diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 507b9a368be..1815b2900dd 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -22,6 +22,63 @@ static struct phy_driver KSZ804_driver = {
 	.shutdown = &genphy_shutdown,
 };
 
+/**
+ * KSZ8895
+ */
+
+static unsigned short smireg_to_phy(unsigned short reg)
+{
+	return ((reg & 0xc0) >> 3) + 0x06 + ((reg & 0x20) >> 5);
+}
+
+static unsigned short smireg_to_reg(unsigned short reg)
+{
+	return reg & 0x1F;
+}
+
+static void ksz8895_write_smireg(struct phy_device *phydev, int smireg, int val)
+{
+	phydev->bus->write(phydev->bus, smireg_to_phy(smireg), MDIO_DEVAD_NONE,
+						smireg_to_reg(smireg), val);
+}
+
+#if 0
+static int ksz8895_read_smireg(struct phy_device *phydev, int smireg)
+{
+	return phydev->bus->read(phydev->bus, smireg_to_phy(smireg),
+					MDIO_DEVAD_NONE, smireg_to_reg(smireg));
+}
+#endif
+
+int ksz8895_config(struct phy_device *phydev)
+{
+	/* we are connected directly to the switch without
+	 * dedicated PHY. SCONF1 == 001 */
+	phydev->link = 1;
+	phydev->duplex = DUPLEX_FULL;
+	phydev->speed = SPEED_100;
+
+	/* Force the switch to start */
+	ksz8895_write_smireg(phydev, 1, 1);
+
+	return 0;
+}
+
+static int ksz8895_startup(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static struct phy_driver ksz8895_driver = {
+	.name = "Micrel KSZ8895/KSZ8864",
+	.uid  = 0x221450,
+	.mask = 0xffffe1,
+	.features = PHY_BASIC_FEATURES,
+	.config   = &ksz8895_config,
+	.startup  = &ksz8895_startup,
+	.shutdown = &genphy_shutdown,
+};
+
 #ifndef CONFIG_PHY_MICREL_KSZ9021
 /*
  * I can't believe Micrel used the exact same part number
@@ -221,5 +278,6 @@ int phy_micrel_init(void)
 	phy_register(&KS8721_driver);
 #endif
 	phy_register(&ksz9031_driver);
+	phy_register(&ksz8895_driver);
 	return 0;
 }