL, leaving
"cl->read_cb" still pointing to random memory, next time this client is
operated like mei_release(), it has chance to refer to this wrong pointer.

Fixes:  PANIC at kfree in mei_release()

[228781.826904] Call Trace:
[228781.829737]  [<c16249b8>] ? mei_cl_unlink+0x48/0xa0
[228781.835283]  [<c1624487>] mei_io_cb_free+0x17/0x30
[228781.840733]  [<c16265d8>] mei_release+0xa8/0x180
[228781.845989]  [<c135c610>] ? __fsnotify_parent+0xa0/0xf0
[228781.851925]  [<c1325a69>] __fput+0xd9/0x200
[228781.856696]  [<c1325b9d>] ____fput+0xd/0x10
[228781.861467]  [<c125cae1>] task_work_run+0x81/0xb0
[228781.866821]  [<c1242e53>] do_exit+0x283/0xa00
[228781.871786]  [<c1a82b36>] ? kprobe_flush_task+0x66/0xc0
[228781.877722]  [<c124eeb8>] ? __dequeue_signal+0x18/0x1a0
[228781.883657]  [<c124f072>] ? dequeue_signal+0x32/0x190
[228781.889397]  [<c1243744>] do_group_exit+0x34/0xa0
[228781.894750]  [<c12517b6>] get_signal_to_deliver+0x206/0x610
[228781.901075]  [<c12018d8>] do_signal+0x38/0x100
[228781.906136]  [<c1626d1c>] ? mei_read+0x42c/0x4e0
[228781.911393]  [<c12600a0>] ? wake_up_bit+0x30/0x30
[228781.916745]  [<c16268f0>] ? mei_poll+0x120/0x120
[228781.922001]  [<c1324be9>] ? vfs_read+0x89/0x160
[228781.927158]  [<c16268f0>] ? mei_poll+0x120/0x120
[228781.932414]  [<c133ca34>] ? fget_light+0x44/0xe0
[228781.937670]  [<c1324e58>] ? SyS_read+0x68/0x80
[228781.942730]  [<c12019f5>] do_notify_resume+0x55/0x70
[228781.948376]  [<c1a7de5d>] work_notifysig+0x29/0x30
[228781.953827]  [<c1a70000>] ? bad_area+0x5/0x3e

Signed-off-by: Chao Bi <chao.bi@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cda6b48
Alan Stern USB: EHCI: add delay during suspend to prevent erroneous wakeups
commit 3e8d6d8 upstream.

High-speed USB connections revert back to full-speed signalling when
the device goes into suspend.  This takes several milliseconds, and
during that time it's not possible to tell reliably whether the device
has been disconnected.

On some platforms, the Wake-On-Disconnect circuitry gets confused
during this intermediate state.  It generates a false wakeup signal,
which can prevent the controller from going to sleep.

To avoid this problem, this patch adds a 5-ms delay to the
ehci_bus_suspend() routine if any ports have to switch over to
full-speed signalling.  (Actually, the delay was already present for
devices using a particular kind of PHY power management; the patch
merely causes the delay to be used more widely.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Peter Chen <Peter.Chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aa0346d
@sgruszka sgruszka usb: ehci: fix deadlock when threadirqs option is used
commit a1227f3 upstream.

ehci_irq() and ehci_hrtimer_func() can deadlock on ehci->lock when
threadirqs option is used. To prevent the deadlock use
spin_lock_irqsave() in ehci_irq().

This change can be reverted when hrtimer callbacks become threaded.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9995c90
Matthieu CASTET usb: chipidea: need to mask when writting endptflush and endptprime
commit 5bf5dbe upstream.

ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
0455545
@dorchain dorchain USB: ftdi_sio: add Cressi Leonardo PID
commit 6dbd46c upstream.

Hello,

the following patch adds an entry for the PID of a Cressi Leonardo
diving computer interface to kernel 3.13.0.
It is detected as FT232RL.
Works with subsurface.

Signed-off-by: Joerg Dorchain <joerg@dorchain.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d0fd713
Steve Twiss regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
commit ebf6dad upstream.

Bug fix to allow the setting of maximum voltage for certain LDOs.

What the bug is:

There is a problem caused by an invalid calculation of n_voltages
in the driver. This n_voltages value has the potential to be
different for each regulator.

The value for linear_min_sel is set as DA9063_V##regl_name#
which can be different depending upon the regulator. This is
chosen according to the following definitions in the DA9063
registers.h file:

DA9063_VLDO1_BIAS	0
DA9063_VLDO2_BIAS	0
DA9063_VLDO3_BIAS	0
DA9063_VLDO4_BIAS	0
DA9063_VLDO5_BIAS	2
DA9063_VLDO6_BIAS	2
DA9063_VLDO7_BIAS	2
DA9063_VLDO8_BIAS	2
DA9063_VLDO9_BIAS	3
DA9063_VLDO10_BIAS	2
DA9063_VLDO11_BIAS	2

The calculation for n_voltages is valid for LDOs whose BIAS value
is zero but this is not correct for those LDOs which have a
non-zero value.

What the fix is:

In order to take into account the non-zero linear_min_sel value which
is set for the regulators LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 and
LDO11, the calculation for n_voltages should take into account the
missing term defined by DA9063_V##regl_name#.

This will in turn allow the core constraints calculation to set the
maximum voltage limits correctly and therefore allow users to apply
the maximum expected voltage to all of the LDOs.

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a905f20
@groeck groeck hwmon: (max1668) Fix writing the minimum temperature
commit 500a915 upstream.

When trying to set the minimum temperature, the driver was erroneously
writing the maximum temperature into the chip.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
00b29b3
@laijs laijs workqueue: ensure @task is valid across kthread_stop()
commit 5bdfff9 upstream.

When a kworker should die, the kworkre is notified through WORKER_DIE
flag instead of kthread_should_stop().  This, IIRC, is primarily to
keep the test synchronized inside worker_pool lock.  WORKER_DIE is
first set while holding pool->lock, the lock is dropped and
kthread_stop() is called.

Unfortunately, this means that there's a slight chance that the target
kworker may see WORKER_DIE before kthread_stop() finishes and exits
and frees the target task before or during kthread_stop().

Fix it by pinning the target task before setting WORKER_DIE and
putting it after kthread_stop() is done.

tj: Improved patch description and comment.  Moved pinning above
    WORKER_DIE for better signify what it's protecting.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
42e2d5f
@pekongupta pekongupta mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver
commit eae39cb upstream.

Fixes: commit a919e51
       mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe

Fixes ecclayout mismatch introduced in above commit for following ecc-schemes:
 - OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
 - OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 However, this patch also touches other ecc-schemes as the fix required
 refactoring common code, into ecc-scheme specific code.

This patch aligns ecc-layout for below ecc-schemes as per reference [1],[2],[3]

 +---+------------+-------------++-------------+-------------+
 |OOB|BCH8_CODE_HW|BCH8_CODE_HW_||HAM1_CODE_HW |HAM1_CODE_HW |
 |pos|            | DETECTION_SW||(x8 device)  |(x16 device) |
 +---+------------+-------------++-------------+-------------+
 | 0 |BADBLK_MARK | BADBLK_MARK || BADBLK_MARK | BADBLK_MARK |
 | 1 |BADBLK_MARK | BADBLK_MARK || eccpos[0]   | BADBLK_MARK |
 | 2 | eccpos[0]  | eccpos[0]   || eccpos[1]   | eccpos[0]   |
 | 3 | eccpos[1]  | eccpos[1]   || eccpos[2]   | eccpos[1]   |
 | 4 | eccpos[2]  | eccpos[2]   || eccpos[3]   | eccpos[2]   |
 | 5 | eccpos[3]  | eccpos[3]   || eccpos[4]   | eccpos[3]   |
 | 6 | eccpos[4]  | eccpos[4]   || eccpos[5]   | eccpos[4]   |
 | 7 | eccpos[5]  | eccpos[5]   || eccpos[6]   | eccpos[5]   |
 | 8 | eccpos[6]  | eccpos[6]   || eccpos[7]   | eccpos[6]   |
 | 9 | eccpos[7]  | eccpos[7]   || eccpos[8]   | eccpos[7]   |
 |10 | eccpos[8]  | eccpos[8]   || eccpos[9]   | eccpos[8]   |
 |11 | eccpos[9]  | eccpos[9]   || eccpos[10]  | eccpos[9]   |
 |12 | eccpos[10] | eccpos[10]  || eccpos[11]  | eccpos[10]  |
 |13 | eccpos[11] | eccpos[11]  || oobfree[0]  | eccpos[11]  |
 |14 | eccpos[12] | eccpos[12]  || oobfree[1]  | oobfree[0]  |
 |15 | eccpos[13] | <reserved>  || oobfree[2]  | oobfree[1]  |
 +---+------------+-------------++-------------+-------------+
 |16 | eccpos[14] | eccpos[13]  || oobfree[3]  | oobfree[2]  |
 |...| [...]      | [...]       || [...]       | [...]       |
 |56 | eccpos[54] | eccpos[51]  || oobfree[43] | oobfree[42] |
 |57 | eccpos[55] | <reserved>  || oobfree[44] | oobfree[43] |
 +===+============+=============+==============+=============+
 |58 | oobfree[0] | oobfree[0]  || oobfree[45] | oobfree[44] |
 |59 | oobfree[1] | oobfree[1]  || oobfree[46] | oobfree[45] |
 |60 | oobfree[2] | oobfree[2]  || oobfree[47] | oobfree[46] |
 |61 | oobfree[3] | oobfree[3]  || oobfree[48] | oobfree[47] |
 |62 | oobfree[4] | oobfree[4]  || oobfree[49] | oobfree[48] |
 |63 | oobfree[5] | oobfree[5]  || oobfree[50] | oobfree[49] |
 +---+------------+-------------+--------------+-------------+

[1] ecc-layout expected by ROM code, as specified in SoC TRM under:
      Chapter="Initialization"
        Section="Device Initialization by ROM code"
            Sub-Section="Memory Booting"
                Heading="NAND"
                Figure="ECC Locations in NAND Spare Areas"

[2] ecc-layout updates in u-boot
    http://lists.denx.de/pipermail/u-boot/2013-November/167551.html

[3] u-boot configurations to match above ecc-layout are documented at
    https://processors.wiki.ti.com/index.php/Linux_Core_NAND_User%27s_Guide

Reported-by: Enric Balletbo Serra <eballetbo@iseebcn.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aae6284
@pekongupta pekongupta mtd: nand: omap: fix ecclayout->oobfree->offset
commit aa6092f upstream.

1) In current implementation, ecclayout->oobfree->offset is calculated with
 respect to ecclayout->eccpos[0] which is incorrect because ECC bytes may not
 be stored contiguously in OOB.
 So, this patch calculates ecclayout->oobfree->offset with respect to last
 ECC byte-position 'eccpos[ecclayout->eccbytes-1]'.

2) ECC layout of some ecc-schemes expects reserved-markers at specific eccpos[]
 which should not be over-written by any file-system metadata.
 So this patch aligns oobfree->offset taking into account of such markers.

Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d98b585
@pekongupta pekongupta mtd: nand: omap: fix ecclayout->oobfree->length
commit bb38eef upstream.

This patch excludes reserved-marker byte-position from oobfree->length
calculation. Thus all bytes from oobfree->offset till end of OOB are free.

Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5f648ea
Arve Hjønnevåg staging: binder: Fix death notifications
commit e194fd8 upstream.

The change (008fa74) that moved the
node release code to a separate function broke death notifications in
some cases. When it encountered a reference without a death
notification request, it would skip looking at the remaining
references, and therefore fail to send death notifications for them.

Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
b6e55e9
Yifan Zhang iommu/arm-smmu: fix pud/pmd entry fill sequence
commit 97a6442 upstream.

The ARM SMMU driver's population of puds and pmds is broken, since we
iterate over the next level of table repeatedly setting the current
level descriptor to point at the pmd being initialised. This is clearly
wrong when dealing with multiple pmds/puds.

This patch fixes the problem by moving the pud/pmd population out of the
loop and instead performing it when we allocate the next level (like we
correctly do for ptes already). The starting address for the next level
is then calculated prior to entering the loop.

Signed-off-by: Yifan Zhang <zhangyf@marvell.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8c8c2d7
@wildea01 wildea01 iommu/arm-smmu: really fix page table locking
commit c9d09e2 upstream.

Commit a44a979 ("iommu/arm-smmu: use mutex instead of spinlock for
locking page tables") replaced the page table spinlock with a mutex, to
allow blocking allocations to satisfy lazy mapping requests.

Unfortunately, it turns out that IOMMU mappings are created from atomic
context (e.g. spinlock held during a dma_map), so this change doesn't
really help us in practice.

This patch is a partial revert of the offending commit, bringing back
the original spinlock but replacing our page table allocations for any
levels below the pgd (which is allocated during domain init) with
GFP_ATOMIC instead of GFP_KERNEL.

Reported-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d38c6fe
@wildea01 wildea01 iommu/arm-smmu: fix table flushing during initial allocations
commit 6dd35f4 upstream.

Now that we populate page tables as we traverse them ("iommu/arm-smmu:
fix pud/pmd entry fill sequence"), we need to ensure that we flush out
our zeroed tables after initial allocation, to prevent speculative TLB
fills using bogus data.

This patch adds additional calls to arm_smmu_flush_pgtable during
initial table allocation, and moves the dsb required by coherent table
walkers into the helper.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bf6d042
@wildea01 wildea01 iommu/arm-smmu: set CBARn.BPSHCFG to NSH for s1-s2-bypass contexts
commit 57ca90f upstream.

Whilst trying to bring-up an SMMUv2 implementation with the table
walker plumbed into a coherent interconnect, I noticed that the memory
transactions targetting the CPU caches from the SMMU were marked as
outer-shareable instead of inner-shareable.

After a bunch of digging, it seems that we actually need to program
CBARn.BPSHCFG for s1-s2-bypass contexts to act as non-shareable in order
for the shareability configured in the corresponding TTBCR not to be
overridden with an outer-shareable attribute.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
af56f13
@denisciocca denisciocca iio:gyro: bug on L3GD20H gyroscope support
commit a065771 upstream.

The driver was not able to manage the sensor: during probe function
and wai check, the driver stops and writes: "device name and WhoAmI mismatch."
The correct value of L3GD20H wai is 0xd7 instead of 0xd4.
Dropped support for the sensor.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e5a5153
@manugupt1 manugupt1 staging: r8188eu: Add new device ID
commit 260ea9c upstream.

The D-Link DWA-123 REV D1 with USB ID 2001:3310 uses this driver.

Signed-off-by: Manu Gupta <manugupt1@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
721486f
Juergen Beisert staging:iio:adc:MXS:LRADC: fix touchscreen statemachine
commit 760dbe1 upstream.

Releasing the touchscreen lets the internal statemachine left in a wrong state.
Due to this the release coordinate will be reported again by accident when the next
touchscreen event happens. This change sets up the correct state when waiting
for the next touchscreen event.

This has led to reported issues with calibrating the touchscreen.
Bug was introduced somewhere in the series that began with
18da755
Staging/iio/adc/touchscreen/MXS: add proper clock handling
in which the way this driver worked was substantially changed
to be interrupt driven rather than relying on a busy loop.
This was a regression in the 3.13 kernel.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ea6de21
@shesselba shesselba irqchip: orion: clear bridge cause register on init
commit 7b119fd upstream.

It is good practice to mask and clear pending irqs on init. We already
mask all irqs, so also clear the bridge irq cause register.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
31b6112
@shesselba shesselba irqchip: orion: use handle_edge_irq on bridge irqs
commit 5f40067 upstream.

Bridge irqs are edge-triggered, i.e. they get asserted on low-to-high
transitions and not on the level of the downstream interrupt line.
This replaces handle_level_irq by the more appropriate handle_edge_irq.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
c703ce7
@shesselba shesselba irqchip: orion: clear stale interrupts in irq_startup
commit e0318ec upstream.

Bridge IRQ_CAUSE bits are asserted regardless of the corresponding bit in
IRQ_MASK register. To avoid interrupt events on stale irqs, we have to clear
them before unmask. This installs an .irq_startup callback to ensure stale
irqs are cleared before initial unmask.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cfc9142
Ben Hutchings perf trace: Add fallback definition of EFD_SEMAPHORE
commit 79d26a6 upstream.

glibc 2.17 is missing this on sparc, despite the fact that it's not
architecture-specific.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 49af9e9 ('perf trace: Beautify eventfd2 'flags' arg')
Cc: <stable@vger.kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1391648435.3003.100.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
af20781
@lunn lunn irqchip: orion: Fix getting generic chip pointer.
commit d86e9af upstream.

Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt
handler. The bridge interrupt is implemented using a single generic
chip. Thus the parameter passed to irq_get_domain_generic_chip()
should always be zero.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Fixes: 9dbd90f ("irqchip: Add support for Marvell Orion SoCs")
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
777bf82
Peter Zijlstra perf: Fix hotplug splat
commit e3703f8 upstream.

Drew Richardson reported that he could make the kernel go *boom* when hotplugging
while having perf events active.

It turned out that when you have a group event, the code in
__perf_event_exit_context() fails to remove the group siblings from
the context.

We then proceed with destroying and freeing the event, and when you
re-plug the CPU and try and add another event to that CPU, things go
*boom* because you've still got dead entries there.

Reported-by: Drew Richardson <drew.richardson@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/n/tip-k6v5wundvusvcseqj1si0oz0@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7cc910f
@tiwai tiwai ALSA: hda - Add a fixup for HP Folio 13 mute LED
commit 37c367e upstream.

HP Folio 13 may have a broken BIOS that doesn't set up the mute LED
GPIO properly, and the driver guesses it wrongly, too.  Add a new
fixup entry for setting the GPIO pin statically for this laptop.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70991
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
84d6269
@jcmvbkbc jcmvbkbc xtensa: save current register frame in fast_syscall_spill_registers_f…
…ixup

commit 3251f1e upstream.

We need it saved because it contains a3 where we track which register
windows we still need to spill, and fixup handler may call C exception
handlers. Also fix comments.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
b87babb
@jcmvbkbc jcmvbkbc xtensa: introduce spill_registers_kernel macro
commit e2fd137 upstream.

Most in-kernel users want registers spilled on the kernel stack and
don't require PS.EXCM to be set. That means that they don't need fixup
routine and could reuse regular window overflow mechanism for that,
which makes spill routine very simple.

Suggested-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ee9d6de
Charles Keepax Input - arizona-haptics: Fix double lock of dapm_mutex
commit c420496 upstream.

snd_soc_dapm_sync takes the dapm_mutex internally, but we currently take
it externally as well. This patch fixes this.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e2fa980
@djbw djbw ioat: fix tasklet tear down
commit da87ca4 upstream.

Since commit 7787380 "net_dma: mark broken" we no longer pin dma
engines active for the network-receive-offload use case.  As a result
the ->free_chan_resources() that occurs after the driver self test no
longer has a NET_DMA induced ->alloc_chan_resources() to back it up.  A
late firing irq can lead to ksoftirqd spinning indefinitely due to the
tasklet_disable() performed by ->free_chan_resources().  Only
->alloc_chan_resources() can clear this condition in affected kernels.

This problem has been present since commit 3e03745 "I/OAT: Add
support for MSI and MSI-X" in 2.6.24, but is now exposed. Given the
NET_DMA use case is deprecated we can revisit moving the driver to use
threaded irqs.  For now, just tear down the irq and tasklet properly by:

1/ Disable the irq from triggering the tasklet

2/ Disable the irq from re-arming

3/ Flush inflight interrupts

4/ Flush the timer

5/ Flush inflight tasklets

References:
https://lkml.org/lkml/2014/1/27/282
https://lkml.org/lkml/2014/2/19/672

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Mike Galbraith <bitbucket@online.de>
Reported-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Tested-by: Mike Galbraith <bitbucket@online.de>
Tested-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
098ae37
@eparis eparis SELinux: bigendian problems with filename trans rules
commit 9085a64 upstream.

When writing policy via /sys/fs/selinux/policy I wrote the type and class
of filename trans rules in CPU endian instead of little endian.  On
x86_64 this works just fine, but it means that on big endian arch's like
ppc64 and s390 userspace reads the policy and converts it from
le32_to_cpu.  So the values are all screwed up.  Write the values in le
format like it should have been to start.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
37ab756
@jankara jankara quota: Fix race between dqput() and dquot_scan_active()
commit 1362f4e upstream.

Currently last dqput() can race with dquot_scan_active() causing it to
call callback for an already deactivated dquot. The race is as follows:

CPU1					CPU2
  dqput()
    spin_lock(&dq_list_lock);
    if (atomic_read(&dquot->dq_count) > 1) {
     - not taken
    if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
      spin_unlock(&dq_list_lock);
      ->release_dquot(dquot);
        if (atomic_read(&dquot->dq_count) > 1)
         - not taken
					  dquot_scan_active()
					    spin_lock(&dq_list_lock);
					    if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
					     - not taken
					    atomic_inc(&dquot->dq_count);
					    spin_unlock(&dq_list_lock);
        - proceeds to release dquot
					    ret = fn(dquot, priv);
					     - called for inactive dquot

Fix the problem by making sure possible ->release_dquot() is finished by
the time we call the callback and new calls to it will notice reference
dquot_scan_active() has taken and bail out.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3dda6e5
Davidlohr Bueso ipc,mqueue: remove limits for the amount of system-wide queues
commit f3713fd upstream.

Commit 93e6f11 ("ipc/mqueue: cleanup definition names and
locations") added global hardcoded limits to the amount of message
queues that can be created.  While these limits are per-namespace,
reality is that it ends up breaking userspace applications.
Historically users have, at least in theory, been able to create up to
INT_MAX queues, and limiting it to just 1024 is way too low and dramatic
for some workloads and use cases.  For instance, Madars reports:

 "This update imposes bad limits on our multi-process application.  As
  our app uses approaches that each process opens its own set of queues
  (usually something about 3-5 queues per process).  In some scenarios
  we might run up to 3000 processes or more (which of-course for linux
  is not a problem).  Thus we might need up to 9000 queues or more.  All
  processes run under one user."

Other affected users can be found in launchpad bug #1155695:
  https://bugs.launchpad.net/ubuntu/+source/manpages/+bug/1155695

Instead of increasing this limit, revert it entirely and fallback to the
original way of dealing queue limits -- where once a user's resource
limit is reached, and all memory is used, new queues cannot be created.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reported-by: Madars Vitolins <m@silodev.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10daa7c
@linusw linusw dma: ste_dma40: don't dereference free:d descriptor
commit e9baa9d upstream.

It appears that in the DMA40 driver the DMA tasklet will very
often dereference memory for a descriptor just free:d from the
DMA40 slab. Nothing happens because no other part of the driver
has yet had a chance to claim this memory, but it's really
nasty to dereference free:d memory, so let's check the flag
before the descriptor is free and store it in a bool variable.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aa9d533
@olofj olofj ARM64: unwind: Fix PC calculation
commit e306dfd upstream.

The frame PC value in the unwind code used to just take the saved LR
value and use that.  That's incorrect as a stack trace, since it shows
the return path stack, not the call path stack.

In particular, it shows faulty information in case the bl is done as
the very last instruction of one label, since the return point will be
in the next label. That can easily be seen with tail calls to panic(),
which is marked __noreturn and thus doesn't have anything useful after it.

Easiest here is to just correct the unwind code and do a -4, to get the
actual call site for the backtrace instead of the return site.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
0648c3a
Sebastian Capella PM / hibernate: Fix restore hang in freeze_processes()
commit f8d5b9e upstream.

During restore, pm_notifier chain are called with
PM_RESTORE_PREPARE.  The firmware_class driver handler
fw_pm_notify does not have a handler for this.  As a result,
it keeps a reader on the kmod.c umhelper_sem.  During
freeze_processes, the call to __usermodehelper_disable tries to
take a write lock on this semaphore and hangs waiting.

Signed-off-by: Sebastian Capella <sebastian.capella@linaro.org>
Acked-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
e5b0fd6
Dr. Greg Wettstein qla2xxx: Fix kernel panic on selective retransmission request
commit 6f58c78 upstream.

A selective retransmission request (SRR) is a fibre-channel
protocol control request which provides support for requesting
retransmission of a data sequence in response to an issue such as
frame loss or corruption.  These events are experienced
infrequently in fibre-channel based networks which makes
it difficult to test and assess codepaths which handle these
events.

We were fortunate enough, for some definition of fortunate, to
have a metro-area single-mode SAN link which, at 10 GBPS
sustained load levels, would consistently generate SRR's in
a SCST based target implementation using our SCST/in-kernel
Qlogic target interface driver.  In response to an SRR the
in-kernel Qlogic target driver immediately panics resulting
in a catastrophic storage failure for serviced initiators.

The culprit was a debug statement in the qla_target.c file which
does not verify that a pointer to the SCSI CDB is not null.
The unchecked pointer dereference results in the kernel panic
and resultant system failure.

The other two references to the SCSI CDB by the SRR handling code
use a ternary operator to verify a non-null pointer is being
acted on.  This patch simply adds a similar test to the implicated
debug statement.

This patch is a candidate for any stable kernel being maintained
since it addresses a potentially catastrophic event with
minimal downside.

Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
b7dd2bb
@jdelvare jdelvare i7300_edac: Fix device reference count
commit 75135da upstream.

pci_get_device() decrements the reference count of "from" (last
argument) so when we break off the loop successfully we have only one
device reference - and we don't know which device we have. If we want
a reference to each device, we must take them explicitly and let
the pci_get_device() walk complete to avoid duplicate references.

This is serious, as over-putting device references will cause
the device to eventually disappear. Without this fix, the kernel
crashes after a few insmod/rmmod cycles.

Tested on an Intel S7000FC4UR system with a 7300 chipset.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140224111656.09bbb7ed@endymion.delvare
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d8c2a97
Kirill A. Shutemov mm, thp: fix infinite loop on memcg OOM
commit 9845cbb upstream.

Masayoshi Mizuma reported a bug with the hang of an application under
the memcg limit.  It happens on write-protection fault to huge zero page

If we successfully allocate a huge page to replace zero page but hit the
memcg limit we need to split the zero page with split_huge_page_pmd()
and fallback to small pages.

The other part of the problem is that VM_FAULT_OOM has special meaning
in do_huge_pmd_wp_page() context.  __handle_mm_fault() expects the page
to be split if it sees VM_FAULT_OOM and it will will retry page fault
handling.  This causes an infinite loop if the page was not split.

do_huge_pmd_wp_zero_page_fallback() can return VM_FAULT_OOM if it failed
to allocate one small page, so fallback to small pages will not help.

The solution for this part is to replace VM_FAULT_OOM with
VM_FAULT_FALLBACK is fallback required.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
c1cb0a7
@jahogan jahogan irq-metag*: stop set_affinity vectoring to offline cpus
commit f229006 upstream.

Fix irq_set_affinity callbacks in the Meta IRQ chip drivers to AND
cpu_online_mask into the cpumask when picking a CPU to vector the
interrupt to.

As Thomas pointed out, the /proc/irq/$N/smp_affinity interface doesn't
filter out offline CPUs, so without this patch if you offline CPU0 and
set an IRQ affinity to 0x3 it vectors the interrupt onto CPU0 even
though it is offline.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4588b17
@snitm snitm dm cache: move hook_info into common portion of per_bio_data structure
commit c6eda5e upstream.

Commit c9d28d5 ("dm cache: promotion optimisation for writes")
incorrectly placed the 'hook_info' member in the writethrough-only
portion of the per_bio_data structure.

Given that the overwrite optimization may be used for writeback the
'hook_info' member must be placed above the 'cache' member of the
per_bio_data structure.  Any members above 'cache' are available from
both writeback and writethrough modes' per_bio_data structure.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f755b3d
@snitm snitm dm thin: avoid metadata commit if a pool's thin devices haven't changed
commit 4d1662a upstream.

Commit 905e51b ("dm thin: commit outstanding data every second")
introduced a periodic commit.  This commit occurs regardless of whether
any thin devices have made changes.

Fix the periodic commit to check if any of a pool's thin devices have
changed using dm_pool_changed_this_transaction().

Reported-by: Alexander Larsson <alexl@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5a6ffcb
Alex Deucher drm/radeon: fix audio disable on dce6+
commit d7eb0a0 upstream.

Properly clear the enable bit when audio disable is requested.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1e0a28f
@snitm snitm dm thin: fix the error path for the thin device constructor
commit 1acacc0 upstream.

dm_pool_close_thin_device() must be called if dm_set_target_max_io_len()
fails in thin_ctr().  Otherwise __pool_destroy() will fail because the
pool will still have an open thin device:

 device-mapper: thin metadata: attempt to close pmd when 1 device(s) are still open
 device-mapper: thin: __pool_destroy: dm_pool_metadata_close() failed.

Also, must establish error code if failing thin_ctr() because the pool
is in fail_io mode.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
da723a7
Alex Deucher drm/radeon: print the supported atpx function mask
commit 9f050c7 upstream.

Print the supported functions mask in addition to
the version.  This is useful in debugging PX
problems since we can see what functions are available.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4e9d520
Christian König drm/radeon: fix missing bo reservation
commit 5e386b5 upstream.

Otherwise we might get a crash here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5cac678
@hreinecke hreinecke dm mpath: fix stalls when handling invalid ioctls
commit a1989b3 upstream.

An invalid ioctl will never be valid, irrespective of whether multipath
has active paths or not.  So for invalid ioctls we do not have to wait
for multipath to activate any paths, but can rather return an error
code immediately.  This fix resolves numerous instances of:

 udevd[]: worker [] unexpectedly returned with status 0x0100

that have been seen during testing.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
40e93d9
@jnikula jnikula drm/i915/dp: increase native aux defer retry timeout
commit 04eada2 upstream.

Give more slack to sink devices before retrying on native aux
defer. AFAICT the 100 us timeout was not based on the DP spec.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org (on Jani's request)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
af42ee9
@jnikula jnikula drm/i915/dp: add native aux defer retry limit
commit f51a44b upstream.

Retrying indefinitely places too much trust on the aux implementation of
the sink devices.

Reported-by: Daniel Martin <consume.noise@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71267
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Sree Harsha Totakura <freedesktop@h.totakura.in>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
87c3c22
Alex Deucher drm/radeon: disable pll sharing for DP on DCE4.1
commit 9ef4e1d upstream.

Causes display problems.  We had already disabled
sharing for non-DP displays.

Based on a patch from:
Niels Ole Salscheider <niels_ole@salscheider-online.de>

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=58121

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
65236ea
Jerome Glisse drm/radeon: free uvd ring on unload
commit d965441 upstream.

Need to free the uvd ring. Also reshuffle gart tear down to
happen after uvd tear down.

Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
75b2711
@gregkh gregkh Linux 3.13.6
404df65
Tomasz Figa clk: max77686: Correct callback used for checking clock status
Changing status of clock gates in max77686 requires i2c transfers, which
can sleep, so this is done in prepare and unprepare callbacks. Due to
this, checking whether whether the clock is ungated must be done
in is_prepared() callback as well, for consistency.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
ea25586
Tomasz Figa clk: max77686: Provide .recalc_rate() operation
It is usually nice to know frequency of a clock, so this patch adds a
.recalc_rate() callback returning rates of provided clocks.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
063dd34
Tomasz Figa clk: max77686: Refactor successful exit of probe function
The function can simply return 0, without jumping to a separate label,
which does exactly the same. This patch does not introduce any
functional change, just a clean-up.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
132f3c8
Tomasz Figa clk: max77686: Make max77686_clk_register() return struct clk *
As a preparation for further patches, this patch modifies the clock
registration helper function to return a pointer to the newly registered
clock. No functional change is done to the driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
490dd2f
Tomasz Figa clk: max77686: Fix clean-up in error and remove paths
This patch fixes invalid kfree() and adds missing call to clk_unregister()
in error and remove paths in max77686_clk_probe(). While at it, error
handling is also cleaned up.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
548b527
Tomasz Figa clk: max77686: Refactor driver data handling
As a prerequisite for further patch adding OF clock provider support to
the driver, this patch changes the driver to store an array of struct
clk * as driver data.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
0adf92e
Tomasz Figa clk: max77686: Register OF clock provider
If max77686 chip is instantiated from device tree, it is desirable to
have an OF clock provider to allow device tree based look-up of clocks.
This patch adds OF clock provider registration to the clk-max77686
driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
4fece53
Tomasz Figa ARM: dts: Add clock provider specific properties to max77686 node
This patch adds a label and #clock-cells property to device node of
max77686 PMIC to allow using it as a clock provider.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
c2ec368
Bartlomiej Zolnierkiewicz ARM: EXYNOS: cpuidle: fix AFTR mode check
The EXYNOS cpuidle driver code assumes that cpuidle core will handle
dev->state_count smaller than drv->state_count but currently this is
untrue (dev->state_count is used only for handling cpuidle state sysfs
entries and drv->state_count is used for all other cases) and will not
be fixed in the future as dev->state_count is planned to be removed.

Fix the issue by checking for the max supported idle state in AFTR
state's ->enter handler (exynos4_enter_lowpower()) and entering AFTR
mode only when cores other than CPU0 are offline.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
9fa577d
@vpalatin vpalatin i2c: s3c2410: do not put a default class for the adapter
Avoid adding I2C_CLASS_HWMON and I2C_CLASS_SPD class flags to all
Samsung I2C adapters when the I2C mappings are defined in a device tree.
So the drivers doing an auto-detection by probing busses won't mess-up
sensitive I2C devices or trigger long timeouts on non-functional busses.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
e77e13a
Simon Glass i2c-s3c2410: Leave the bus disabled unless it is in use
There is a rather odd feature of the exynos i2c controller that if it
is left enabled, it can lock itself up with the clk line held low.
This makes the bus unusable.

Unfortunately, the s3c24xx_i2c_set_master() function does not notice
this, and reports a timeout. From then on the bus cannot be used until
the AP is rebooted.

The problem happens when any sort of interrupt occurs (e.g. due to a
bus transition) when we are not in the middle of a transaction. We
have seen many instances of this when U-Boot leaves the bus apparently
happy, but Linux cannot access it.

The current code is therefore pretty fragile.

This fixes things by leaving the bus disabled unless we are actually
in a transaction. We enable the bus at the start of the transaction and
disable it at the end. That way we won't get interrupts and will not
lock up the bus.

It might be possible to clear pending interrupts on start-up, but this
seems to be a more robust solution. We can't service interrupts when
we are not in a transaction, and anyway would rather not lock up the
bus while we try.

Signed-off-by: Simon Glass <sjg@chromium.org>
Cc: Grant Grundler <grundler@chromium.org>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
4fe2af6
Seungwon Jeon ARM: dts: add clock provider for mshc node for Exynos4412 SOC
Clock lookup information is required as driver can manipulate
clock rate properly.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
649daaf
Tomasz Figa ARM: dts: Fix definition of MSHC device tree nodes for exynos4x12
All SoCs from Exynos4x12 series contain the MSHC block, so its node can
be located in exynos4x12.dtsi. In addition, missing clock specifiers
are added, generic SoC attributes are moved from board dts files
to common dtsi file of SoC family and the node is renamed to a more
generic name to follow node naming recommendations.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
7f1ffc4
Tomasz Figa ARM: dts: Drop interrupt controller properties from MCT nodes for exy…
…nos4 SoCs

MCT is not an interrupt controller and so there is no point for device
tree nodes representing it to contain interrupt-controller
and #interrupt-cells properties.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
a1b1112
Tomasz Figa ARM: dts: Move MCT node to exynos4x12.dtsi
For MCT block compatible with "samsung,exynos4412-mct", that uses PPI
interrupts for local timers, only one local interrupt needs to be
specified, since it is a per-processor interrupt.

This allows moving MCT node of Exynos4x12 SoCs back to common
exynos4x12.dtsi, since they have the same set of interrupts to be
specified, which was the only difference.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
fea952a
Tomasz Figa ARM: dts: Simplify MCT interrupt map for exynos4 SoCs
There is no need to use two cells for interrupt specifiers inside the
MCT interrupt map, so this patch simplifies the map to use one cell.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
949bf44
Tomasz Figa ARM: dts: Fix missing spaces after labels for exynos
For consistency with other device tree nodes, this patch adds missing
spaces after node labels.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
403a9ea
@tobiasjakobi tobiasjakobi ARM: dts: Add support for exynos4412 based ODROID-X2 board
ee2a3fd
Russell King ARM: fix executability of CMA mappings
The CMA region was being marked executable:

0xdc04e000-0xdc050000           8K     RW x      MEM/CACHED/WBRA
0xdc060000-0xdc100000         640K     RW x      MEM/CACHED/WBRA
0xdc4f5000-0xdc500000          44K     RW x      MEM/CACHED/WBRA
0xdcce9000-0xe0000000       52316K     RW x      MEM/CACHED/WBRA

This is mainly due to the badly worded MT_MEMORY_DMA_READY symbol, but
there are also a few other places in dma-mapping which should be
corrected to use the right constant.  Fix all these places:

0xdc04e000-0xdc050000           8K     RW NX     MEM/CACHED/WBRA
0xdc060000-0xdc100000         640K     RW NX     MEM/CACHED/WBRA
0xdc280000-0xdc300000         512K     RW NX     MEM/CACHED/WBRA
0xdc6fc000-0xe0000000       58384K     RW NX     MEM/CACHED/WBRA

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
786dfee
@tobiasjakobi tobiasjakobi ARM: EXYNOS: Readd S3C_PA_WDT define to mach/map.h header
This compatibility define is still used in arch/arm/plat-samsung/include/plat/uncompress.h
3f8d7b1
@prahal prahal drm/exynos: g2d: add exynos4212 as a compatible device.
9fa7c2d
@tobiasjakobi tobiasjakobi ARM: EXYNOS: Add secure firmware support for l2x0 init
Based on a patch by Gu1 <gu1@aeroxteam.fr>
1e55ce8
Chanho Park ARM: dts: Add arm-pmu node for exynos4412
The Exynos4412 has 4 cpus and each has a performance counter.
Thus, we should define 4 interrupts which are combined by irq-combiner for arm
pmu.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
f441b62
Leela Krishna Amudala ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
This patch adds pmusysreg node to exynos5250 and exynos5420 dtsi files to
handle PMU register accesses in a centralized way using syscon driver

Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
9544a94
Leela Krishna Amudala watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu r…
…egister

Add device tree support for exynos5250 and 5420 SoCs and use syscon regmap interface
to configure AUTOMATIC_WDT_RESET_DISABLE and MASK_WDT_RESET_REQUEST registers of PMU
to mask/unmask enable/disable of watchdog in probe and s2r scenarios.

Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
9102bab
Leela Krishna Amudala ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420
In Exynos5 series SoCs, PMU has registers to enable/disable mask/unmask
watchdog timer which is not the case with s3c series SoCs so, there is a
need to have different compatible names for watchdog to handle these pmu
registers access.

Hence this patch removes watchdog node from Exynos5.dtsi common file and
make it separate by updating existing node in Exynos5250 and adding new node
to Exynos5420. This patch also makes the watchdog node enabled by default

Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
7d74ce7
@ohporter ohporter phy: add phy_get_bus_width()/phy_set_bus_width() calls
This adds a pair of APIs that allows the generic PHY subsystem to
provide information on the PHY bus width. The PHY provider driver may
use phy_set_bus_width() to set the bus width that the PHY supports.
The controller driver may then use phy_get_bus_width() to fetch the
PHY bus width in order to properly configure the controller.

Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
e5b2166
@jwrdegoede jwrdegoede phy-core: phy_get: Leave error logging to the caller
In various cases errors may be expected, ie probe-deferral or a call to
phy_get from a driver where the use of a phy is optional.

Rather then adding all sort of complicated checks for this, and/or adding
special functions like devm_phy_get_optional, simply don't log an error,
and let deciding if get_phy returning an error really should result in a
dev_err up to the caller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d3838a2
Kamil Debski phy: core: Add an exported of_phy_get function
Previously the of_phy_get function took a struct device * and
was declared static. It was impossible to call it from
another driver and thus it was impossible to get phy defined
for a given node. The old function was renamed to _of_phy_get
and was left for internal use. of_phy_get function was added
and it was exported. The function enables to get a phy for
a given device tree node.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
f9aaa20
@lunn lunn drivers: phy: Add support for optional phys
Add devm_phy_optional_get and phy_optional_get, which should be used
when the phy is optional. They does not return an error when the phy
does not exist, rather they returns NULL, which is considered as a valid
phy, but results in NOPs when used with the consumer API.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
c921312
Kamil Debski phy: core: Add devm_of_phy_get to phy-core
Adding devm_of_phy_get will allow to get phys by supplying a
pointer to the struct device_node instead of struct device.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
dd0fb81
Kamil Debski dts: Add usb2phy to Exynos 4
Add support to PHY of USB2 of the Exynos 4 SoC.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
5b55e25
Kamil Debski phy: Add new Exynos USB 2.0 PHY driver
Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic
PHY framework. The driver includes support for the Exynos 4x10 and 4x12
SoC families.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
40a44ed
Kamil Debski phy: Add Exynos 5250 support to the Exynos USB 2.0 PHY driver
Add support for Exynos 5250. This driver is to replace the old
USB 2.0 PHY driver.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
8cc82ae
Kamil Debski usb: ehci-exynos: Change to use phy provided by the generic phy frame…
…work

Change the phy provider used from the old one using the USB phy
framework to a new one using the Generic phy framework.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
fe04379
@tobiasjakobi tobiasjakobi ARM: dts: Enable EHCI and new USB phy nodes on ODROID-X2
ff0be8c
@tobiasjakobi tobiasjakobi ARM: dts: Adjust regular names for ODROID-X2 (remove redundant stuff)
6811301
@tobiasjakobi tobiasjakobi ARM: dts: Only HSIC0 is used on the ODROID-X2
aaebfa3
@tobiasjakobi tobiasjakobi usb3503: intn is the interrupt pin (correct error message)
108d5c8
@tobiasjakobi tobiasjakobi ARM: dts: correct GPIOs for usb3503 on ODROID-X2
366a635
@tobiasjakobi tobiasjakobi usb3503: Add 'usb3503-secondary-refclk' property to device tree
Based on HardKernel patch.
224a391
@tobiasjakobi tobiasjakobi ARM: dts: document port usage on USB3503 (ODROID-X2 board)
97a57d9
@tobiasjakobi tobiasjakobi usb3503: fix typos in devicetree binding docu
da9b9b1
@tobiasjakobi tobiasjakobi usb3503: Add 'usb3503-gpio-waittime' property to device tree
3ef3779
@tobiasjakobi tobiasjakobi ARM: dts: Use 100ms wait time for USB3503 (ODROID-X2 board)
71eaa56
@tobiasjakobi tobiasjakobi usb3503: add more register defines
3fbc087
@tobiasjakobi tobiasjakobi usb3503: write to PDS and CFG1 register instead of updating
038cb77
@tobiasjakobi tobiasjakobi usb3503: clarify what the registers really do
d3d2cf8
@tobiasjakobi tobiasjakobi usb3503: set some more bits in the CFG1 register
fb39c0b
@tobiasjakobi tobiasjakobi ARM: dts: Set i2c0 clock speed to 400 kHz (ODROID-X2 board)
c819004
@tobiasjakobi tobiasjakobi Initial import of mali r4p0 kernel driver
9d48384
@tobiasjakobi tobiasjakobi mali: some fixes
still doesn't compile, need to include more of prahal's changes
c094486
@tobiasjakobi tobiasjakobi usb: ohci-exynos: Change to use phy provided by the generic phy frame…
…work

Rebased patch by Jingoo Han <jg1.han@samsung.com>
7708680
@tobiasjakobi tobiasjakobi ARM: dts: set i2c slave addr (ODROID-X2 board)
a1ee94b
@tobiasjakobi tobiasjakobi ARM: dts: Increase other i2c busses to 400 kHz (ODROID-X2 board)
3b100d6
@tom3q tom3q mmc: sdhci-s3c: Use shifts to divide by powers of two
Current implementation of sdhci_s3c_consider_clock() is highly
inefficient due to multiple integer divisions by variable performed in a
loop. Since only divisors that are powers of two are considered, this
patch replaces them with respective shifts, removing all the integer
divisions.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
f2c46e3
@tom3q tom3q mmc: sdhci-s3c: Cache bus clock rates
To fix scheduling while atomic happening in sdhci_s3c_set_clock() caused
by calling clk_get_rate() that might sleep, this patch modifies the
driver to cache rates of all bus clocks at probe time and then only use
those cache values.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
263416a
@tom3q tom3q mmc: sdhci-s3c: Use correct condition to check for clock presence
IS_ERR() must be used to make sure that not a valid clock was returned
by clk_get() and company.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
8abea76
@tom3q tom3q mmc: sdhci-s3c: Simplify min/max clock calculation
This patch reimplements functions calculating minimum and maximum clock
rates to leverage clock rate cache introduced by previous patches.

In addition, the calculation is simplified to just comparing input
clock rates (max case) or input clock rates divided by maximum divisor
(min case), which is basically what the original code did, but with much
more unnecessary work.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
9006a12
@tom3q tom3q mmc: sdhci-s3c: Fix handling of bus clock switching
Currently the driver assumes at probe that controller is configured for
last valid enumerated bus clock. This assumption is completely wrong, as
there is no way to ensure such configuration until the hardware gets
first configured (by calling sdhci_s3c_set_clock()).

This patch modifies the driver to set current clock at probe to unknown
state (represented by negative value) and make sure that the hardware
gets actually configured to selected clock in sdhci_s3c_set_clock().

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
840f444
@tom3q tom3q mmc: sdhci-s3c: Do not allow frequencies higher than requested
This patch modifies sdhci_s3c_consider_clock() to fail if bus clock
being considered can not provide frequency lower or equal requested,
instead of returning the lowest supported.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
4278219
@tobiasjakobi tobiasjakobi ARM: dts: ODROID-X2: Disable USB host port for now
4c10762
@larsclausen larsclausen dma: pl330: Alloc dma_parms for the dma device
In order to be able to set a maximum segment size for the device we need to
allocate a dma_parameters struct for the device first.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
709ed3f
Marek Szyprowski ARM: Exynos: replace custom MFC reserved memory handling with generic…
… code

MFC driver use custom bindings for managing reserved memory. Those bindings
are not really specific to MFC device and no even well discussed. They can
be easily replaced with generic, platform independent code for handling
reserved and contiguous memory.

Two additional child devices for each memory port (AXI master) are
introduced to let one assign some properties to each of them. Later one
can also use them to assign properties related to SYSMMU controllers,
which can be used to manage the limited dma window provided by those
memory ports.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
5096306
Marek Szyprowski media: s5p-mfc: remove DT hacks and simplify initialization code
This patch removes custom initialization of reserved memory regions from
s5p-mfc driver. Memory initialization can be now handled by generic
code.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
c690f0e
@prahal prahal clk/exynos4: add mout_hdmi mux clock for hdmi
Based on work by Rahul Sharma <rahul.sharma@samsung.com>

clk/exynos5250: add mout_hdmi mux clock for hdmi

hdmi driver needs to change the parent of hdmi clock
frequently between pixel clock and hdmiphy clock. hdmiphy is
not stable after power on and for a short interval while changing
the phy configuration. For this duration pixel clock is used to
clock hdmi.

This patch is exposing the mux for changing parent.
4d0f7cd
@prahal prahal clk/exynos4: add sclk_hdmiphy in the list of special clocks
Based on work from Rahul Sharma <rahul.sharma@samsung.com>

clk/exynos5250: add sclk_hdmiphy in the list of special clocks

hdmi driver needs hdmiphy clock which is one of the parent
for hdmi mux clock. This is required while changing the parent
of mux clock.
8c312c0
Prathyush K drm/exynos: modify condition in mixer and hdmi resume
If mixer is runtime suspended (by DPMS OFF), mixer_suspend
does not call mixer_poweroff and just returns. Similarily the
mixer_resume should not resume the mixer if mixer is
runtime_suspended. It should be done through DPMS ON.

The existing check is stopping the resume. This issue is fixed
by reversing the condiftion. It also holds good for hdmi driver.

v2: updated the error messages.

Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
99ffdcd
@tobiasjakobi tobiasjakobi ARM: dts: ODROID-X2: Add hdmidcc and hdmiphy node
a8ad73d
@tobiasjakobi tobiasjakobi ARM: dts: ODROID-X2: Add hdmi node
a7bf7eb
@tobiasjakobi tobiasjakobi deleted the branch
@andy-shev andy-shev referenced this pull request from a commit in andy-shev/linux
Cristian Stoica crypto: caam - remove duplicated sg copy functions
Replace equivalent (and partially incorrect) scatter-gather functions
with ones from crypto-API.

The replacement is motivated by page-faults in sg_copy_part triggered
by successive calls to crypto_hash_update. The following fault appears
after calling crypto_ahash_update twice, first with 13 and then
with 285 bytes:

Unable to handle kernel paging request for data at address 0x00000008
Faulting instruction address: 0xf9bf9a8c
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=8 CoreNet Generic
Modules linked in: tcrypt(+) caamhash caam_jr caam tls
CPU: 6 PID: 1497 Comm: cryptomgr_test Not tainted
3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2 #75
task: e9308530 ti: e700e000 task.ti: e700e000
NIP: f9bf9a8c LR: f9bfcf28 CTR: c0019ea0
REGS: e700fb80 TRAP: 0300   Not tainted
(3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2)
MSR: 00029002 <CE,EE,ME>  CR: 44f92024  XER: 20000000
DEAR: 00000008, ESR: 00000000

GPR00: f9bfcf28 e700fc30 e9308530 e70b1e55 00000000 ffffffdd e70b1e54 0bebf888
GPR08: 902c7ef5 c0e771e2 00000002 00000888 c0019ea0 00000000 00000000 c07a4154
GPR16: c08d0000 e91a8f9c 00000001 e98fb400 00000100 e9c83028 e70b1e08 e70b1d48
GPR24: e992ce10 e70b1dc8 f9bfe4f4 e70b1e55 ffffffdd e70b1ce0 00000000 00000000
NIP [f9bf9a8c] sg_copy+0x1c/0x100 [caamhash]
LR [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash]
Call Trace:
[e700fc30] [f9bf9c50] sg_copy_part+0xe0/0x160 [caamhash] (unreliable)
[e700fc50] [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash]
[e700fcb0] [f954e19c] crypto_tls_genicv+0x13c/0x300 [tls]
[e700fd10] [f954e65c] crypto_tls_encrypt+0x5c/0x260 [tls]
[e700fd40] [c02250ec] __test_aead.constprop.9+0x2bc/0xb70
[e700fe40] [c02259f0] alg_test_aead+0x50/0xc0
[e700fe60] [c02241e4] alg_test+0x114/0x2e0
[e700fee0] [c022276c] cryptomgr_test+0x4c/0x60
[e700fef0] [c004f658] kthread+0x98/0xa0
[e700ff40] [c000fd04] ret_from_kernel_thread+0x5c/0x64

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
307fd54
@koct9i koct9i referenced this pull request from a commit
Commit has since been removed from the repository and is no longer available.
@aryabinin aryabinin referenced this pull request from a commit in aryabinin/linux
mmotm auto import