Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
3 contributors

Users who have contributed to this file

@travislee8964 @HarukaMa @twilightgod
executable file 358 lines (323 sloc) 10.1 KB
#!/bin/bash
####################################################
# #
# This is a L2TP VPN installation for CentOS 7 #
# Version: 1.1.0 20140803 #
# Author: Travis Lee #
# Website: http://www.stunnel.info #
# #
####################################################
#检测是否是root用户
if [[ $(id -u) != "0" ]]; then
printf "\e[42m\e[31mError: You must be root to run this install script.\e[0m\n"
exit 1
fi
#检测是否是CentOS 7或者RHEL 7
if [[ $(grep "release 7." /etc/redhat-release 2>/dev/null | wc -l) -eq 0 ]]; then
printf "\e[42m\e[31mError: Your OS is NOT CentOS 7 or RHEL 7.\e[0m\n"
printf "\e[42m\e[31mThis install script is ONLY for CentOS 7 and RHEL 7.\e[0m\n"
exit 1
fi
clear
printf "
####################################################
# #
# This is a L2TP VPN installation for CentOS 7 #
# Version: 1.1.0 20140803 #
# Author: Travis Lee #
# Website: http://www.stunnel.info #
# #
####################################################
"
#获取服务器IP
serverip=$(ifconfig -a |grep -w "inet"| grep -v "127.0.0.1" |awk '{print $2;}')
printf "\e[33m$serverip\e[0m is the server IP?"
printf "If \e[33m$serverip\e[0m is \e[33mcorrect\e[0m, press enter directly."
printf "If \e[33m$serverip\e[0m is \e[33mincorrect\e[0m, please input your server IP."
printf "(Default server IP: \e[33m$serverip\e[0m):"
read serveriptmp
if [[ -n "$serveriptmp" ]]; then
serverip=$serveriptmp
fi
#获取网卡接口名称
ethlist=$(ifconfig | grep ": flags" | cut -d ":" -f1)
eth=$(printf "$ethlist\n" | head -n 1)
if [[ $(printf "$ethlist\n" | wc -l) -gt 2 ]]; then
echo ======================================
echo "Network Interface list:"
printf "\e[33m$ethlist\e[0m\n"
echo ======================================
echo "Which network interface you want to listen for ocserv?"
printf "Default network interface is \e[33m$eth\e[0m, let it blank to use default network interface: "
read ethtmp
if [ -n "$ethtmp" ]; then
eth=$ethtmp
fi
fi
#设置VPN拨号后分配的IP段
iprange="10.0.1"
echo "Please input IP-Range:"
printf "(Default IP-Range: \e[33m$iprange\e[0m): "
read iprangetmp
if [[ -n "$iprangetmp" ]]; then
iprange=$iprangetmp
fi
#设置预共享密钥
mypsk="stunnel.info"
echo "Please input PSK:"
printf "(Default PSK: \e[33mstunnel.info\e[0m): "
read mypsktmp
if [[ -n "$mypsktmp" ]]; then
mypsk=$mypsktmp
fi
#设置VPN用户名
username="stunnel"
echo "Please input VPN username:"
printf "(Default VPN username: \e[33mstunnel\e[0m): "
read usernametmp
if [[ -n "$usernametmp" ]]; then
username=$usernametmp
fi
#随机密码
randstr() {
index=0
str=""
for i in {a..z}; do arr[index]=$i; index=$(expr ${index} + 1); done
for i in {A..Z}; do arr[index]=$i; index=$(expr ${index} + 1); done
for i in {0..9}; do arr[index]=$i; index=$(expr ${index} + 1); done
for i in {1..10}; do str="$str${arr[$RANDOM%$index]}"; done
echo $str
}
#设置VPN用户密码
password=$(randstr)
printf "Please input \e[33m$username\e[0m's password:\n"
printf "Default password is \e[33m$password\e[0m, let it blank to use default password: "
read passwordtmp
if [[ -n "$passwordtmp" ]]; then
password=$passwordtmp
fi
clear
#打印配置参数
clear
echo "Server IP:"
echo "$serverip"
echo
echo "Server Local IP:"
echo "$iprange.1"
echo
echo "Client Remote IP Range:"
echo "$iprange.10-$iprange.254"
echo
echo "PSK:"
echo "$mypsk"
echo
echo "Press any key to start..."
get_char() {
SAVEDSTTY=`stty -g`
stty -echo
stty cbreak
dd if=/dev/tty bs=1 count=1 2> /dev/null
stty -raw
stty echo
stty $SAVEDSTTY
}
char=$(get_char)
clear
mknod /dev/random c 1 9
#安装依赖的组件
yum -y update
yum install -y openswan ppp xl2tpd wget
rm -f /etc/ipsec.conf
#创建ipsec.conf配置文件
cat >>/etc/ipsec.conf<<EOF
# /etc/ipsec.conf - Libreswan IPsec configuration file
# This file: /etc/ipsec.conf
#
# Enable when using this configuration file with openswan instead of libreswan
#version 2
#
# Manual: ipsec.conf.5
# basic configuration
config setup
# NAT-TRAVERSAL support, see README.NAT-Traversal
nat_traversal=yes
# exclude networks used on server side by adding %v4:!a.b.c.0/24
virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
# OE is now off by default. Uncomment and change to on, to enable.
oe=off
# which IPsec stack to use. auto will try netkey, then klips then mast
protostack=netkey
force_keepalive=yes
keep_alive=1800
conn L2TP-PSK-NAT
rightsubnet=vhost:%priv
also=L2TP-PSK-noNAT
conn L2TP-PSK-noNAT
authby=secret
pfs=no
auto=add
keyingtries=3
rekey=no
ikelifetime=8h
keylife=1h
type=transport
left=$serverip
leftid=$serverip
leftprotoport=17/1701
right=%any
rightprotoport=17/%any
dpddelay=40
dpdtimeout=130
dpdaction=clear
# For example connections, see your distribution's documentation directory,
# or the documentation which could be located at
# /usr/share/docs/libreswan-3.*/ or look at https://www.libreswan.org/
#
# There is also a lot of information in the manual page, "man ipsec.conf"
# You may put your configuration (.conf) file in the "/etc/ipsec.d/" directory
# by uncommenting this line
#include /etc/ipsec.d/*.conf
EOF
#设置预共享密钥配置文件
rm -f /etc/ipsec.secrets
cat >>/etc/ipsec.secrets<<EOF
#include /etc/ipsec.d/*.secrets
$serverip %any: PSK "$mypsk"
EOF
#创建xl2tpd.conf配置文件
mkdir -p /etc/xl2tpd
rm -f /etc/xl2tpd/xl2tpd.conf
cat >>/etc/xl2tpd/xl2tpd.conf<<EOF
;
; This is a minimal sample xl2tpd configuration file for use
; with L2TP over IPsec.
;
; The idea is to provide an L2TP daemon to which remote Windows L2TP/IPsec
; clients connect. In this example, the internal (protected) network
; is 192.168.1.0/24. A special IP range within this network is reserved
; for the remote clients: 192.168.1.128/25
; (i.e. 192.168.1.128 ... 192.168.1.254)
;
; The listen-addr parameter can be used if you want to bind the L2TP daemon
; to a specific IP address instead of to all interfaces. For instance,
; you could bind it to the interface of the internal LAN (e.g. 192.168.1.98
; in the example below). Yet another IP address (local ip, e.g. 192.168.1.99)
; will be used by xl2tpd as its address on pppX interfaces.
[global]
; ipsec saref = yes
listen-addr = $serverip
auth file = /etc/ppp/chap-secrets
port = 1701
[lns default]
ip range = $iprange.10-$iprange.254
local ip = $iprange.1
refuse chap = yes
refuse pap = yes
require authentication = yes
name = L2TPVPN
ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes
EOF
#创建options.xl2tpd配置文件
mkdir -p /etc/ppp
rm -f /etc/ppp/options.xl2tpd
cat >>/etc/ppp/options.xl2tpd<<EOF
#require-pap
#require-chap
#require-mschap
ipcp-accept-local
ipcp-accept-remote
require-mschap-v2
ms-dns 8.8.8.8
ms-dns 8.8.4.4
asyncmap 0
auth
crtscts
lock
hide-password
modem
debug
name l2tpd
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
mtu 1400
noccp
connect-delay 5000
# To allow authentication against a Windows domain EXAMPLE, and require the
# user to be in a group "VPN Users". Requires the samba-winbind package
# require-mschap-v2
# plugin winbind.so
# ntlm_auth-helper '/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1 --require-membership-of="EXAMPLE\VPN Users"'
# You need to join the domain on the server, for example using samba:
# http://rootmanager.com/ubuntu-ipsec-l2tp-windows-domain-auth/setting-up-openswan-xl2tpd-with-native-windows-clients-lucid.html
EOF
#创建chap-secrets配置文件,即用户列表及密码
rm -f /etc/ppp/chap-secrets
cat >>/etc/ppp/chap-secrets<<EOF
# Secrets for authentication using CHAP
# client server secret IP addresses
$username l2tpd $password *
EOF
#修改系统配置,允许IP转发
sysctl -w net.ipv4.ip_forward=1
sysctl -w net.ipv4.conf.all.rp_filter=0
sysctl -w net.ipv4.conf.default.rp_filter=0
sysctl -w net.ipv4.conf.$eth.rp_filter=0
sysctl -w net.ipv4.conf.all.send_redirects=0
sysctl -w net.ipv4.conf.default.send_redirects=0
sysctl -w net.ipv4.conf.all.accept_redirects=0
sysctl -w net.ipv4.conf.default.accept_redirects=0
cat >>/etc/sysctl.conf<<EOF
net.ipv4.ip_forward = 1
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.$eth.rp_filter = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
EOF
#允许防火墙端口
cat >/usr/lib/firewalld/services/l2tpd.xml<<EOF
<?xml version="1.0" encoding="utf-8"?>
<service>
<short>l2tpd</short>
<description>L2TP IPSec</description>
<port protocol="udp" port="500"/>
<port protocol="udp" port="4500"/>
<port protocol="udp" port="1701"/>
</service>
EOF
firewall-cmd --permanent --add-service=l2tpd
firewall-cmd --permanent --add-service=ipsec
firewall-cmd --permanent --add-masquerade
firewall-cmd --reload
#iptables --table nat --append POSTROUTING --jump MASQUERADE
#iptables -t nat -A POSTROUTING -s $iprange.0/24 -o $eth -j MASQUERADE
#iptables -t nat -A POSTROUTING -s $iprange.0/24 -j SNAT --to-source $serverip
#service iptables save
#允许开机启动
systemctl enable ipsec xl2tpd
systemctl restart ipsec xl2tpd
clear
#测试ipsec
ipsec verify
printf "
####################################################
# #
# This is a L2TP VPN installation for CentOS 7 #
# Version: 1.1.0 20140803 #
# Author: Travis Lee #
# Website: http://www.stunnel.info #
# #
####################################################
if there are no [FAILED] above, then you can
connect to your L2TP VPN Server with the default
user/password below:
ServerIP: $serverip
username: $username
password: $password
PSK: $mypsk
"
You can’t perform that action at this time.