Skip to content

CounterApplet

Travis Goodspeed edited this page Jul 31, 2018 · 1 revision

The Frequency Counter applet is a handy little tool for finding the frequency of a UHF transmitter. Additionally, it will also show the incoming signal strength, so you can verify that the correct frequency has been found.

Enter the Counter by choosing it in the SubmenuApplet, then press 0 for a fresh sweep or 1 to perform a new sweep while retaining knowledge of the old maximum. The watch will quickly scan through the supported frequencies, then display the maximum while waiting for further instructions. The periods at the bottom of the screen will indicate the signal strength at that frequency, and you can copy that frequency into the VFO by pressing the = key.